*/
#define CONFIG_ADC_STROBE 0
+
+/**
+ * Start up timer[s] = startup value / ADCClock [Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_sut"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_SUT ADC_SUT512
+
+/**
+ * Analog Settling Time[s] = settling value / ADCClock[Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_stt"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_STTLING ADC_AST17
+
+/**
+ * Tracking Time[s] = (TRACKTIM + 1) / ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRACKTIM 0
+
+/**
+ * Transfer Period[s] = (TRANSFER * 2 + 3) ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRANSFER 1
+
#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DAC module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DAC_H
+#define CFG_DAC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DAC_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DAC_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * DAC Refresh Period = 1024*REFRESH/DACC Clock
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 65536
+ */
+#define CONFIG_DAC_REFRESH 16
+
+/**
+ * DAC Startup Time Selection.
+ * see datasheet table.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 63
+ */
+#define CONFIG_DAC_STARTUP 0
+
+/**
+ * DAC Trigger Selection.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3x_dac_tc"
+ * $WIZ$ supports = "sam3x"
+ */
+#define CONFIG_DAC_TIMER DACC_TRGSEL_TIO_CH0
+
+#endif /* CFG_DAC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
--- /dev/null
+/**
+ * \file cfg_led_7seg.h
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for led 7 segment display.
+ *
+ * \author Fabio Bizzi <fbizzi@bizzi.org>
+ *
+ * \addtogroup SevenSegDisplay 7 Segments LED Displays Driver
+ * \{
+ *
+ */
+
+#ifndef CFG_LED_7SEG_H
+#define CFG_LED_7SEG_H
+
+/**
+ * Use a Common Cathode display.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LED_7SEG_CCAT 0
+
+/**
+ * Number of digit present in the LED display.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ * $WIZ$ max = 8
+ */
+#define CONFIG_LED_7SEG_DIGIT 4
+
+/**
+ * Max lenght of the string to be displayed.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 16
+ * $WIZ$ max = 255
+ */
+#define CONFIG_LED_7SEG_STRLEN 255
+
+/**
+ * Default scrolling speed (ms * CONFIG_LED_7SEG_RTIME).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_SSPEED 10
+
+/**
+ * Default refresh time (ms).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_RTIME 5
+
+#endif /* CFG_LED_7SEG_H */
+ /** \} */ //defgroup drivers
+
* $WIZ$ type = "boolean"
*/
#define LWIP_SOCKET 1
+#if LWIP_SOCKET
+ /*
+ * The sockets.c file requires this macro to be defined to really
+ * set errno on errors.
+ */
+ #define ERRNO
+#endif
/**
* Enable BSD-style sockets functions names.
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief Configuration file for NAND driver module.
+ */
+
+#ifndef CFG_NAND_H
+#define CFG_NAND_H
+
+/**
+ * Page data size
+ *
+ * Size of the data section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_DATA_SIZE 2048
+
+/**
+ * Page spare area size
+ *
+ * Size of the spare section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_SPARE_SIZE 64
+
+/**
+ * Pages per block
+ *
+ * Number of pages in a erase block.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_PAGES_PER_BLOCK 64
+
+/**
+ * Number of blocks
+ *
+ * Total number of erase blocks in one NAND chip.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_BLOCK 2048
+
+/**
+ * Number of reserved blocks
+ *
+ * Blocks reserved for remapping defective NAND blocks.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_REMAP_BLOCKS 128
+
+/**
+ * NAND operations timeout
+ *
+ * How many milliseconds the cpu waits for
+ * completion of NAND operations.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_TMOUT 100
+
+/**
+ * Module logging level
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_NAND_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_NAND_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_NAND_H */
*/
#define CONFIG_KERN_PRI 1
+/**
+ * Priority-inheritance protocol.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI_INHERIT 0
+
/**
* Dynamic memory allocation for processes.
* $WIZ$ type = "boolean"
*/
#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+/**
+ * Enable the OLD pwm API.
+ * Not recommended for new projects.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CFG_PWM_ENABLE_OLD_API 1
+
#endif /* CFG_PWM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
*/
#define CONFIG_SD_AUTOASSIGN_FAT 1
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
/**
* Enable backward compatibility for sd_init().
* If enabled, sd_init() will allocate internally an Sd context,
* Edit these define for your project.
*/
+/**
+ * Enable port 0
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART0_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 0 [bytes].
* $WIZ$ type = "int"
*/
#define CONFIG_UART0_RXBUFSIZE 32
+/**
+ * Enable port 1
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART1_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_RXBUFSIZE 32
+/**
+ * Enable port 2
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and (not xmegad4)"
+ */
+#define CONFIG_UART2_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_RXBUFSIZE 32
+/**
+ * Enable port 3
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART3_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_RXBUFSIZE 32
+/**
+ * Enable port 4
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_RXBUFSIZE 32
+
+/**
+ * Enable port 5
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_RXBUFSIZE 32
+
+/**
+ * Enable port 6
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_RXBUFSIZE 32
+
+/**
+ * Enable port 7
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_RXBUFSIZE 32
/**
* Size of the outbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_TXBUFSIZE 32
* Size of the inbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_RXBUFSIZE 32
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
*/
#define CONFIG_USB_BUFSIZE 64
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
(dp9
S'path'
p10
-V/usr/local/toolchain/avr/bin/avr-gcc
+V/usr/bin/avr-gcc
p11
-ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
+ssS'PROJECT_HW_PATH_FROM_MAKEFILE'
p12
-Vboards/triface/benchmark/triface_context_switch
+Vboards/triface
p13
sS'ENABLED_MODULES'
p14
(lp15
-S'signal'
+S'context_switch'
p16
-aS'kernel'
+aS'formatwr'
p17
-aS'ser'
+aS'heap'
p18
-aS'kfile'
+aS'kernel'
p19
-aS'context_switch'
+aS'kfile'
p20
-aS'timer'
+aS'ser'
p21
-aS'formatwr'
+aS'signal'
p22
-aS'heap'
+aS'timer'
p23
asS'CPU_NAME'
p24
sS'PRESET'
p30
I01
-sS'PROJECT_HW_PATH_FROM_MAKEFILE'
+sS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p31
-Vboards/triface
+Vboards/triface/benchmark/triface_context_switch
p32
sS'OUTPUT'
p33
# Our target application
TRG += triface_context_switch
-triface_context_switch_PREFIX = "avr-"
+triface_context_switch_PREFIX = "/usr/bin/avr-"
triface_context_switch_SUFFIX = ""
# Files automatically generated by the wizard. DO NOT EDIT, USE triface_context_switch_USER_CSRC INSTEAD!
triface_context_switch_WIZARD_CSRC = \
bertos/benchmark/context_switch.c \
- bertos/mware/event.c \
- bertos/struct/heap.c \
- bertos/io/kfile.c \
- bertos/mware/formatwr.c \
+ bertos/cpu/avr/drv/ser_avr.c \
+ bertos/cpu/avr/drv/ser_mega.c \
bertos/cpu/avr/drv/timer_avr.c \
+ bertos/cpu/avr/drv/timer_mega.c \
+ bertos/drv/ser.c \
bertos/drv/timer.c \
- bertos/kern/signal.c \
+ bertos/io/kfile.c \
bertos/kern/proc.c \
- bertos/cpu/avr/drv/ser_avr.c \
- bertos/drv/ser.c \
+ bertos/kern/signal.c \
+ bertos/mware/event.c \
+ bertos/mware/formatwr.c \
bertos/mware/hex.c \
+ bertos/struct/heap.c \
#
# Files automatically generated by the wizard. DO NOT EDIT, USE triface_context_switch_USER_PCSRC INSTEAD!
*/
#define CONFIG_ADC_STROBE 0
+
+/**
+ * Start up timer[s] = startup value / ADCClock [Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_sut"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_SUT ADC_SUT512
+
+/**
+ * Analog Settling Time[s] = settling value / ADCClock[Hz]
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3_adc_stt"
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_STTLING ADC_AST17
+
+/**
+ * Tracking Time[s] = (TRACKTIM + 1) / ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRACKTIM 0
+
+/**
+ * Transfer Period[s] = (TRANSFER * 2 + 3) ADCClock[Hz]
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ supports = "sam3"
+ */
+#define CONFIG_ADC_TRANSFER 1
+
#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DAC module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DAC_H
+#define CFG_DAC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DAC_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DAC_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * DAC Refresh Period = 1024*REFRESH/DACC Clock
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 65536
+ */
+#define CONFIG_DAC_REFRESH 16
+
+/**
+ * DAC Startup Time Selection.
+ * see datasheet table.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "sam3x"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 63
+ */
+#define CONFIG_DAC_STARTUP 0
+
+/**
+ * DAC Trigger Selection.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sam3x_dac_tc"
+ * $WIZ$ supports = "sam3x"
+ */
+#define CONFIG_DAC_TIMER DACC_TRGSEL_TIO_CH0
+
+#endif /* CFG_DAC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
--- /dev/null
+/**
+ * \file cfg_led_7seg.h
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for led 7 segment display.
+ *
+ * \author Fabio Bizzi <fbizzi@bizzi.org>
+ *
+ * \addtogroup SevenSegDisplay 7 Segments LED Displays Driver
+ * \{
+ *
+ */
+
+#ifndef CFG_LED_7SEG_H
+#define CFG_LED_7SEG_H
+
+/**
+ * Use a Common Cathode display.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LED_7SEG_CCAT 0
+
+/**
+ * Number of digit present in the LED display.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ * $WIZ$ max = 8
+ */
+#define CONFIG_LED_7SEG_DIGIT 4
+
+/**
+ * Max lenght of the string to be displayed.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 16
+ * $WIZ$ max = 255
+ */
+#define CONFIG_LED_7SEG_STRLEN 255
+
+/**
+ * Default scrolling speed (ms * CONFIG_LED_7SEG_RTIME).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_SSPEED 10
+
+/**
+ * Default refresh time (ms).
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_LED_7SEG_RTIME 5
+
+#endif /* CFG_LED_7SEG_H */
+ /** \} */ //defgroup drivers
+
* $WIZ$ type = "boolean"
*/
#define LWIP_SOCKET 1
+#if LWIP_SOCKET
+ /*
+ * The sockets.c file requires this macro to be defined to really
+ * set errno on errors.
+ */
+ #define ERRNO
+#endif
/**
* Enable BSD-style sockets functions names.
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief Configuration file for NAND driver module.
+ */
+
+#ifndef CFG_NAND_H
+#define CFG_NAND_H
+
+/**
+ * Page data size
+ *
+ * Size of the data section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_DATA_SIZE 2048
+
+/**
+ * Page spare area size
+ *
+ * Size of the spare section of a programmable page in bytes.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_SPARE_SIZE 64
+
+/**
+ * Pages per block
+ *
+ * Number of pages in a erase block.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_PAGES_PER_BLOCK 64
+
+/**
+ * Number of blocks
+ *
+ * Total number of erase blocks in one NAND chip.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_BLOCK 2048
+
+/**
+ * Number of reserved blocks
+ *
+ * Blocks reserved for remapping defective NAND blocks.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_NUM_REMAP_BLOCKS 128
+
+/**
+ * NAND operations timeout
+ *
+ * How many milliseconds the cpu waits for
+ * completion of NAND operations.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_NAND_TMOUT 100
+
+/**
+ * Module logging level
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_NAND_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_NAND_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_NAND_H */
*/
#define CONFIG_KERN_PRI 1
+/**
+ * Priority-inheritance protocol.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI_INHERIT 0
+
/**
* Dynamic memory allocation for processes.
* $WIZ$ type = "boolean"
*/
#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+/**
+ * Enable the OLD pwm API.
+ * Not recommended for new projects.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CFG_PWM_ENABLE_OLD_API 1
+
#endif /* CFG_PWM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
*/
#define CONFIG_SD_AUTOASSIGN_FAT 1
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
/**
* Enable backward compatibility for sd_init().
* If enabled, sd_init() will allocate internally an Sd context,
* Edit these define for your project.
*/
+/**
+ * Enable port 0
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART0_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 0 [bytes].
* $WIZ$ type = "int"
*/
#define CONFIG_UART0_RXBUFSIZE 32
+/**
+ * Enable port 1
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART1_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_RXBUFSIZE 32
+/**
+ * Enable port 2
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and (not xmegad4)"
+ */
+#define CONFIG_UART2_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_RXBUFSIZE 32
+/**
+ * Enable port 3
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART3_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_RXBUFSIZE 32
+/**
+ * Enable port 4
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_RXBUFSIZE 32
+
+/**
+ * Enable port 5
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_RXBUFSIZE 32
+
+/**
+ * Enable port 6
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_RXBUFSIZE 32
+
+/**
+ * Enable port 7
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_RXBUFSIZE 32
/**
* Size of the outbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_TXBUFSIZE 32
* Size of the inbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_RXBUFSIZE 32
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
*/
#define CONFIG_USB_BUFSIZE 64
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
(dp9
S'path'
p10
-V/usr/local/toolchain/avr/bin/avr-gcc
+V/usr/bin/avr-gcc
p11
-ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
+ssS'PROJECT_HW_PATH_FROM_MAKEFILE'
p12
-Vboards/triface/benchmark/triface_kernel_footprint
+Vboards/triface
p13
sS'ENABLED_MODULES'
p14
(lp15
-S'signal'
+S'formatwr'
p16
-aS'kernel'
+aS'heap'
p17
-aS'kfile'
+aS'kernel'
p18
-aS'timer'
+aS'kernel_footprint'
p19
-aS'formatwr'
+aS'kfile'
p20
aS'msg'
p21
aS'semaphores'
p22
-aS'kernel_footprint'
+aS'signal'
p23
-aS'heap'
+aS'timer'
p24
asS'CPU_NAME'
p25
sS'PRESET'
p31
I01
-sS'PROJECT_HW_PATH_FROM_MAKEFILE'
+sS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p32
-Vboards/triface
+Vboards/triface/benchmark/triface_kernel_footprint
p33
sS'OUTPUT'
p34
# Our target application
TRG += triface_kernel_footprint
-triface_kernel_footprint_PREFIX = "avr-"
+triface_kernel_footprint_PREFIX = "/usr/bin/avr-"
triface_kernel_footprint_SUFFIX = ""
# Files automatically generated by the wizard. DO NOT EDIT, USE triface_kernel_footprint_USER_CSRC INSTEAD!
triface_kernel_footprint_WIZARD_CSRC = \
- bertos/mware/event.c \
- bertos/kern/sem.c \
- bertos/struct/heap.c \
- bertos/io/kfile.c \
- bertos/mware/formatwr.c \
+ bertos/benchmark/kernel_footprint.c \
bertos/cpu/avr/drv/timer_avr.c \
+ bertos/cpu/avr/drv/timer_mega.c \
bertos/drv/timer.c \
- bertos/kern/signal.c \
+ bertos/io/kfile.c \
bertos/kern/proc.c \
- bertos/benchmark/kernel_footprint.c \
+ bertos/kern/sem.c \
+ bertos/kern/signal.c \
+ bertos/mware/event.c \
+ bertos/mware/formatwr.c \
bertos/mware/hex.c \
+ bertos/struct/heap.c \
#
# Files automatically generated by the wizard. DO NOT EDIT, USE triface_kernel_footprint_USER_PCSRC INSTEAD!
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the HTTP module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HTTP_H
+#define CFG_HTTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define HTTP_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define HTTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Default start page to load
+ *
+ * $WIZ$ type = "str"
+ */
+#define HTTP_DEFAULT_PAGE "index.htm"
+
+#endif /* CFG_HTTP_H */
*
*
* \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
#ifndef CFG_I2S_H
#define CFG_I2S_H
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
/**
* Length of each play buffer.
*
#define CONFIG_SAMPLE_FREQ 44100UL
/**
- * Module logging level.
+ * Sample bits per channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_level"
+ * $WIZ$ type = "int"
+ * * $WIZ$ min = 8
+ * $WIZ$ max = 32
*/
-#define I2S_LOG_LEVEL LOG_LVL_INFO
+#define CONFIG_WORD_BIT_SIZE 16
/**
- * Module logging format.
+ * Number of channel.
*
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "log_format"
+ * $WIZ$ type = "int"
*/
-#define I2S_LOG_FORMAT LOG_FMT_TERSE
+#define CONFIG_CHANNEL_NUM 2
+
+/**
+ * Size of trasmit start delay
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 255
+ */
+#define CONFIG_DELAY 0
+
+/**
+ * Generate frame sync every 2 x CONFIG_PERIOD bits (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 512
+ */
+#define CONFIG_PERIOD 15
+
+/**
+ * Number of words transmitted in frame
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 16
+ */
+#define CONFIG_WORD_PER_FRAME 1
+
+/**
+ * Size of Synchro data register (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_FRAME_SYNC_SIZE 15
+
+
+/**
+ * Extra Size of Synchro data register (CONFIG_FRAME_SYNC_SIZE + CONFIG_EXTRA_FRAME_SYNC_SIZE * 16 + 1) (zero based)
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 15
+ */
+#define CONFIG_EXTRA_FRAME_SYNC_SIZE 0
#endif /* CFG_I2S_H */
*/
#define CONFIG_INI_MAX_LINE_LEN 64
+/**
+ * Make case insensitive comparisons.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_INI_CASE_INSENSITIVE 0
+
#endif /* CFG_INI_READER_H */
*/
#define CONFIG_SD_AUTOASSIGN_FAT 1
+/**
+ * SD bus mode.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "sd_mode"
+ */
+#define CONFIG_SD_MODE SD_SPI_MODE
+
/**
* Enable backward compatibility for sd_init().
* If enabled, sd_init() will allocate internally an Sd context,
* Edit these define for your project.
*/
+/**
+ * Enable port 0
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART0_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 0 [bytes].
* $WIZ$ type = "int"
*/
#define CONFIG_UART0_RXBUFSIZE 32
+/**
+ * Enable port 1
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART1_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 1 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
*/
#define CONFIG_UART1_RXBUFSIZE 32
+/**
+ * Enable port 2
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and (not xmegad4)"
+ */
+#define CONFIG_UART2_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 2 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
*/
#define CONFIG_UART2_RXBUFSIZE 32
+/**
+ * Enable port 3
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART3_ENABLED 1
+
/**
* Size of the outbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_TXBUFSIZE 32
* Size of the inbound FIFO buffer for port 3 [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
*/
#define CONFIG_UART3_RXBUFSIZE 32
+/**
+ * Enable port 4
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_RXBUFSIZE 32
+
+/**
+ * Enable port 5
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_RXBUFSIZE 32
+
+/**
+ * Enable port 6
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_RXBUFSIZE 32
+
+/**
+ * Enable port 7
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_RXBUFSIZE 32
/**
* Size of the outbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_TXBUFSIZE 32
* Size of the inbound FIFO buffer for SPI port [bytes].
* $WIZ$ type = "int"
* $WIZ$ min = 2
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_RXBUFSIZE 32
*
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
/**
* SPI clock division factor.
* $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_DIV 16
* SPI clock polarity: normal low or normal high.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
* sample on second clock edge.
* $WIZ$ type = "enum"
* $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
*/
#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the WM8731 module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WM8731_H
+#define CFG_WM8731_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define WM8731_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define WM8731_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC 0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU 0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST 0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS 0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES 0x6
+
+#endif /* CFG_WM8731_H */
p10
Vavr-gcc
p11
-ssS'PROJECT_SRC_PATH_FROM_MAKEFILE'
+ssS'PROJECT_HW_PATH_FROM_MAKEFILE'
p12
-Vboards/triface/examples/triface
+Vboards/triface
p13
sS'ENABLED_MODULES'
p14
sS'PRESET'
p35
I01
-sS'PROJECT_HW_PATH_FROM_MAKEFILE'
+sS'PROJECT_SRC_PATH_FROM_MAKEFILE'
p36
-Vboards/triface
+Vboards/triface/examples/triface
p37
sS'OUTPUT'
p38
triface_HW_PATH = boards/triface
-ifeq ($(CPU), atmega1281)
- triface_hfuse = 0x98
- triface_lfuse = 0x3d
- triface_efuse = 0x7f
- triface_lock = 0x2f
-else
- triface_hfuse = 0x88
- triface_lfuse = 0xff
- triface_efuse = 0xff
- triface_lock = 0x2f
-endif
-
# Files automatically generated by the wizard. DO NOT EDIT, USE triface_USER_CSRC INSTEAD!
triface_WIZARD_CSRC = \
bertos/cpu/avr/drv/adc_avr.c \
projects / bertos.git / commitdiff