# all-caps variables are meant to be user supplied (ie. from config
# file) and are considered global
-########################################################################
-### COMMON VARIABLES
-
-# managed directories
-SYSCONFIGDIR=${MONKEYSPHERE_SYSCONFIGDIR:-"/etc/monkeysphere"}
-export SYSCONFIGDIR
-
-# monkeysphere version
-VERSION=0.23~pre
-
-# default log level
-LOG_LEVEL="INFO"
-
-# default keyserver
-KEYSERVER="pool.sks-keyservers.net"
-
-# whether or not to check keyservers by defaul
-CHECK_KEYSERVER="true"
-
-# default monkeysphere user
-MONKEYSPHERE_USER="monkeysphere"
-
-# default about whether or not to prompt
-PROMPT="true"
-
########################################################################
### UTILITY FUNCTIONS
+# output version info
+version() {
+ cat "${SYSSHAREDIR}/VERSION"
+}
+
# failure function. exits with code 255, unless specified otherwise.
failure() {
[ "$1" ] && echo "$1" >&2
fi
if [ "$priority" = "$level" -a "$output" = 'true' ] ; then
if [ "$1" ] ; then
- echo -n "ms: " >&2
- echo "$@" >&2
+ echo "$@"
else
- cat >&2
- fi
+ cat
+ fi | sed 's/^/'"${LOG_PREFIX}"'/' >&2
fi
done
}
head --line="$1" "$2" | tail -1
}
-# make a temporary directly
+# make a temporary directory
msmktempdir() {
- mktemp -d ${TMPDIR:-/tmp}/tmp.XXXXXXXXXX
+ mktemp -d ${TMPDIR:-/tmp}/monkeysphere.XXXXXXXXXX
+}
+
+# make a temporary file
+msmktempfile() {
+ mktemp ${TMPDIR:-/tmp}/monkeysphere.XXXXXXXXXX
}
# this is a wrapper for doing lock functions.
fi
}
-test_gnu_dummy_s2k_extension() {
-
-# this block contains a demonstration private key that has had the
-# primary key stripped out using the GNU S2K extension known as
-# "gnu-dummy" (see /usr/share/doc/gnupg/DETAILS.gz). The subkey is
-# present in cleartext, however.
-
-# openpgp2ssh will be able to deal with this based on whether the
-# local copy of GnuTLS contains read_s2k support that can handle it.
-
-# read up on that here:
-
-# http://lists.gnu.org/archive/html/gnutls-devel/2008-08/msg00005.html
-
-echo "
------BEGIN PGP PRIVATE KEY BLOCK-----
-Version: GnuPG v1.4.9 (GNU/Linux)
-
-lQCVBEO3YdABBACRqqEnucag4+vyZny2M67Pai5+5suIRRvY+Ly8Ms5MvgCi3EVV
-xT05O/+0ShiRaf+QicCOFrhbU9PZzzU+seEvkeW2UCu4dQfILkmj+HBEIltGnHr3
-G0yegHj5pnqrcezERURf2e17gGFWX91cXB9Cm721FPXczuKraphKwCA9PwARAQAB
-/gNlAkdOVQG0OURlbW9uc3RyYXRpb24gS2V5IGZvciBTMksgR05VIGV4dGVuc2lv
-biAxMDAxIC0tIGdudS1kdW1teYi8BBMBAgAmBQJDt2HQAhsDBQkB4TOABgsJCAcD
-AgQVAggDBBYCAwECHgECF4AACgkQQZUwSa4UDezTOQP/TMQXUVrWzHYZGopoPZ2+
-ZS3qddiznBHsgb7MGYg1KlTiVJSroDUBCHIUJvdQKZV9zrzrFl47D07x6hGyUPHV
-aZXvuITW8t1o5MMHkCy3pmJ2KgfDvdUxrBvLfgPMICA4c6zA0mWquee43syEW9NY
-g3q61iPlQwD1J1kX1wlimLCdAdgEQ7dh0AEEANAwa63zlQbuy1Meliy8otwiOa+a
-mH6pxxUgUNggjyjO5qx+rl25mMjvGIRX4/L1QwIBXJBVi3SgvJW1COZxZqBYqj9U
-8HVT07mWKFEDf0rZLeUE2jTm16cF9fcW4DQhW+sfYm+hi2sY3HeMuwlUBK9KHfW2
-+bGeDzVZ4pqfUEudABEBAAEAA/0bemib+wxub9IyVFUp7nPobjQC83qxLSNzrGI/
-RHzgu/5CQi4tfLOnwbcQsLELfker2hYnjsLrT9PURqK4F7udrWEoZ1I1LymOtLG/
-4tNZ7Mnul3wRC2tCn7FKx8sGJwGh/3li8vZ6ALVJAyOia5TZ/buX0+QZzt6+hPKk
-7MU1WQIA4bUBjtrsqDwro94DvPj3/jBnMZbXr6WZIItLNeVDUcM8oHL807Am97K1
-ueO/f6v1sGAHG6lVPTmtekqPSTWBfwIA7CGFvEyvSALfB8NUa6jtk27NCiw0csql
-kuhCmwXGMVOiryKEfegkIahf2bAd/gnWHPrpWp7bUE20v8YoW22I4wIAhnm5Wr5Q
-Sy7EHDUxmJm5TzadFp9gq08qNzHBpXSYXXJ3JuWcL1/awUqp3tE1I6zZ0hZ38Ia6
-SdBMN88idnhDPqPoiKUEGAECAA8FAkO3YdACGyAFCQHhM4AACgkQQZUwSa4UDezm
-vQP/ZhK+2ly9oI2z7ZcNC/BJRch0/ybQ3haahII8pXXmOThpZohr/LUgoWgCZdXg
-vP6yiszNk2tIs8KphCAw7Lw/qzDC2hEORjWO4f46qk73RAgSqG/GyzI4ltWiDhqn
-vnQCFl3+QFSe4zinqykHnLwGPMXv428d/ZjkIc2ju8dRsn4=
-=CR5w
------END PGP PRIVATE KEY BLOCK-----
-" | openpgp2ssh 4129E89D17C1D591 >/dev/null 2>/dev/null
-
-}
-
# remove all lines with specified string from specified file
remove_line() {
local file
file="$1"
- if [ -z "$file" ] ; then
+ # return error if file does not exist
+ if [ ! -e "$file" ] ; then
return 1
fi
- if [ ! -e "$file" ] ; then
- return 1
+ # just return ok if the file is empty, since there aren't any
+ # lines to remove
+ if [ ! -s "$file" ] ; then
+ return 0
fi
tempfile=$(mktemp "${file}.XXXXXXX") || \
# return 1 if path has invalid owner
if [ "$owner" != "$uname" -a "$owner" != 'root' ] ; then
- log error "improper ownership on path '$path'."
+ log error "improper ownership on path '$path':"
+ log error " $owner != ($uname|root)"
return 1
fi
# return 2 if path has group or other writability
if is_write "$gAccess" || is_write "$oAccess" ; then
- log error "improper group or other writability on path '$path'."
+ log error "improper group or other writability on path '$path':"
+ log error " group: $gAccess, other: $oAcess"
return 2
fi
# return zero if all clear, or go to next path
if [ "$path" = '/' ] ; then
+ log debug "path ok."
return 0
else
check_key_file_permissions "$uname" $(dirname "$path")
# FIXME: need to figure out how to retrieve all matching keys
# (not just first N (5 in this case))
gpg_fetch_userid() {
+ local returnCode=0
local userID
- local returnCode
if [ "$CHECK_KEYSERVER" != 'true' ] ; then
return 0
#
# expects global variable: "MODE"
process_user_id() {
+ local returnCode=0
local userID
local requiredCapability
local requiredPubCapability
# output gpg info for (exact) userid and store
gpgOut=$(gpg --list-key --fixed-list-mode --with-colon \
--with-fingerprint --with-fingerprint \
- ="$userID" 2>/dev/null)
+ ="$userID" 2>/dev/null) || returnCode="$?"
# if the gpg query return code is not 0, return 1
- if [ "$?" -ne 0 ] ; then
+ if [ "$returnCode" -ne 0 ] ; then
log verbose " no primary keys found."
return 1
fi
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
log verbose " * acceptable primary key."
if [ -z "$sshKey" ] ; then
- log error " ! primary key could not be translated (not RSA or DSA?)."
+ log error " ! primary key could not be translated (not RSA?)."
else
echo "0:${sshKey}"
fi
else
log debug " - unacceptable primary key."
if [ -z "$sshKey" ] ; then
- log debug " ! primary key could not be translated (not RSA or DSA?)."
+ log debug " ! primary key could not be translated (not RSA?)."
else
echo "1:${sshKey}"
fi
if [ "$keyOK" -a "$uidOK" -a "$lastKeyOK" ] ; then
log verbose " * acceptable sub key."
if [ -z "$sshKey" ] ; then
- log error " ! sub key could not be translated (not RSA or DSA?)."
+ log error " ! sub key could not be translated (not RSA?)."
else
echo "0:${sshKey}"
fi
else
log debug " - unacceptable sub key."
if [ -z "$sshKey" ] ; then
- log debug " ! sub key could not be translated (not RSA or DSA?)."
+ log debug " ! sub key could not be translated (not RSA?)."
else
echo "1:${sshKey}"
fi
# update the known_hosts file for a set of hosts listed on command
# line
update_known_hosts() {
+ local returnCode=0
local nHosts
local nHostsOK
local nHostsBAD
(umask 0022 && touch "$KNOWN_HOSTS")
# check permissions on the known_hosts file path
- check_key_file_permissions "$USER" "$KNOWN_HOSTS" || failure
+ check_key_file_permissions $(whoami) "$KNOWN_HOSTS" || failure
# create a lockfile on known_hosts:
lock create "$KNOWN_HOSTS"
for host ; do
# process the host
- process_host_known_hosts "$host"
+ process_host_known_hosts "$host" || returnCode="$?"
# note the result
- case "$?" in
+ case "$returnCode" in
0)
nHostsOK=$((nHostsOK+1))
;;
failure "known_hosts file '$KNOWN_HOSTS' does not exist."
fi
- log debug "processing known_hosts file..."
+ log debug "processing known_hosts file:"
+ log debug " $KNOWN_HOSTS"
hosts=$(meat "$KNOWN_HOSTS" | cut -d ' ' -f 1 | grep -v '^|.*$' | tr , ' ' | tr '\n' ' ')
# update the authorized_keys files from a list of user IDs on command
# line
update_authorized_keys() {
+ local returnCode=0
local userID
local nIDs
local nIDsOK
nIDsOK=0
nIDsBAD=0
+ log debug "updating authorized_keys file:"
+ log debug " $AUTHORIZED_KEYS"
+
# check permissions on the authorized_keys file path
- check_key_file_permissions "$USER" "$AUTHORIZED_KEYS" || failure
+ check_key_file_permissions $(whoami) "$AUTHORIZED_KEYS" || failure
# create a lockfile on authorized_keys
lock create "$AUTHORIZED_KEYS"
for userID ; do
# process the user ID, change return code if key not found for
# user ID
- process_uid_authorized_keys "$userID"
+ process_uid_authorized_keys "$userID" || returnCode="$?"
# note the result
- case "$?" in
+ case "$returnCode" in
0)
nIDsOK=$((nIDsOK+1))
;;
failure "authorized_user_ids file '$authorizedUserIDs' does not exist."
fi
- # check permissions on the authorized_user_ids file path
- check_key_file_permissions "$USER" "$authorizedUserIDs" || failure
+ log debug "processing authorized_user_ids file:"
+ log debug " $authorizedUserIDs"
- log debug "processing authorized_user_ids file..."
+ # check permissions on the authorized_user_ids file path
+ check_key_file_permissions $(whoami) "$authorizedUserIDs" || failure
if ! meat "$authorizedUserIDs" > /dev/null ; then
log debug " no user IDs to process."
# takes a gpg key or keys on stdin, and outputs a list of
# fingerprints, one per line:
list_primary_fingerprints() {
- local file="$1"
local fake=$(msmktempdir)
GNUPGHOME="$fake" gpg --no-tty --quiet --import
GNUPGHOME="$fake" gpg --with-colons --fingerprint --list-keys | \
awk -F: '/^fpr:/{ print $10 }'
rm -rf "$fake"
}
+
+
+check_cruft_file() {
+ local loc="$1"
+ local version="$2"
+
+ if [ -e "$loc" ] ; then
+ printf "! The file '%s' is no longer used by\n monkeysphere (as of version %s), and can be removed.\n\n" "$loc" "$version" | log info
+ fi
+}
+
+check_upgrade_dir() {
+ local loc="$1"
+ local version="$2"
+
+ if [ -d "$loc" ] ; then
+ printf "The presence of directory '%s' indicates that you have\nnot yet completed a monkeysphere upgrade.\nYou should probably run the following script:\n %s/transitions/%s\n\n" "$loc" "$SYSSHAREDIR" "$version" | log info
+ fi
+}
+
+## look for cruft from old versions of the monkeysphere, and notice if
+## upgrades have not been run:
+report_cruft() {
+ check_upgrade_dir "${SYSCONFIGDIR}/gnupg-host" 0.23
+ check_upgrade_dir "${SYSCONFIGDIR}/gnupg-authentication" 0.23
+
+ check_cruft_file "${SYSCONFIGDIR}/gnupg-authentication.conf" 0.23
+ check_cruft_file "${SYSCONFIGDIR}/gnupg-host.conf" 0.23
+
+ local found=
+ for foo in "${SYSDATADIR}/backup-from-"*"-transition" ; do
+ if [ -d "$foo" ] ; then
+ printf "! %s\n" "$foo" | log info
+ found=true
+ fi
+ done
+ if [ "$found" ] ; then
+ printf "The directories above are backups left over from a monkeysphere transition.\nThey may contain copies of sensitive data (host keys, certifier lists), but\nthey are no longer needed by monkeysphere.\nYou may remove them at any time.\n\n" | log info
+ fi
+}