#
# Written by
# Jameson Rollins <jrollins@fifthhorseman.net>
+# Jamie McClelland <jm@mayfirst.org>
+# Daniel Kahn Gillmor <dkg@fifthhorseman.net>
#
# Copyright 2008, released under the GPL, version 3 or later
# managed directories
ETC="/etc/monkeysphere"
export ETC
-CACHE="/var/cache/monkeysphere"
-export CACHE
########################################################################
### UTILITY FUNCTIONS
+# failure function. exits with code 255, unless specified otherwise.
failure() {
echo "$1" >&2
- exit ${2:-'1'}
+ exit ${2:-'255'}
}
-# write output to stderr
+# write output to stderr based on specified LOG_LEVEL the first
+# parameter is the priority of the output, and everything else is what
+# is echoed to stderr
log() {
- echo -n "ms: " 1>&2
- echo "$@" 1>&2
-}
+ local priority
+ local level
+ local output
+ local alllevels
+ local found=
+
+ # don't include SILENT in alllevels: it's handled separately
+ # list in decreasing verbosity (all caps).
+ # separate with $IFS explicitly, since we do some fancy footwork
+ # elsewhere.
+ alllevels="DEBUG${IFS}VERBOSE${IFS}INFO${IFS}ERROR"
+
+ # translate lowers to uppers in global log level
+ LOG_LEVEL=$(echo "$LOG_LEVEL" | tr "[:lower:]" "[:upper:]")
+
+ # just go ahead and return if the log level is silent
+ if [ "$LOG_LEVEL" = 'SILENT' ] ; then
+ return
+ fi
-loge() {
- echo "$@" 1>&2
+ for level in $alllevels ; do
+ if [ "$LOG_LEVEL" = "$level" ] ; then
+ found=true
+ fi
+ done
+ if [ -z "$found" ] ; then
+ # default to INFO:
+ LOG_LEVEL=INFO
+ fi
+
+ # get priority from first parameter, translating all lower to
+ # uppers
+ priority=$(echo "$1" | tr "[:lower:]" "[:upper:]")
+ shift
+
+ # scan over available levels
+ for level in $alllevels ; do
+ # output if the log level matches, set output to true
+ # this will output for all subsequent loops as well.
+ if [ "$LOG_LEVEL" = "$level" ] ; then
+ output=true
+ fi
+ if [ "$priority" = "$level" -a "$output" = 'true' ] ; then
+ echo -n "ms: " >&2
+ echo "$@" >&2
+ fi
+ done
}
# cut out all comments(#) and blank lines from standard input
meat() {
- grep -v -e "^[[:space:]]*#" -e '^$'
+ grep -v -e "^[[:space:]]*#" -e '^$' "$1"
}
# cut a specified line from standard input
cutline() {
- head --line="$1" | tail -1
+ head --line="$1" "$2" | tail -1
}
# check that characters are in a string (in an AND fashion).
return 0
}
-# convert escaped characters from gpg output back into original
-# character
-# FIXME: undo all escape character translation in with-colons gpg output
-unescape() {
- echo "$1" | sed 's/\\x3a/:/'
+# hash of a file
+file_hash() {
+ md5sum "$1" 2> /dev/null
+}
+
+# convert escaped characters in pipeline from gpg output back into
+# original character
+# FIXME: undo all escape character translation in with-colons gpg
+# output
+gpg_unescape() {
+ sed 's/\\x3a/:/g'
+}
+
+# convert nasty chars into gpg-friendly form in pipeline
+# FIXME: escape everything, not just colons!
+gpg_escape() {
+ sed 's/:/\\x3a/g'
+}
+
+# prompt for GPG-formatted expiration, and emit result on stdout
+get_gpg_expiration() {
+ local keyExpire
+
+ keyExpire="$1"
+
+ if [ -z "$keyExpire" ]; then
+ cat >&2 <<EOF
+Please specify how long the key should be valid.
+ 0 = key does not expire
+ <n> = key expires in n days
+ <n>w = key expires in n weeks
+ <n>m = key expires in n months
+ <n>y = key expires in n years
+EOF
+ while [ -z "$keyExpire" ] ; do
+ read -p "Key is valid for? (0) " keyExpire
+ if ! test_gpg_expire ${keyExpire:=0} ; then
+ echo "invalid value" >&2
+ unset keyExpire
+ fi
+ done
+ elif ! test_gpg_expire "$keyExpire" ; then
+ failure "invalid key expiration value '$keyExpire'."
+ fi
+
+ echo "$keyExpire"
+}
+
+passphrase_prompt() {
+ local prompt="$1"
+ local fifo="$2"
+ local PASS
+
+ if [ "$DISPLAY" ] && which "${SSH_ASKPASS:-ssh-askpass}" >/dev/null; then
+ "${SSH_ASKPASS:-ssh-askpass}" "$prompt" > "$fifo"
+ else
+ read -s -p "$prompt" PASS
+ # Uses the builtin echo, so should not put the passphrase into
+ # the process table. I think. --dkg
+ echo "$PASS" > "$fifo"
+ fi
+}
+
+test_gnu_dummy_s2k_extension() {
+
+# this block contains a demonstration private key that has had the
+# primary key stripped out using the GNU S2K extension known as
+# "gnu-dummy" (see /usr/share/doc/gnupg/DETAILS.gz). The subkey is
+# present in cleartext, however.
+
+# openpgp2ssh will be able to deal with this based on whether the
+# local copy of GnuTLS contains read_s2k support that can handle it.
+
+# read up on that here:
+
+# http://lists.gnu.org/archive/html/gnutls-devel/2008-08/msg00005.html
+
+echo "
+-----BEGIN PGP PRIVATE KEY BLOCK-----
+Version: GnuPG v1.4.9 (GNU/Linux)
+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+=CR5w
+-----END PGP PRIVATE KEY BLOCK-----
+" | openpgp2ssh 4129E89D17C1D591 >/dev/null 2>/dev/null
+
}
# remove all lines with specified string from specified file
file="$1"
string="$2"
- if [ "$file" -a "$string" ] ; then
- grep -v "$string" "$file" | sponge "$file"
+ if [ -z "$file" -o -z "$string" ] ; then
+ return 1
+ fi
+
+ if [ ! -e "$file" ] ; then
+ return 1
+ fi
+
+ # if the string is in the file...
+ if grep -q -F "$string" "$file" 2> /dev/null ; then
+ # remove the line with the string, and return 0
+ grep -v -F "$string" "$file" | sponge "$file"
+ return 0
+ # otherwise return 1
+ else
+ return 1
+ fi
+}
+
+# remove all lines with MonkeySphere strings in file
+remove_monkeysphere_lines() {
+ local file
+
+ file="$1"
+
+ if [ -z "$file" ] ; then
+ return 1
+ fi
+
+ if [ ! -e "$file" ] ; then
+ return 1
+ fi
+
+ egrep -v '^MonkeySphere[[:digit:]]{4}(-[[:digit:]]{2}){2}T[[:digit:]]{2}(:[[:digit:]]{2}){2}$' \
+ "$file" | sponge "$file"
+}
+
+# translate ssh-style path variables %h and %u
+translate_ssh_variables() {
+ local uname
+ local home
+
+ uname="$1"
+ path="$2"
+
+ # get the user's home directory
+ userHome=$(getent passwd "$uname" | cut -d: -f6)
+
+ # translate '%u' to user name
+ path=${path/\%u/"$uname"}
+ # translate '%h' to user home directory
+ path=${path/\%h/"$userHome"}
+
+ echo "$path"
+}
+
+# test that a string to conforms to GPG's expiration format
+test_gpg_expire() {
+ echo "$1" | egrep -q "^[0-9]+[mwy]?$"
+}
+
+# check that a file is properly owned, and that all it's parent
+# directories are not group/other writable
+check_key_file_permissions() {
+ local user
+ local path
+ local access
+ local gAccess
+ local oAccess
+
+ # function to check that an octal corresponds to writability
+ is_write() {
+ [ "$1" -eq 2 -o "$1" -eq 3 -o "$1" -eq 6 -o "$1" -eq 7 ]
+ }
+
+ user="$1"
+ path="$2"
+
+ # return 0 is path does not exist
+ [ -e "$path" ] || return 0
+
+ owner=$(stat --format '%U' "$path")
+ access=$(stat --format '%a' "$path")
+ gAccess=$(echo "$access" | cut -c2)
+ oAccess=$(echo "$access" | cut -c3)
+
+ # check owner
+ if [ "$owner" != "$user" -a "$owner" != 'root' ] ; then
+ return 1
+ fi
+
+ # check group/other writability
+ if is_write "$gAccess" || is_write "$oAccess" ; then
+ return 2
+ fi
+
+ if [ "$path" = '/' ] ; then
+ return 0
+ else
+ check_key_file_permissions $(dirname "$path")
fi
}
-### CONVERTION UTILITIES
+### CONVERSION UTILITIES
# output the ssh key for a given key ID
gpg2ssh() {
local keyID
- #keyID="$1" #TMP
- # only use last 16 characters until openpgp2ssh can take all 40 #TMP
- keyID=$(echo "$1" | cut -c 25-) #TMP
+ keyID="$1"
gpg --export "$keyID" | openpgp2ssh "$keyID" 2> /dev/null
}
# (not just first N (5 in this case))
gpg_fetch_userid() {
local userID
+ local returnCode
+
+ if [ "$CHECK_KEYSERVER" != 'true' ] ; then
+ return 0
+ fi
userID="$1"
- log -n " checking keyserver $KEYSERVER... "
+ log info " checking keyserver $KEYSERVER... "
echo 1,2,3,4,5 | \
gpg --quiet --batch --with-colons \
--command-fd 0 --keyserver "$KEYSERVER" \
--search ="$userID" > /dev/null 2>&1
- loge "done."
-}
+ returnCode="$?"
-# get the full fingerprint of a key ID
-get_key_fingerprint() {
- local keyID
-
- keyID="$1"
+ # if the user is the monkeysphere user, then update the
+ # monkeysphere user's trustdb
+ if [ $(id -un) = "$MONKEYSPHERE_USER" ] ; then
+ gpg_authentication "--check-trustdb" > /dev/null 2>&1
+ fi
- gpg --list-key --with-colons --fixed-list-mode \
- --with-fingerprint "$keyID" | grep "$keyID" | \
- grep '^fpr:' | cut -d: -f10
+ return "$returnCode"
}
########################################################################
# (see /usr/share/doc/gnupg/DETAILS.gz)
# output is one line for every found key, in the following format:
#
-# flag fingerprint
+# flag:sshKey
#
# "flag" is an acceptability flag, 0 = ok, 1 = bad
-# "fingerprint" is the fingerprint of the key
+# "sshKey" is the translated gpg key
+#
+# all log output must go to stderr, as stdout is used to pass the
+# flag:sshKey to the calling function.
#
# expects global variable: "MODE"
process_user_id() {
fi
requiredPubCapability=$(echo "$requiredCapability" | tr "[:lower:]" "[:upper:]")
- # if CHECK_KEYSERVER variable set, check the keyserver
- # for the user ID
- if [ "$CHECK_KEYSERVER" = "true" ] ; then
- gpg_fetch_userid "$userID"
- fi
+ # fetch the user ID if necessary/requested
+ gpg_fetch_userid "$userID"
# output gpg info for (exact) userid and store
gpgOut=$(gpg --list-key --fixed-list-mode --with-colon \
# if the gpg query return code is not 0, return 1
if [ "$?" -ne 0 ] ; then
- log " - key not found."
+ log verbose " no primary keys found."
return 1
fi
# loop over all lines in the gpg output and process.
- # need to do it this way (as opposed to "while read...") so that
- # variables set in loop will be visible outside of loop
echo "$gpgOut" | cut -d: -f1,2,5,10,12 | \
while IFS=: read -r type validity keyid uidfpr usage ; do
# process based on record type
lastKeyOK=
fingerprint=
- log " primary key found: $keyid"
+ log verbose " primary key found: $keyid"
# if overall key is not valid, skip
if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then
- log " - unacceptable primary key validity ($validity)."
+ log error " - unacceptable primary key validity ($validity)."
continue
fi
# if overall key is disabled, skip
if check_capability "$usage" 'D' ; then
- log " - key disabled."
+ log error " - key disabled."
continue
fi
# if overall key capability is not ok, skip
if ! check_capability "$usage" $requiredPubCapability ; then
- log " - unacceptable primary key capability ($usage)."
+ log error " - unacceptable primary key capability ($usage)."
continue
fi
fi
;;
'uid') # user ids
- # if an acceptable user ID was already found, skip
- if [ "$uidOK" ] ; then
+ if [ "$lastKey" != pub ] ; then
+ log error " - got a user ID after a sub key?! user IDs should only follow primary keys!"
continue
fi
- # if the user ID does not match, skip
- if [ "$(unescape "$uidfpr")" != "$userID" ] ; then
+ # if an acceptable user ID was already found, skip
+ if [ "$uidOK" = 'true' ] ; then
continue
fi
- # if the user ID validity is not ok, skip
- if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then
+ # if the user ID does matches...
+ if [ "$(echo "$uidfpr" | gpg_unescape)" = "$userID" ] ; then
+ # and the user ID validity is ok
+ if [ "$validity" = 'u' -o "$validity" = 'f' ] ; then
+ # mark user ID acceptable
+ uidOK=true
+ fi
+ else
continue
fi
- # mark user ID acceptable
- uidOK=true
-
# output a line for the primary key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable key found."
- echo 0 "$fingerprint"
+ log verbose " * acceptable primary key."
+ if [ -z "$sshKey" ] ; then
+ log error " ! primary key could not be translated (not RSA or DSA?)."
+ else
+ echo "0:${sshKey}"
+ fi
else
- echo 1 "$fingerprint"
+ log error " - unacceptable primary key."
+ if [ -z "$sshKey" ] ; then
+ log error " ! primary key could not be translated (not RSA or DSA?)."
+ else
+ echo "1:${sshKey}"
+ fi
fi
;;
'sub') # sub keys
lastKey=sub
lastKeyOK=
fingerprint=
+
+ # don't bother with sub keys if the primary key is not valid
+ if [ "$keyOK" != true ] ; then
+ continue
+ fi
+ # don't bother with sub keys if no user ID is acceptable:
+ if [ "$uidOK" != true ] ; then
+ continue
+ fi
+
# if sub key validity is not ok, skip
if [ "$validity" != 'u' -a "$validity" != 'f' ] ; then
continue
'fpr') # key fingerprint
fingerprint="$uidfpr"
+ sshKey=$(gpg2ssh "$fingerprint")
+
# if the last key was the pub key, skip
if [ "$lastKey" = pub ] ; then
continue
fi
-
- # output a line for the last subkey
+
+ # output a line for the sub key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable key found."
- echo 0 "$fingerprint"
+ log verbose " * acceptable sub key."
+ if [ -z "$sshKey" ] ; then
+ log error " ! sub key could not be translated (not RSA or DSA?)."
+ else
+ echo "0:${sshKey}"
+ fi
else
- echo 1 "$fingerprint"
+ log error " - unacceptable sub key."
+ if [ -z "$sshKey" ] ; then
+ log error " ! sub key could not be translated (not RSA or DSA?)."
+ else
+ echo "1:${sshKey}"
+ fi
fi
;;
esac
- done
-}
-
-# update the cache for userid, and prompt to add file to
-# authorized_user_ids file if the userid is found in gpg
-# and not already in file.
-update_userid() {
- local userID
-
- userID="$1"
-
- log "processing userid: '$userID'"
-
- # process the user ID to pull it from keyserver
- process_user_id "$userID" | grep -q "^0 "
-
- # check if user ID is in the authorized_user_ids file
- if ! grep -q "^${userID}\$" "$AUTHORIZED_USER_IDS" ; then
- read -p "user ID not currently authorized. authorize? [Y|n]: " OK; OK=${OK:=Y}
- if [ ${OK/y/Y} = 'Y' ] ; then
- # add if specified
- log -n " adding user ID to authorized_user_ids file... "
- echo "$userID" >> "$AUTHORIZED_USER_IDS"
- loge "done."
- else
- # else do nothing
- log " authorized_user_ids file untouched."
- fi
- fi
-}
-
-# remove a userid from the authorized_user_ids file
-remove_userid() {
- local userID
-
- userID="$1"
-
- log "processing userid: '$userID'"
-
- # check if user ID is in the authorized_user_ids file
- if ! grep -q "^${userID}\$" "$AUTHORIZED_USER_IDS" ; then
- log " user ID not currently authorized."
- return 1
- fi
-
- # remove user ID from file
- log -n " removing user ID '$userID'... "
- remove_line "$AUTHORIZED_USER_IDS" "^${userID}$"
- loge "done."
+ done | sort -t: -k1 -n -r
+ # NOTE: this last sort is important so that the "good" keys (key
+ # flag '0') come last. This is so that they take precedence when
+ # being processed in the key files over "bad" keys (key flag '1')
}
-# process a host in known_host file
+# process a single host in the known_host file
process_host_known_hosts() {
local host
local userID
+ local nKeys
+ local nKeysOK
local ok
- local keyid
+ local sshKey
local tmpfile
host="$1"
userID="ssh://${host}"
- log "processing host: $host"
+ log verbose "processing: $host"
- process_user_id "ssh://${host}" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
- # remove the old host key line
+ nKeys=0
+ nKeysOK=0
+
+ IFS=$'\n'
+ for line in $(process_user_id "${userID}") ; do
+ # note that key was found
+ nKeys=$((nKeys+1))
+
+ ok=$(echo "$line" | cut -d: -f1)
+ sshKey=$(echo "$line" | cut -d: -f2)
+
+ if [ -z "$sshKey" ] ; then
+ continue
+ fi
+
+ # remove the old host key line, and note if removed
remove_line "$KNOWN_HOSTS" "$sshKey"
+
# if key OK, add new host line
if [ "$ok" -eq '0' ] ; then
+ # note that key was found ok
+ nKeysOK=$((nKeysOK+1))
+
# hash if specified
if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then
# FIXME: this is really hackish cause ssh-keygen won't
fi
fi
done
+
+ # if at least one key was found...
+ if [ "$nKeys" -gt 0 ] ; then
+ # if ok keys were found, return 0
+ if [ "$nKeysOK" -gt 0 ] ; then
+ return 0
+ # else return 2
+ else
+ return 2
+ fi
+ # if no keys were found, return 1
+ else
+ return 1
+ fi
+}
+
+# update the known_hosts file for a set of hosts listed on command
+# line
+update_known_hosts() {
+ local nHosts
+ local nHostsOK
+ local nHostsBAD
+ local fileCheck
+ local host
+
+ # the number of hosts specified on command line
+ nHosts="$#"
+
+ nHostsOK=0
+ nHostsBAD=0
+
+ # set the trap to remove any lockfiles on exit
+ trap "lockfile-remove $KNOWN_HOSTS" EXIT
+
+ # create a lockfile on known_hosts
+ lockfile-create "$KNOWN_HOSTS"
+
+ # note pre update file checksum
+ fileCheck="$(file_hash "$KNOWN_HOSTS")"
+
+ for host ; do
+ # process the host
+ process_host_known_hosts "$host"
+ # note the result
+ case "$?" in
+ 0)
+ nHostsOK=$((nHostsOK+1))
+ ;;
+ 2)
+ nHostsBAD=$((nHostsBAD+1))
+ ;;
+ esac
+
+ # touch the lockfile, for good measure.
+ lockfile-touch --oneshot "$KNOWN_HOSTS"
+ done
+
+ # remove the lockfile
+ lockfile-remove "$KNOWN_HOSTS"
+
+ # note if the known_hosts file was updated
+ if [ "$(file_hash "$KNOWN_HOSTS")" != "$fileCheck" ] ; then
+ log verbose "known_hosts file updated."
+ fi
+
+ # if an acceptable host was found, return 0
+ if [ "$nHostsOK" -gt 0 ] ; then
+ return 0
+ # else if no ok hosts were found...
+ else
+ # if no bad host were found then no hosts were found at all,
+ # and return 1
+ if [ "$nHostsBAD" -eq 0 ] ; then
+ return 1
+ # else if at least one bad host was found, return 2
+ else
+ return 2
+ fi
+ fi
+}
+
+# process hosts from a known_hosts file
+process_known_hosts() {
+ local hosts
+
+ log verbose "processing known_hosts file..."
+
+ hosts=$(meat "$KNOWN_HOSTS" | cut -d ' ' -f 1 | grep -v '^|.*$' | tr , ' ' | tr '\n' ' ')
+
+ if [ -z "$hosts" ] ; then
+ log error "no hosts to process."
+ return
+ fi
+
+ # take all the hosts from the known_hosts file (first
+ # field), grep out all the hashed hosts (lines starting
+ # with '|')...
+ update_known_hosts $hosts
}
-# process a uid in an authorized_keys file
+# process uids for the authorized_keys file
process_uid_authorized_keys() {
local userID
+ local nKeys
+ local nKeysOK
local ok
- local keyid
+ local sshKey
userID="$1"
- log "processing user ID: $userID"
+ log verbose "processing: $userID"
+
+ nKeys=0
+ nKeysOK=0
+
+ IFS=$'\n'
+ for line in $(process_user_id "$userID") ; do
+ # note that key was found
+ nKeys=$((nKeys+1))
+
+ ok=$(echo "$line" | cut -d: -f1)
+ sshKey=$(echo "$line" | cut -d: -f2)
+
+ if [ -z "$sshKey" ] ; then
+ continue
+ fi
- process_user_id "$userID" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
# remove the old host key line
remove_line "$AUTHORIZED_KEYS" "$sshKey"
+
# if key OK, add new host line
if [ "$ok" -eq '0' ] ; then
+ # note that key was found ok
+ nKeysOK=$((nKeysOK+1))
+
ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS"
fi
done
+
+ # if at least one key was found...
+ if [ "$nKeys" -gt 0 ] ; then
+ # if ok keys were found, return 0
+ if [ "$nKeysOK" -gt 0 ] ; then
+ return 0
+ # else return 2
+ else
+ return 2
+ fi
+ # if no keys were found, return 1
+ else
+ return 1
+ fi
}
-# process known_hosts file
-# go through line-by-line, extract each host, and process with the
-# host processing function
-process_known_hosts() {
- local hosts
- local host
+# update the authorized_keys files from a list of user IDs on command
+# line
+update_authorized_keys() {
+ local userID
+ local nIDs
+ local nIDsOK
+ local nIDsBAD
+ local fileCheck
- # take all the hosts from the known_hosts file (first field),
- # grep out all the hashed hosts (lines starting with '|')...
- cat "$KNOWN_HOSTS" | meat | \
- cut -d ' ' -f 1 | grep -v '^|.*$' | \
- while IFS=, read -r -a hosts ; do
- # and process each host
- for host in ${hosts[*]} ; do
- process_host_known_hosts "$host"
- done
- done
-}
+ # the number of ids specified on command line
+ nIDs="$#"
-# process an authorized_user_ids file for authorized_keys
-process_authorized_user_ids() {
- local userid
+ nIDsOK=0
+ nIDsBAD=0
- cat "$AUTHORIZED_USER_IDS" | meat | \
- while read -r userid ; do
- process_uid_authorized_keys "$userid"
- done
-}
+ # set the trap to remove any lockfiles on exit
+ trap "lockfile-remove $AUTHORIZED_KEYS" EXIT
-# EXPERIMENTAL (unused) process userids found in authorized_keys file
-# go through line-by-line, extract monkeysphere userids from comment
-# fields, and process each userid
-# NOT WORKING
-process_authorized_keys() {
- local authorizedKeys
- local userID
+ # create a lockfile on authorized_keys
+ lockfile-create "$AUTHORIZED_KEYS"
- authorizedKeys="$1"
-
- # take all the monkeysphere userids from the authorized_keys file
- # comment field (third field) that starts with "MonkeySphere uid:"
- # FIXME: needs to handle authorized_keys options (field 0)
- cat "$authorizedKeys" | meat | \
- while read -r options keytype key comment ; do
- # if the comment field is empty, assume the third field was
- # the comment
- if [ -z "$comment" ] ; then
- comment="$key"
- fi
+ # note pre update file checksum
+ fileCheck="$(file_hash "$AUTHORIZED_KEYS")"
- if echo "$comment" | egrep -v -q '^MonkeySphere[[:digit:]]{4}(-[[:digit:]]{2}){2}T[[:digit:]]{2}(:[[:digit:]]{2}){2}' ; then
- continue
- fi
- userID=$(echo "$comment" | awk "{ print $2 }")
- if [ -z "$userID" ] ; then
- continue
- fi
+ # remove any monkeysphere lines from authorized_keys file
+ remove_monkeysphere_lines "$AUTHORIZED_KEYS"
- # process the userid
- log "processing userid: '$userID'"
- process_user_id "$userID" > /dev/null
- done
-}
+ for userID ; do
+ # process the user ID, change return code if key not found for
+ # user ID
+ process_uid_authorized_keys "$userID"
-##################################################
-### GPG HELPER FUNCTIONS
+ # note the result
+ case "$?" in
+ 0)
+ nIDsOK=$((nIDsOK+1))
+ ;;
+ 2)
+ nIDsBAD=$((nIDsBAD+1))
+ ;;
+ esac
-# retrieve key from web of trust, and set owner trust to "full"
-# if key is found.
-trust_key() {
- # get the key from the key server
- if ! gpg --keyserver "$KEYSERVER" --recv-key "$keyID" ; then
- log "could not retrieve key '$keyID'"
- return 1
- fi
+ # touch the lockfile, for good measure.
+ lockfile-touch --oneshot "$AUTHORIZED_KEYS"
+ done
- # get key fingerprint
- fingerprint=$(get_key_fingerprint "$keyID")
+ # remove the lockfile
+ lockfile-remove "$AUTHORIZED_KEYS"
- # attach a "non-exportable" signature to the key
- # this is required for the key to have any validity at all
- # the 'y's on stdin indicates "yes, i really want to sign"
- echo -e 'y\ny' | gpg --lsign-key --command-fd 0 "$fingerprint"
+ # note if the authorized_keys file was updated
+ if [ "$(file_hash "$AUTHORIZED_KEYS")" != "$fileCheck" ] ; then
+ log verbose "authorized_keys file updated."
+ fi
- # import "full" trust for fingerprint into gpg
- echo ${fingerprint}:5: | gpg --import-ownertrust
- if [ $? = 0 ] ; then
- log "owner trust updated."
+ # if an acceptable id was found, return 0
+ if [ "$nIDsOK" -gt 0 ] ; then
+ return 0
+ # else if no ok ids were found...
else
- failure "there was a problem changing owner trust."
- fi
+ # if no bad ids were found then no ids were found at all, and
+ # return 1
+ if [ "$nIDsBAD" -eq 0 ] ; then
+ return 1
+ # else if at least one bad id was found, return 2
+ else
+ return 2
+ fi
+ fi
}
-# publish server key to keyserver
-publish_server_key() {
- read -p "really publish key to $KEYSERVER? [y|N]: " OK; OK=${OK:=N}
- if [ ${OK/y/Y} != 'Y' ] ; then
- failure "aborting."
+# process an authorized_user_ids file for authorized_keys
+process_authorized_user_ids() {
+ local line
+ local nline
+ local userIDs
+
+ authorizedUserIDs="$1"
+
+ log verbose "processing authorized_user_ids file..."
+
+ if ! meat "$authorizedUserIDs" > /dev/null ; then
+ log error "no user IDs to process."
+ return
fi
- # publish host key
- # FIXME: need to figure out better way to identify host key
- # dummy command so as not to publish fakes keys during testing
- # eventually:
- #gpg --send-keys --keyserver "$KEYSERVER" $(hostname -f)
- echo "NOT PUBLISHED: gpg --send-keys --keyserver $KEYSERVER $(hostname -f)"
+ nline=0
+
+ # extract user IDs from authorized_user_ids file
+ IFS=$'\n'
+ for line in $(meat "$authorizedUserIDs") ; do
+ userIDs["$nline"]="$line"
+ nline=$((nline+1))
+ done
+
+ update_authorized_keys "${userIDs[@]}"
}
projects / monkeysphere.git / blobdiff