# NOTE: these tests have *not* themselves been tested yet
# (2008-09-13). Please exercise with caution!
-# these tests assume a commonly-trusted "Admin's key", a fake key
-# permanently stored in ./admin:
+# fail on fail
+set -e
+# gpg command for test admin user
gpgadmin() {
- GNUPGHOME=./admin gpg "$@"
+ GNUPGHOME="$TEMPDIR"/admin/.gnupg gpg "$@"
}
-
# cleanup:
-
cleanup() {
- rm -f ./ssh-socket
- # FIXME: how should we clear out the temporary $VARLIB?
+ echo
+ read -p "press enter to cleanup and remove tmp:"
+
+ echo "### stop sshd..."
+ kill %1
- # FIXME: clear out ssh client config file and known hosts.
+ echo "### removing temp dir..."
+ rm -rf "$TEMPDIR"
+
+ wait
}
+## setup trap
+trap cleanup EXIT
+
## set up some variables to ensure that we're operating strictly in
## the tests, not system-wide:
-# FIXME: can we override $VARLIB ?
-# FIXME: can we override $ETC ?
+export TESTDIR=$(pwd)
+
+# make temp dir
+TEMPDIR="$TESTDIR"/tmp
+if [ -e "$TEMPDIR" ] ; then
+ echo "tempdir '$TEMPDIR' already exists."
+ exit 1
+fi
+mkdir "$TEMPDIR"
# Use the local copy of executables first, instead of system ones.
# This should help us test without installing.
-export PATH=$(pwd)/../src:$(pwd)/../src/keytrans:$PATH
-export MONKEYSPHERE_SHARE=$(pwd)/../src
-
-# create a new host key, certify it with the "Admin's Key".
-
-echo | monkeysphere-server gen-key --expire 2d
-
-HOSTKEYID=$( monkeysphere-server show-key | tail -n1 | cut -f3 -d\ )
-
-monkeysphere-server gpg-authentication-cmd "--armor --export $HOSTKEYID" | gpgadmin --import
+export PATH="$TESTDIR"/../src:"$TESTDIR"/../src/keytrans:"$PATH"
-gpgadmin --sign-key "$HOSTKEYID"
+export MONKEYSPHERE_SYSDATADIR="$TEMPDIR"
+export MONKEYSPHERE_SYSCONFIGDIR="$TEMPDIR"
+export MONKEYSPHERE_SYSSHAREDIR="$TESTDIR"/../src
+export MONKEYSPHERE_MONKEYSPHERE_USER="$USER"
+export MONKEYSPHERE_CHECK_KEYSERVER=false
-# FIXME: how can we test publish-key without flooding junk into the
-# keyservers?
+SSHD_CONFIG="$TEMPDIR"/sshd_config
+export SOCKET="$TEMPDIR"/ssh-socket
-# indicate that the "Admin's" key is an identity certifier for the
-# host
+# copy in admin and testuser home to tmp
+echo "### copying admin and testuser homes..."
+cp -a "$TESTDIR"/home/admin "$TEMPDIR"/
+cp -a "$TESTDIR"/home/testuser "$TEMPDIR"/
-monkeysphere-server add-identity-certifier ./admin/pubkey.gpg
+cat <<EOF > "$TEMPDIR"/testuser/.ssh/config
+UserKnownHostsFile $TEMPDIR/testuser/.ssh/known_hosts
+EOF
-# launch sshd with the new host key.
+cat <<EOF > "$TEMPDIR"/testuser/.monkeysphere/monkeysphere.conf
+KNOWN_HOSTS=$TEMPDIR/testuser/.ssh/known_hosts
+EOF
-mkfifo ./ssh-socket
-sshd -f ./sshd_config -i <>./ssh-socket
+### SERVER TESTS
-# connect to sample sshd host key, using monkeysphere to verify the
-# identity before connection.
+# setup monkeysphere temp gnupghome directories
+mkdir -p -m 750 "$MONKEYSPHERE_SYSDATADIR"/gnupg-host
+mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication
+cat <<EOF > "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication/gpg.conf
+primary-keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-authentication/pubring.gpg
+keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-host/pubring.gpg
+EOF
-## FIXME: implement!
+# create a new host key
+echo "### generating server key..."
+# add gpg.conf with quick-random
+echo "quick-random" >> "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
+echo | monkeysphere-server gen-key --length 1024 --expire 0 testhost
+# remove the gpg.conf
+rm "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
-# create a new client side key, certify it with the "CA", use it to
-# log in.
+HOSTKEYID=$( monkeysphere-server show-key | tail -n1 | cut -f3 -d\ )
-## FIXME: implement!
+# certify it with the "Admin's Key".
+# (this would normally be done via keyservers)
+echo "### certifying server key..."
+monkeysphere-server gpg-authentication-cmd "--armor --export $HOSTKEYID" | gpgadmin --import
+echo y | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID"
+# FIXME: how can we test publish-key without flooding junk into the
+# keyservers?
+# add admin as identity certifier for testhost
+echo "### adding admin as certifier..."
+echo y | monkeysphere-server add-identity-certifier "$TEMPDIR"/admin/.gnupg/pubkey.gpg
+
+# initialize base sshd_config
+cp etc/ssh/sshd_config "$SSHD_CONFIG"
+# write the sshd_config
+cat <<EOF >> "$SSHD_CONFIG"
+HostKey ${MONKEYSPHERE_SYSDATADIR}/ssh_host_rsa_key
+AuthorizedKeysFile ${MONKEYSPHERE_SYSDATADIR}/authorized_keys/%u
+EOF
+
+# launch test sshd with the new host key.
+echo "### starting sshd..."
+socat EXEC:"/usr/sbin/sshd -f ${SSHD_CONFIG} -i -d -d -d -D -e" "UNIX-LISTEN:${SOCKET}" 2> "$TEMPDIR"/sshd.log &
+
+### TESTUSER TESTS
+
+# generate an auth subkey for the test user
+echo "### generating key for testuser..."
+MONKEYSPHERE_GNUPGHOME="$TEMPDIR"/testuser/.gnupg \
+SSH_ASKPASS=echo \
+ monkeysphere gen-subkey --expire 0
+
+# add server key to testuser keychain
+echo "### export server key to testuser..."
+gpgadmin --armor --export "$HOSTKEYID" | \
+ GNUPGHOME="$TEMPDIR"/testuser/.gnupg gpg --import
+
+# connect to test sshd, using monkeysphere-ssh-proxycommand to verify
+# the identity before connection. This should work in both directions!
+echo "### testuser connecting to sshd socket..."
+PROXY_COMMAND="monkeysphere-ssh-proxycommand --no-connect %h && socat STDIO UNIX:${SOCKET}"
+GNUPGHOME="$TEMPDIR"/testuser/.gnupg \
+MONKEYSPHERE_HOME="$TEMPDIR"/testuser/.monkeysphere \
+ ssh -F "$TEMPDIR"/testuser/.ssh/config -v -v -v -oProxyCommand="$PROXY_COMMAND" testhost
projects / monkeysphere.git / blobdiff