#
# Written by
# Jameson Rollins <jrollins@fifthhorseman.net>
+# Jamie McClelland <jm@mayfirst.org>
+# Daniel Kahn Gillmor <dkg@fifthhorseman.net>
#
# Copyright 2008, released under the GPL, version 3 or later
exit ${2:-'255'}
}
-# write output to stderr
+# write output to stderr based on specified LOG_LEVEL the first
+# parameter is the priority of the output, and everything else is what
+# is echoed to stderr
log() {
- echo -n "ms: " >&2
- echo "$@" >&2
-}
+ local priority
+ local level
+ local output
+ # don't include SILENT in alllevels: it's handled separately
+ # list in decreasing verbosity (all caps)
+ local alllevels="DEBUG INFO ERROR"
+ local found=
+
+ # translate lowers to uppers in global log level
+ LOG_LEVEL=$(echo "$LOG_LEVEL" | tr "[:lower:]" "[:upper:]")
+
+ # just go ahead and return if the log level is silent
+ if [ "$LOG_LEVEL" = 'SILENT' ] ; then
+ return
+ fi
-loge() {
- echo "$@" >&2
+ for level in $alllevels; do
+ if [ "$LOG_LEVEL" = "$level" ] ; then
+ found=true
+ fi
+ done
+ if [ -z "$found" ] ; then
+ # default to INFO:
+ LOG_LEVEL=INFO
+ fi
+
+ # get priority from first parameter, translating all lower to
+ # uppers
+ priority=$(echo "$1" | tr "[:lower:]" "[:upper:]")
+ shift
+
+ # scan over available levels
+ for level in $alllevels ; do
+ # output if the log level matches, set output to true
+ # this will output for all subsequent loops as well.
+ if [ "$LOG_LEVEL" = "$level" ] ; then
+ output=true
+ fi
+ if [ "$priority" = "$level" -a "$output" = 'true' ] ; then
+ echo -n "ms: " >&2
+ echo "$@" >&2
+ fi
+ done
}
# cut out all comments(#) and blank lines from standard input
userID="$1"
- log -n " checking keyserver $KEYSERVER... "
+ log info " checking keyserver $KEYSERVER... "
echo 1,2,3,4,5 | \
gpg --quiet --batch --with-colons \
--command-fd 0 --keyserver "$KEYSERVER" \
--search ="$userID" > /dev/null 2>&1
returnCode="$?"
- loge "done."
# if the user is the monkeysphere user, then update the
# monkeysphere user's trustdb
# (see /usr/share/doc/gnupg/DETAILS.gz)
# output is one line for every found key, in the following format:
#
-# flag:fingerprint
+# flag:sshKey
#
# "flag" is an acceptability flag, 0 = ok, 1 = bad
-# "fingerprint" is the fingerprint of the key
+# "sshKey" is the translated gpg key
+#
+# all log output must go to stderr, as stdout is used to pass the
+# flag:sshKey to the calling function.
#
# expects global variable: "MODE"
process_user_id() {
# if the gpg query return code is not 0, return 1
if [ "$?" -ne 0 ] ; then
- log " no primary keys found."
+ log error " no primary keys found."
return 1
fi
lastKeyOK=
fingerprint=
- log " primary key found: $keyid"
+ log error " primary key found: $keyid"
# if overall key is not valid, skip
if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then
- log " - unacceptable primary key validity ($validity)."
+ log error " - unacceptable primary key validity ($validity)."
continue
fi
# if overall key is disabled, skip
if check_capability "$usage" 'D' ; then
- log " - key disabled."
+ log error " - key disabled."
continue
fi
# if overall key capability is not ok, skip
if ! check_capability "$usage" $requiredPubCapability ; then
- log " - unacceptable primary key capability ($usage)."
+ log error " - unacceptable primary key capability ($usage)."
continue
fi
;;
'uid') # user ids
if [ "$lastKey" != pub ] ; then
- log " - got a user ID after a sub key?! user IDs should only follow primary keys!"
+ log error " - got a user ID after a sub key?! user IDs should only follow primary keys!"
continue
fi
# if an acceptable user ID was already found, skip
# output a line for the primary key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable primary key."
+ log error " * acceptable primary key."
if [ -z "$sshKey" ] ; then
- log " ! primary key could not be translated (not RSA or DSA?)."
+ log error " ! primary key could not be translated (not RSA or DSA?)."
else
echo "0:${sshKey}"
fi
else
- log " - unacceptable primary key."
+ log error " - unacceptable primary key."
if [ -z "$sshKey" ] ; then
- log " ! primary key could not be translated (not RSA or DSA?)."
+ log error " ! primary key could not be translated (not RSA or DSA?)."
else
echo "1:${sshKey}"
fi
# output a line for the sub key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable sub key."
+ log error " * acceptable sub key."
if [ -z "$sshKey" ] ; then
- log " ! sub key could not be translated (not RSA or DSA?)."
+ log error " ! sub key could not be translated (not RSA or DSA?)."
else
echo "0:${sshKey}"
fi
else
- log " - unacceptable sub key."
+ log error " - unacceptable sub key."
if [ -z "$sshKey" ] ; then
- log " ! sub key could not be translated (not RSA or DSA?)."
+ log error " ! sub key could not be translated (not RSA or DSA?)."
else
echo "1:${sshKey}"
fi
host="$1"
userID="ssh://${host}"
- log "processing: $host"
+ log info "processing: $host"
nKeys=0
nKeysOK=0
# note if the known_hosts file was updated
if [ "$(file_hash "$KNOWN_HOSTS")" != "$fileCheck" ] ; then
- log "known_hosts file updated."
+ log info "known_hosts file updated."
fi
# if an acceptable host was found, return 0
process_known_hosts() {
local hosts
- log "processing known_hosts file..."
+ log info "processing known_hosts file..."
hosts=$(meat "$KNOWN_HOSTS" | cut -d ' ' -f 1 | grep -v '^|.*$' | tr , ' ' | tr '\n' ' ')
if [ -z "$hosts" ] ; then
- log "no hosts to process."
+ log error "no hosts to process."
return
fi
userID="$1"
- log "processing: $userID"
+ log info "processing: $userID"
nKeys=0
nKeysOK=0
# note if the authorized_keys file was updated
if [ "$(file_hash "$AUTHORIZED_KEYS")" != "$fileCheck" ] ; then
- log "authorized_keys file updated."
+ log info "authorized_keys file updated."
fi
# if an acceptable id was found, return 0
authorizedUserIDs="$1"
- log "processing authorized_user_ids file..."
+ log info "processing authorized_user_ids file..."
if ! meat "$authorizedUserIDs" > /dev/null ; then
- log "no user IDs to process."
+ log error "no user IDs to process."
return
fi
projects / monkeysphere.git / blobdiff