updated test suite to use scheme://hostname instead of raw hostname, in preparation...

[monkeysphere.git] / tests / basic

diff --git a/tests/basic b/tests/basic
index 6eb0b2777eb1ee2268a33430c861147f6d9a2e94..ae30529a47735dad966e7d654467ca0f2679f468 100755 (executable)
--- a/tests/basic
+++ b/tests/basic
@@ -10,7 +10,7 @@
 #   Jameson Rollins <jrollins@fifthhorseman.net>
 #   Micah Anderson <micah@riseup.net> 
 #
-# Copyright: 2008-2009
+# Copyright: © 2008-2010
 # License: GPL v3 or later
 
 # these tests should all be able to run as a non-privileged user.
@@ -47,7 +47,7 @@ On debian-derived systems, you can set this up with:
 
 # gpg command for test admin user
 gpgadmin() {
-    chmod 0700 "$TEMPDIR"/admin
+    chmod 0700 "$TEMPDIR"/admin "$TEMPDIR"/admin/.gnupg
     GNUPGHOME="$TEMPDIR"/admin/.gnupg gpg --no-tty "$@"
 }
 
@@ -90,6 +90,17 @@ ssh_test() {
     fi
 }
 
+# invoke this instead of ssh_test() if you want this test to be
+# skipped when the working directory has bad permissions.
+ssh_good_perm_test() {
+    if [ "$TEMPDIR_PERMISSIONS_SAFE" = no ] ; then
+       echo "WARNING!!! Test SKIPPED because we are running in an unsafe working directory."
+    else
+       ssh_test "$@"
+    fi
+}
+
+
 SSHD_PID=
 
 ## setup trap
@@ -148,7 +159,7 @@ export DISPLAY=monkeys
 
 ## we cannot do proper directory permissions checking if the current
 ## working directory has unsatisfactory permissions:
-if ( . "$MONKEYSPHERE_SYSSHAREDIR"/common && check_key_file_permissions $(whoami) "$TEMPDIR" ) ; then 
+if "$MONKEYSPHERE_SYSSHAREDIR"/checkperms $(whoami) "$TEMPDIR"; then 
     echo "Permissions on temporary directory '$TEMPDIR' are OK for permissions checks."
     TEMPDIR_PERMISSIONS_SAFE=yes
 else
@@ -168,9 +179,15 @@ else
 
 EOF
 
-    # FIXME: what should we do with this knowledge to make sure that
-    # the appropriate tests are handled properly?
+    # FIXME: what else should we do with this knowledge to make sure
+    # that the appropriate tests are handled properly?
     TEMPDIR_PERMISSIONS_SAFE=no
+
+    # this is a new option (as of 0.26) to disable filesystem
+    # permission checks.
+
+    # it should operate by analogy with StrictModes from sshd_config(5)
+    export MONKEYSPHERE_STRICT_MODES=false
 fi
 
 
@@ -233,7 +250,7 @@ echo
 echo "##################################################"
 echo "### import host key..."
 ssh-keygen -b 1024 -t rsa -N '' -f "$TEMPDIR"/ssh_host_rsa_key
-monkeysphere-host import-key "$TEMPDIR"/ssh_host_rsa_key testhost
+monkeysphere-host import-key "$TEMPDIR"/ssh_host_rsa_key ssh://testhost
 
 echo
 echo "##################################################"
@@ -323,6 +340,12 @@ monkeysphere-authentication update-users $(whoami)
 ######################################################################
 ### TESTS
 
+## see whether keys-for-userid works from the client's perspective:
+echo
+echo "##################################################"
+echo "### testing monkeysphere keys-for-userid ..."
+diff -q <( monkeysphere keys-for-userid ssh://testhost ) <( cut -f1,2 -d' ' < "$TEMPDIR"/ssh_host_rsa_key.pub )
+
 # connect to test sshd, using monkeysphere ssh-proxycommand to verify
 # the identity before connection.  This should work in both directions!
 echo
@@ -353,7 +376,7 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod g-w "$TESTHOME"/.monkeysphere/authorized_user_ids
 echo
 echo "##################################################"
@@ -363,7 +386,7 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod o-w "$TESTHOME"/.monkeysphere/authorized_user_ids
 monkeysphere-authentication update-users $(whoami)
 
@@ -391,7 +414,7 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod o-w "$TESTHOME"/.monkeysphere.linktest
 echo
 echo "##################################################"
@@ -410,7 +433,7 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod o-w "$TESTHOME"/.monkeysphere.linktest
 # FIXME: implement check of link path, and uncomment this test
 # echo
@@ -421,7 +444,7 @@ chmod o-w "$TESTHOME"/.monkeysphere.linktest
 # echo
 # echo "##################################################"
 # echo "### ssh connection test for failure..."
-# ssh_test 255
+# ssh_good_perm_test 255
 # chmod o-w "$TESTHOME"/.monkeysphere
 rm "$TESTHOME"/.monkeysphere/authorized_user_ids
 mv "$TESTHOME"/.monkeysphere/authorized_user_ids{.bak,}
@@ -444,12 +467,12 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod o-w "$TESTHOME"/.monkeysphere.linktest
 echo
 echo "##################################################"
 echo "### make .monkeysphere directory a relative symlink and updating..."
-ln -sfn .monkeysphere{.linktest,}
+ln -sfn .monkeysphere.linktest "$TESTHOME"/.monkeysphere
 monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
@@ -463,7 +486,7 @@ monkeysphere-authentication update-users $(whoami)
 echo
 echo "##################################################"
 echo "### ssh connection test for failure..."
-ssh_test 255
+ssh_good_perm_test 255
 chmod o-w "$TESTHOME"/.monkeysphere.linktest
 rm "$TESTHOME"/.monkeysphere
 mv "$TESTHOME"/.monkeysphere{.bak,}
@@ -483,7 +506,7 @@ target_hostname=testhost2 ssh_test 255
 echo
 echo "##################################################"
 echo "### add hostname, certify by admin, import by user..."
-monkeysphere-host add-hostname testhost2
+monkeysphere-host add-hostname ssh://testhost2
 < "$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg gpgadmin --import
 printf "y\ny\n" | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID"
 
@@ -504,7 +527,7 @@ target_hostname=testhost2 ssh_test
 echo
 echo "##################################################"
 echo "### ssh connection test for failure with 'testhost2' revoked..."
-monkeysphere-host revoke-hostname testhost2
+monkeysphere-host revoke-hostname ssh://testhost2
 gpg --import <"$MONKEYSPHERE_SYSCONFIGDIR"/ssh_host_rsa_key.pub.gpg
 gpg --check-trustdb
 target_hostname=testhost2 ssh_test 255