# managed directories
ETC="/etc/monkeysphere"
export ETC
-CACHE="/var/cache/monkeysphere"
-export CACHE
-ERR=0
-export ERR
########################################################################
### UTILITY FUNCTIONS
-error() {
- log "$1"
- ERR=${2:-'1'}
-}
-
+# failure function. exits with code 255, unless specified otherwise.
failure() {
echo "$1" >&2
- exit ${2:-'1'}
+ exit ${2:-'255'}
}
# write output to stderr
# cut out all comments(#) and blank lines from standard input
meat() {
- grep -v -e "^[[:space:]]*#" -e '^$'
+ grep -v -e "^[[:space:]]*#" -e '^$' "$1"
}
# cut a specified line from standard input
cutline() {
- head --line="$1" | tail -1
+ head --line="$1" "$2" | tail -1
}
# check that characters are in a string (in an AND fashion).
file="$1"
string="$2"
- if [ "$file" -a "$string" ] ; then
- grep -v "$string" "$file" | sponge "$file"
+ if [ -z "$file" -o -z "$string" ] ; then
+ return 1
+ fi
+
+ # if the string is in the file...
+ if grep -q -F "$string" "$file" 2> /dev/null ; then
+ # remove the line with the string, and return 0
+ grep -v -F "$string" "$file" | sponge "$file"
+ return 0
+ # otherwise return 1
+ else
+ return 1
fi
}
echo "$path"
}
-### CONVERTION UTILITIES
+# test that a string to conforms to GPG's expiration format
+test_gpg_expire() {
+ echo "$1" | egrep -q "^[0-9]+[mwy]?$"
+}
+
+# check that a file is properly owned, and that all it's parent
+# directories are not group/other writable
+check_key_file_permissions() {
+ local user
+ local path
+ local access
+ local gAccess
+ local oAccess
+
+ # function to check that an octal corresponds to writability
+ is_write() {
+ [ "$1" -eq 2 -o "$1" -eq 3 -o "$1" -eq 6 -o "$1" -eq 7 ]
+ }
+
+ user="$1"
+ path="$2"
+
+ # return 0 is path does not exist
+ [ -e "$path" ] || return 0
+
+ owner=$(stat --format '%U' "$path")
+ access=$(stat --format '%a' "$path")
+ gAccess=$(echo "$access" | cut -c2)
+ oAccess=$(echo "$access" | cut -c3)
+
+ # check owner
+ if [ "$owner" != "$user" -a "$owner" != 'root' ] ; then
+ return 1
+ fi
+
+ # check group/other writability
+ if is_write "$gAccess" || is_write "$oAccess" ; then
+ return 2
+ fi
+
+ if [ "$path" = '/' ] ; then
+ return 0
+ else
+ check_key_file_permissions $(dirname "$path")
+ fi
+}
+
+### CONVERSION UTILITIES
# output the ssh key for a given key ID
gpg2ssh() {
local keyID
- #keyID="$1" #TMP
- # only use last 16 characters until openpgp2ssh can take all 40 #TMP
- keyID=$(echo "$1" | cut -c 25-) #TMP
+ keyID="$1"
gpg --export "$keyID" | openpgp2ssh "$keyID" 2> /dev/null
}
-# output the ssh key for a given secret key ID
-gpgsecret2ssh() {
- local keyID
-
- #keyID="$1" #TMP
- # only use last 16 characters until openpgp2ssh can take all 40 #TMP
- keyID=$(echo "$1" | cut -c 25-) #TMP
-
- gpg --export-secret-key "$keyID" | openpgp2ssh "$keyID" 2> /dev/null
-}
-
# output known_hosts line from ssh key
ssh2known_hosts() {
local host
# (not just first N (5 in this case))
gpg_fetch_userid() {
local userID
+ local returnCode
+
+ if [ "$CHECK_KEYSERVER" != 'true' ] ; then
+ return 0
+ fi
userID="$1"
gpg --quiet --batch --with-colons \
--command-fd 0 --keyserver "$KEYSERVER" \
--search ="$userID" > /dev/null 2>&1
+ returnCode="$?"
loge "done."
-}
-
-# get the full fingerprint of a key ID
-get_key_fingerprint() {
- local keyID
- keyID="$1"
+ # if the user is the monkeysphere user, then update the
+ # monkeysphere user's trustdb
+ if [ $(id -un) = "$MONKEYSPHERE_USER" ] ; then
+ gpg_authentication "--check-trustdb" > /dev/null 2>&1
+ fi
- gpg --list-key --with-colons --fixed-list-mode \
- --with-fingerprint --with-fingerprint "$keyID" | \
- grep '^fpr:' | grep "$keyID" | cut -d: -f10
+ return "$returnCode"
}
########################################################################
fi
requiredPubCapability=$(echo "$requiredCapability" | tr "[:lower:]" "[:upper:]")
- # if CHECK_KEYSERVER variable set, check the keyserver
- # for the user ID
- if [ "$CHECK_KEYSERVER" = "true" ] ; then
- gpg_fetch_userid "$userID"
- fi
+ # fetch the user ID if necessary/requested
+ gpg_fetch_userid "$userID"
# output gpg info for (exact) userid and store
gpgOut=$(gpg --list-key --fixed-list-mode --with-colon \
# if the gpg query return code is not 0, return 1
if [ "$?" -ne 0 ] ; then
- log " - key not found."
+ log " no primary keys found."
return 1
fi
# loop over all lines in the gpg output and process.
- # need to do it this way (as opposed to "while read...") so that
- # variables set in loop will be visible outside of loop
echo "$gpgOut" | cut -d: -f1,2,5,10,12 | \
while IFS=: read -r type validity keyid uidfpr usage ; do
# process based on record type
# output a line for the primary key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable key found."
- echo 0 "$fingerprint"
+ log " * acceptable primary key."
+ if [ -z "$sshKey" ] ; then
+ log " ! primary key could not be translated."
+ else
+ echo "0:${sshKey}"
+ fi
else
- echo 1 "$fingerprint"
+ log " - unacceptable primary key."
+ if [ -z "$sshKey" ] ; then
+ log " ! primary key could not be translated."
+ else
+ echo "1:${sshKey}"
+ fi
fi
;;
'sub') # sub keys
'fpr') # key fingerprint
fingerprint="$uidfpr"
+ sshKey=$(gpg2ssh "$fingerprint")
+
# if the last key was the pub key, skip
if [ "$lastKey" = pub ] ; then
continue
fi
-
- # output a line for the last subkey
+
+ # output a line for the primary key
# 0 = ok, 1 = bad
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
- log " * acceptable key found."
- echo 0 "$fingerprint"
+ log " * acceptable sub key."
+ if [ -z "$sshKey" ] ; then
+ log " ! sub key could not be translated."
+ else
+ echo "0:${sshKey}"
+ fi
else
- echo 1 "$fingerprint"
+ log " - unacceptable sub key."
+ if [ -z "$sshKey" ] ; then
+ log " ! sub key could not be translated."
+ else
+ echo "1:${sshKey}"
+ fi
fi
;;
esac
done
}
-# process hosts in the known_host file
-process_hosts_known_hosts() {
+# process a single host in the known_host file
+process_host_known_hosts() {
local host
local userID
+ local nKeys
+ local nKeysOK
local ok
- local keyid
+ local sshKey
local tmpfile
+ host="$1"
+
+ log "processing: $host"
+
+ userID="ssh://${host}"
+
+ nKeys=0
+ nKeysOK=0
+
+ IFS=$'\n'
+ for line in $(process_user_id "ssh://${host}") ; do
+ # note that key was found
+ nKeys=$((nKeys+1))
+
+ ok=$(echo "$line" | cut -d: -f1)
+ sshKey=$(echo "$line" | cut -d: -f2)
+
+ if [ -z "$sshKey" ] ; then
+ continue
+ fi
+
+ # remove the old host key line, and note if removed
+ remove_line "$KNOWN_HOSTS" "$sshKey"
+
+ # if key OK, add new host line
+ if [ "$ok" -eq '0' ] ; then
+ # note that key was found ok
+ nKeysOK=$((nKeysOK+1))
+
+ # hash if specified
+ if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then
+ # FIXME: this is really hackish cause ssh-keygen won't
+ # hash from stdin to stdout
+ tmpfile=$(mktemp)
+ ssh2known_hosts "$host" "$sshKey" > "$tmpfile"
+ ssh-keygen -H -f "$tmpfile" 2> /dev/null
+ cat "$tmpfile" >> "$KNOWN_HOSTS"
+ rm -f "$tmpfile" "${tmpfile}.old"
+ else
+ ssh2known_hosts "$host" "$sshKey" >> "$KNOWN_HOSTS"
+ fi
+ fi
+ done
+
+ # if at least one key was found...
+ if [ "$nKeys" -gt 0 ] ; then
+ # if ok keys were found, return 0
+ if [ "$nKeysOK" -gt 0 ] ; then
+ return 0
+ # else return 2
+ else
+ return 2
+ fi
+ # if no keys were found, return 1
+ else
+ return 1
+ fi
+}
+
+# update the known_hosts file for a set of hosts listed on command
+# line
+update_known_hosts() {
+ local nHosts
+ local nHostsOK
+ local nHostsBAD
+ local fileCheck
+ local host
+
+ # the number of hosts specified on command line
+ nHosts="$#"
+
+ nHostsOK=0
+ nHostsBAD=0
+
+ # set the trap to remove any lockfiles on exit
+ trap "lockfile-remove $KNOWN_HOSTS" EXIT
+
# create a lockfile on known_hosts
lockfile-create "$KNOWN_HOSTS"
+ # note pre update file checksum
+ fileCheck=$(md5sum "$KNOWN_HOSTS")
+
for host ; do
- log "processing host: $host"
-
- userID="ssh://${host}"
-
- process_user_id "ssh://${host}" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
- # remove the old host key line
- remove_line "$KNOWN_HOSTS" "$sshKey"
- # if key OK, add new host line
- if [ "$ok" -eq '0' ] ; then
- # hash if specified
- if [ "$HASH_KNOWN_HOSTS" = 'true' ] ; then
- # FIXME: this is really hackish cause ssh-keygen won't
- # hash from stdin to stdout
- tmpfile=$(mktemp)
- ssh2known_hosts "$host" "$sshKey" > "$tmpfile"
- ssh-keygen -H -f "$tmpfile" 2> /dev/null
- cat "$tmpfile" >> "$KNOWN_HOSTS"
- rm -f "$tmpfile" "${tmpfile}.old"
- else
- ssh2known_hosts "$host" "$sshKey" >> "$KNOWN_HOSTS"
- fi
- fi
- done
+ # process the host
+ process_host_known_hosts "$host"
+ # note the result
+ case "$?" in
+ 0)
+ nHostsOK=$((nHostsOK+1))
+ ;;
+ 2)
+ nHostsBAD=$((nHostsBAD+1))
+ ;;
+ esac
+
# touch the lockfile, for good measure.
lockfile-touch --oneshot "$KNOWN_HOSTS"
done
# remove the lockfile
lockfile-remove "$KNOWN_HOSTS"
+
+ # note if the known_hosts file was updated
+ if [ "$(md5sum "$KNOWN_HOSTS")" != "$fileCheck" ] ; then
+ log "known_hosts file updated."
+ fi
+
+ # if an acceptable host was found, return 0
+ if [ "$nHostsOK" -gt 0 ] ; then
+ return 0
+ # else if no ok hosts were found...
+ else
+ # if no bad host were found then no hosts were found at all,
+ # and return 1
+ if [ "$nHostsBAD" -eq 0 ] ; then
+ return 1
+ # else if at least one bad host was found, return 2
+ else
+ return 2
+ fi
+ fi
+}
+
+# process hosts from a known_hosts file
+process_known_hosts() {
+ local hosts
+
+ log "processing known_hosts file..."
+
+ hosts=$(meat "$KNOWN_HOSTS" | cut -d ' ' -f 1 | grep -v '^|.*$' | tr , ' ' | tr '\n' ' ')
+
+ if [ -z "$hosts" ] ; then
+ log "no hosts to process."
+ return
+ fi
+
+ # take all the hosts from the known_hosts file (first
+ # field), grep out all the hashed hosts (lines starting
+ # with '|')...
+ update_known_hosts $hosts
}
# process uids for the authorized_keys file
-process_uids_authorized_keys() {
+process_uid_authorized_keys() {
local userID
+ local nKeys
+ local nKeysOK
local ok
- local keyid
+ local sshKey
+
+ userID="$1"
+
+ log "processing: $userID"
+
+ nKeys=0
+ nKeysOK=0
+
+ IFS=$'\n'
+ for line in $(process_user_id "$userID") ; do
+ # note that key was found
+ nKeys=$((nKeys+1))
+
+ ok=$(echo "$line" | cut -d: -f1)
+ sshKey=$(echo "$line" | cut -d: -f2)
+
+ if [ -z "$sshKey" ] ; then
+ continue
+ fi
+
+ # remove the old host key line
+ remove_line "$AUTHORIZED_KEYS" "$sshKey"
+
+ # if key OK, add new host line
+ if [ "$ok" -eq '0' ] ; then
+ # note that key was found ok
+ nKeysOK=$((nKeysOK+1))
+
+ ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS"
+ fi
+ done
+
+ # if at least one key was found...
+ if [ "$nKeys" -gt 0 ] ; then
+ # if ok keys were found, return 0
+ if [ "$nKeysOK" -gt 0 ] ; then
+ return 0
+ # else return 2
+ else
+ return 2
+ fi
+ # if no keys were found, return 1
+ else
+ return 1
+ fi
+}
+
+# update the authorized_keys files from a list of user IDs on command
+# line
+update_authorized_keys() {
+ local userID
+ local nIDs
+ local nIDsOK
+ local nIDsBAD
+ local fileCheck
+
+ # the number of ids specified on command line
+ nIDs="$#"
+
+ nIDsOK=0
+ nIDsBAD=0
+
+ # set the trap to remove any lockfiles on exit
+ trap "lockfile-remove $AUTHORIZED_KEYS" EXIT
# create a lockfile on authorized_keys
lockfile-create "$AUTHORIZED_KEYS"
+ # note pre update file checksum
+ fileCheck=$(md5sum "$AUTHORIZED_KEYS")
+
for userID ; do
- log "processing user ID: $userID"
-
- process_user_id "$userID" | \
- while read -r ok keyid ; do
- sshKey=$(gpg2ssh "$keyid")
- # remove the old host key line
- remove_line "$AUTHORIZED_KEYS" "$sshKey"
- # if key OK, add new host line
- if [ "$ok" -eq '0' ] ; then
- ssh2authorized_keys "$userID" "$sshKey" >> "$AUTHORIZED_KEYS"
- fi
- done
+ # process the user ID, change return code if key not found for
+ # user ID
+ process_uid_authorized_keys "$userID"
+
+ # note the result
+ case "$?" in
+ 0)
+ nIDsOK=$((nIDsOK+1))
+ ;;
+ 2)
+ nIDsBAD=$((nIDsBAD+1))
+ ;;
+ esac
+
# touch the lockfile, for good measure.
lockfile-touch --oneshot "$AUTHORIZED_KEYS"
done
# remove the lockfile
lockfile-remove "$AUTHORIZED_KEYS"
-}
-# process known_hosts file
-# go through line-by-line, extract each host, and process with the
-# host processing function
-process_known_hosts() {
- local hosts
- local host
+ # note if the authorized_keys file was updated
+ if [ "$(md5sum "$AUTHORIZED_KEYS")" != "$fileCheck" ] ; then
+ log "authorized_keys file updated."
+ fi
- # take all the hosts from the known_hosts file (first field),
- # grep out all the hashed hosts (lines starting with '|')...
- cat "$KNOWN_HOSTS" | meat | \
- cut -d ' ' -f 1 | grep -v '^|.*$' | \
- while IFS=, read -r -a hosts ; do
- process_hosts_known_hosts ${hosts[@]}
- done
+ # if an acceptable id was found, return 0
+ if [ "$nIDsOK" -gt 0 ] ; then
+ return 0
+ # else if no ok ids were found...
+ else
+ # if no bad ids were found then no ids were found at all, and
+ # return 1
+ if [ "$nIDsBAD" -eq 0 ] ; then
+ return 1
+ # else if at least one bad id was found, return 2
+ else
+ return 2
+ fi
+ fi
}
# process an authorized_user_ids file for authorized_keys
process_authorized_user_ids() {
- local userid
+ local line
+ local nline
+ local userIDs
authorizedUserIDs="$1"
- cat "$authorizedUserIDs" | meat | \
- while read -r userid ; do
- process_uids_authorized_keys "$userid"
+ log "processing authorized_user_ids file..."
+
+ if ! meat "$authorizedUserIDs" > /dev/null ; then
+ log "no user IDs to process."
+ return
+ fi
+
+ nline=0
+
+ # extract user IDs from authorized_user_ids file
+ IFS=$'\n'
+ for line in $(meat "$authorizedUserIDs") ; do
+ userIDs["$nline"]="$line"
+ nline=$((nline+1))
done
+
+ update_authorized_keys "${userIDs[@]}"
}
# EXPERIMENTAL (unused) process userids found in authorized_keys file
process_authorized_keys() {
local authorizedKeys
local userID
+ local returnCode
+
+ # default return code is 0, and is set to 1 if a key for a user
+ # is not found
+ returnCode=0
authorizedKeys="$1"
# take all the monkeysphere userids from the authorized_keys file
# comment field (third field) that starts with "MonkeySphere uid:"
# FIXME: needs to handle authorized_keys options (field 0)
- cat "$authorizedKeys" | meat | \
+ meat "$authorizedKeys" | \
while read -r options keytype key comment ; do
# if the comment field is empty, assume the third field was
# the comment
# process the userid
log "processing userid: '$userID'"
- process_user_id "$userID" > /dev/null
+ process_user_id "$userID" > /dev/null || returnCode=1
done
-}
-
-##################################################
-### GPG HELPER FUNCTIONS
-
-# retrieve key from web of trust, and set owner trust to "full"
-# if key is found.
-trust_key() {
- # get the key from the key server
- if ! gpg --keyserver "$KEYSERVER" --recv-key "$keyID" ; then
- failure "Could not retrieve key '$keyID'."
- fi
-
- # get key fingerprint
- fingerprint=$(get_key_fingerprint "$keyID")
-
- # attach a "non-exportable" signature to the key
- # this is required for the key to have any validity at all
- # the 'y's on stdin indicates "yes, i really want to sign"
- echo -e 'y\ny' | gpg --lsign-key --command-fd 0 "$fingerprint"
-
- # import "full" trust for fingerprint into gpg
- echo ${fingerprint}:5: | gpg --import-ownertrust
- if [ $? = 0 ] ; then
- log "Owner trust updated."
- else
- failure "There was a problem changing owner trust."
- fi
-}
-
-# publish server key to keyserver
-publish_server_key() {
- read -p "really publish key to $KEYSERVER? [y|N]: " OK; OK=${OK:=N}
- if [ ${OK/y/Y} != 'Y' ] ; then
- failure "aborting."
- fi
- # publish host key
- # FIXME: need to figure out better way to identify host key
- # dummy command so as not to publish fakes keys during testing
- # eventually:
- #gpg --keyserver "$KEYSERVER" --send-keys $(hostname -f)
- failure "NOT PUBLISHED (to avoid permanent publication errors during monkeysphere development).
-To publish manually, do: gpg --keyserver $KEYSERVER --send-keys $(hostname -f)"
+ return "$returnCode"
}
projects / monkeysphere.git / blobdiff