-.TH MONKEYSPHERE-SERVER "8" "June 2008" "monkeysphere" "User Commands"
+.TH MONKEYSPHERE-SERVER "8" "March 2009" "monkeysphere" "User Commands"
.SH NAME
-monkeysphere-host \- Monkeysphere host admin tool.
+monkeysphere\-host - Monkeysphere host admin tool.
.SH SYNOPSIS
-.B monkeysphere-host \fIsubcommand\fP [\fIargs\fP]
-.br
-.B monkeysphere-host expert \fIexpert-subcommand\fP [\fIargs\fP]
+.B monkeysphere\-host \fIsubcommand\fP [\fIargs\fP]
.SH DESCRIPTION
added to the authorized_keys and known_hosts files used by OpenSSH for
connection authentication.
-\fBmonkeysphere-host\fP is a Monkeysphere server admin utility.
+\fBmonkeysphere\-host\fP is a Monkeysphere server admin utility for
+managing the host's OpenPGP host key.
.SH SUBCOMMANDS
-\fBmonkeysphere-host\fP takes various subcommands:
+\fBmonkeysphere\-host\fP takes various subcommands:
.TP
-.B extend-key EXPIRE
+.B import\-key FILE NAME[:PORT]
+Import a pem-encoded ssh secret host key from file FILE. If FILE is
+`\-', then the key will be imported from stdin. Only RSA keys are
+supported at the moment. NAME[:PORT] is used to specify the
+fully-qualified hostname (and port) used in the user ID of the new
+OpenPGP key. If PORT is not specified, the no port is added to the
+user ID, which means port 22 is assumed. `i' may be used in place of
+`import\-key'.
+.TP
+.B show\-key
+Output information about host's OpenPGP and SSH keys. `s' may be used
+in place of `show\-key'.
+.TP
+.B set\-expire [EXPIRE]
Extend the validity of the OpenPGP key for the host until EXPIRE from
the present. If EXPIRE is not specified, then the user will be
-prompted for the extension term. Expiration is specified like GnuPG
-does:
+prompted for the extension term. Expiration is specified as with
+GnuPG (measured from today's date):
.nf
0 = key does not expire
<n> = key expires in n days
<n>m = key expires in n months
<n>y = key expires in n years
.fi
-`e' may be used in place of `extend-key'.
-
+`e' may be used in place of `set\-expire'.
.TP
-.B add-hostname HOSTNAME
+.B add\-hostname HOSTNAME
Add a hostname user ID to the server host key. `n+' may be used in
-place of `add-hostname'.
+place of `add\-hostname'.
.TP
-.B revoke-hostname HOSTNAME
-Revoke a hostname user ID from the server host key. `n-' may be used
-in place of `revoke-hostname'.
+.B revoke\-hostname HOSTNAME
+Revoke a hostname user ID from the server host key. `n\-' may be used
+in place of `revoke\-hostname'.
.TP
-.B add-revoker FINGERPRINT
-
+.B add\-revoker KEYID|FILE
+Add a revoker to the host's OpenPGP key. The key ID will be loaded
+from the keyserver. A file may be loaded instead of pulling the key
+from the keyserver by specifying the path to the file as the argument,
+or by specifying `\-' to load from stdin. `r+' may be be used in place
+of `add-revoker'.
.TP
-.B show-key
-Output gpg information about host's OpenPGP key. `s' may be used in
-place of `show-key'.
+.B revoke\-key
+Generate (with the option to publish) a revocation certificate for the
+host's OpenPGP key. If such a certificate is published, your host key
+will be permanently revoked. This subcommand will ask you a series of
+questions, and then generate a key revocation certificate, sending it
+to stdout. If you explicitly tell it to publish the revocation
+certificate immediately, it will send it to the public keyservers.
+USE WITH CAUTION!
.TP
-.B publish-key
-Publish the host's OpenPGP key to the keyserver. `p' may be used in
-place of `publish-key'.
+.B publish\-key
+Publish the host's OpenPGP key to the public keyservers. `p' may be
+used in place of `publish-key'. Note that there is no way to remove a
+key from the public keyservers once it is published!
.TP
.B help
Output a brief usage summary. `h' or `?' may be used in place of
.TP
.B version
show version number
-.SH "EXPERT" SUBCOMMANDS
-Some commands are very unlikely to be needed by most administrators.
-These commands must follow the word `expert'.
-.TP
-.B gen-key [HOSTNAME]
-Generate a OpenPGP key for the host. If HOSTNAME is not specified,
-then the system fully-qualified domain name will be user. An
-alternate key bit length can be specified with the `-l' or `--length'
-option (default 2048). An expiration length can be specified with the
-`-e' or `--expire' option (prompt otherwise). The expiration format
-is the same as that of \fBextend-key\fP, below. A key revoker
-fingerprint can be specified with the `-r' or `--revoker' option. `g'
-may be used in place of `gen-key'.
+
+Other commands:
.TP
.B diagnostics
-Review the state of the server with respect to the MonkeySphere in
-general and report on suggested changes. Among other checks, this
-includes making sure there is a valid host key, that the key is
-published, that the sshd configuration points to the right place, and
-that there are at least some valid identity certifiers. `d' may be
-used in place of `diagnostics'.
-.TP
-.B import-key
-FIXME:
- import-key (i) import existing ssh key to gpg
- --hostname (-h) NAME[:PORT] hostname for key user ID
- --keyfile (-f) FILE key file to import
- --expire (-e) EXPIRE date to expire
+Review the state of the monkeysphere server host key and report on
+suggested changes. Among other checks, this includes making sure
+there is a valid host key, that the key is published, that the sshd
+configuration points to the right place, etc. `d' may be used in
+place of `diagnostics'.
+
+.SH SETUP HOST AUTHENTICATION
-.SH SETUP
+To enable host verification via the monkeysphere, an OpenPGP key must
+be made out of the host's ssh key, and the key must be published to
+the Web of Trust. This is not done by default. The first step is to
+import the host's ssh key into a monkeysphere-style OpenPGP key. This
+is done with the import\-key command. When importing a key, you must
+specify the path to the host's ssh RSA key to import, and a hostname
+to use as the key's user ID:
-In order to start using the monkeysphere, you must first generate an
-OpenPGP key for the server and convert that key to an ssh key that can
-be used by ssh for host authentication. This can be done with the
-\fBgen-key\fP subcommand:
+# monkeysphere\-host import\-key /etc/ssh/ssh_host_rsa_key host.example.org
-$ monkeysphere-server gen-key
+On most systems, the ssh host RSA key is stored at
+/etc/ssh/ssh_host_rsa_key.
-To enable host verification via the monkeysphere, you must then
-publish the host's key to the Web of Trust using the \fBpublish-key\fP
-command to push the key to a keyserver. You must also modify the
-sshd_config on the server to tell sshd where the new server host key
-is located:
+Once the host key has been imported, it must be published to the Web
+of Trust so that users can retrieve the key when sshing to the host.
+The host key is published to the keyserver with the publish\-key
+command:
-HostKey /var/lib/monkeysphere/ssh_host_rsa_key
+$ monkeysphere\-host publish\-key
In order for users logging into the system to be able to identify the
host via the monkeysphere, at least one person (e.g. a server admin)
will need to sign the host's key. This is done using standard OpenPGP
-keysigning techniques, usually: pul the key from the keyserver, verify
-and sign the key, and then re-publish the signature. Once an admin's
-signature is published, users logging into the host can use it to
-validate the host's key.
+keysigning techniques, usually: pull the key from the keyserver,
+verify and sign the key, and then re-publish the signature. Please
+see http://web.monkeysphere.info/signing-host-keys/ for more
+information. Once an admin's signature is published, users logging
+into the host can use it to validate the host's key without having to
+manually check the host key's fingerprint.
+
+.SH ENVIRONMENT
+The following environment variables will override those specified in
+the config file (defaults in parentheses):
.TP
MONKEYSPHERE_LOG_LEVEL
-Set the log level (INFO). Can be SILENT, ERROR, INFO, VERBOSE, DEBUG, in
-increasing order of verbosity.
+Set the log level. Can be SILENT, ERROR, INFO, VERBOSE, DEBUG, in
+increasing order of verbosity. (INFO)
.TP
MONKEYSPHERE_KEYSERVER
-OpenPGP keyserver to use (subkeys.pgp.net).
+OpenPGP keyserver to use. (pool.sks\-keyservers.net)
+.TP
+MONKEYSPHERE_PROMPT
+If set to `false', never prompt the user for confirmation. (true)
.SH FILES
+
.TP
-/etc/monkeysphere/monkeysphere-host.conf
-System monkeysphere-host config file.
+/etc/monkeysphere/monkeysphere\-host.conf
+System monkeysphere\-host config file.
.TP
-/var/lib/monkeysphere/ssh_host_rsa_key
-Copy of the host's private key in ssh format, suitable for use by
-sshd.
+/var/lib/monkeysphere/host/ssh_host_rsa_key.pub.gpg
+A world-readable copy of the host's public key in OpenPGP format,
+including all relevant self-signatures.
.SH AUTHOR
-Written by Jameson Rollins <jrollins@fifthhorseman.net>, Daniel Kahn
-Gillmor <dkg@fifthhorseman.net>
+This man page was written by:
+Jameson Rollins <jrollins@fifthhorseman.net>,
+Daniel Kahn Gillmor <dkg@fifthhorseman.net>,
+Matthew Goins <mjgoins@openflows.com>
.SH SEE ALSO
.BR monkeysphere (1),
-.BR monkeysphere-authentication (8),
+.BR monkeysphere\-authentication (8),
.BR monkeysphere (7),
.BR gpg (1),
-.BR ssh (1)
+.BR ssh (1),
+.BR sshd (8)
projects / monkeysphere.git / blobdiff