--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the AX25 protocol module.
+ *
+ * \version $Id$
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef CFG_AX25_H
+#define CFG_AX25_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define AX25_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define AX25_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * AX25 frame buffer lenght.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 18
+ */
+#define CONFIG_AX25_FRAME_BUF_LEN 330
+
+
+/**
+ * Enable repeaters listing in AX25 frames.
+ * If enabled use 56 addtional bytes of RAM
+ * for each message received.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_AX25_RPT_LST 1
+
+#endif /* CFG_AX25_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ * \brief Simple AX25 data link layer implementation.
+ *
+ * For now, only UI frames without any Layer 3 protocol are handled.
+ * This however is enough to send/receive APRS packets.
+ *
+ * \version $Id$
+ * \author Francesco Sacchi <batt@develer.com>
+ *
+ */
+
+#include "ax25.h"
+#include "cfg/cfg_ax25.h"
+
+#include <drv/afsk.h>
+#include <algo/crc_ccitt.h>
+
+#define LOG_LEVEL AX25_LOG_LEVEL
+#define LOG_FORMAT AX25_LOG_FORMAT
+#include <cfg/log.h>
+
+#include <string.h> //memset
+
+#define DECODE_CALL(buf, addr) \
+ for (unsigned i = 0; i < sizeof((addr)); i++) \
+ { \
+ ASSERT(!(*(buf) & 0x01)); \
+ (addr)[i] = *(buf)++ >> 1; \
+ }
+
+static void ax25_decode(AX25Ctx *ctx)
+{
+ AX25Msg msg;
+ uint8_t *buf = ctx->buf;
+
+ DECODE_CALL(buf, msg.dst.call);
+ ASSERT(!(*buf & 0x01));
+ msg.dst.ssid = (*buf++ >> 1) & 0x0F;
+
+ DECODE_CALL(buf, msg.src.call);
+ msg.src.ssid = (*buf >> 1) & 0x0F;
+
+ LOG_INFO("SRC[%.6s-%d], DST[%.6s-%d]\n", msg.src.call, msg.src.ssid, msg.dst.call, msg.dst.ssid);
+
+ /* Repeater addresses */
+ #if CONFIG_AX25_RPT_LST
+ for (msg.rpt_cnt = 0; !(*buf++ & 0x01) && (msg.rpt_cnt < countof(msg.rpt_lst)); msg.rpt_cnt++)
+ {
+ DECODE_CALL(buf, msg.rpt_lst[msg.rpt_cnt].call);
+ msg.rpt_lst[msg.rpt_cnt].ssid = (*buf >> 1) & 0x0F;
+ LOG_INFO("RPT%d[%.6s-%d]\n", msg.rpt_cnt, msg.rpt_lst[msg.rpt_cnt].call, msg.rpt_lst[msg.rpt_cnt].ssid);
+ }
+ #else
+ while (!(*buf++ & 0x01))
+ {
+ char rpt[6];
+ uint8_t ssid;
+ DECODE_CALL(buf, rpt);
+ ssid = (*buf >> 1) & 0x0F;
+ LOG_INFO("RPT[%.6s-%d]\n", rpt, ssid);
+ }
+ #endif
+
+ msg.ctrl = *buf++;
+ if (msg.ctrl != AX25_CTRL_UI)
+ {
+ LOG_INFO("Only UI frames are handled, got [%02X]\n", msg.ctrl);
+ return;
+ }
+
+ msg.pid = *buf++;
+ if (msg.pid != AX25_PID_NOLAYER3)
+ {
+ LOG_INFO("Only frames without layer3 protocol are handled, got [%02X]\n", msg.pid);
+ return;
+ }
+
+ msg.len = ctx->frm_len - 2 - (buf - ctx->buf);
+ msg.info = buf;
+ LOG_INFO("DATA[%.*s]\n", msg.len, msg.info);
+
+ if (ctx->hook)
+ ctx->hook(&msg);
+}
+
+void ax25_poll(AX25Ctx *ctx)
+{
+ int c;
+
+ while ((c = kfile_getc(ctx->ch)) != EOF)
+ {
+ if (!ctx->escape && c == HDLC_FLAG)
+ {
+ LOG_INFO("Frame start\n");
+ if (ctx->frm_len >= AX25_MIN_FRAME_LEN)
+ {
+ if (ctx->crc_in == AX25_CRC_CORRECT)
+ {
+ LOG_INFO("Frame found!\n");
+ ax25_decode(ctx);
+ }
+ else
+ {
+ LOG_INFO("CRC error, computed [%04X]\n", ctx->crc_in);
+ }
+ }
+ ctx->sync = true;
+ ctx->crc_in = CRC_CCITT_INIT_VAL;
+ ctx->frm_len = 0;
+ continue;
+ }
+
+ if (!ctx->escape && c == HDLC_RESET)
+ {
+ LOG_INFO("HDLC reset\n");
+ ctx->sync = false;
+ continue;
+ }
+
+ if (!ctx->escape && c == AX25_ESC)
+ {
+ ctx->escape = true;
+ continue;
+ }
+
+ if (ctx->sync)
+ {
+ if (ctx->frm_len < CONFIG_AX25_FRAME_BUF_LEN)
+ {
+ ctx->buf[ctx->frm_len++] = c;
+ ctx->crc_in = updcrc_ccitt(c, ctx->crc_in);
+ }
+ else
+ {
+ LOG_INFO("Buffer overrun");
+ ctx->sync = false;
+ }
+ }
+ ctx->escape = false;
+ }
+
+ if (kfile_error(ctx->ch))
+ {
+ LOG_ERR("Channel error [%04x]\n", kfile_error(ctx->ch));
+ kfile_clearerr(ctx->ch);
+ }
+}
+
+void ax25_init(AX25Ctx *ctx, KFile *channel, ax25_callback_t hook)
+{
+ ASSERT(ctx);
+ ASSERT(channel);
+
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->ch = channel;
+ ctx->hook = hook;
+ ctx->crc_in = ctx->crc_out = CRC_CCITT_INIT_VAL;
+}
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ * \brief Simple AX25 data link layer implementation.
+ *
+ * For now, only UI frames without any Layer 3 protocol are handled.
+ * This however is enough to send/receive APRS packets.
+ *
+ * \version $Id$
+ * \author Francesco Sacchi <batt@develer.com>
+ *
+ * $WIZ$ module_name = "ax25"
+ * $WIZ$ module_configuration = "bertos/cfg/cfg_ax25.h"
+ * $WIZ$ module_depends = "kfile"
+ */
+
+
+#ifndef NET_AX25_H
+#define NET_AX25_H
+
+#include "cfg/cfg_ax25.h"
+
+#include <cfg/compiler.h>
+#include <kern/kfile.h>
+
+/**
+ * Maximum size of a AX25 frame.
+ */
+#define AX25_MIN_FRAME_LEN 18
+
+/**
+ * CRC computation on correct AX25 packets should
+ * give this result (don't ask why).
+ */
+#define AX25_CRC_CORRECT 0xF0B8
+
+struct AX25Msg; // fwd declaration
+
+/**
+ * Type for AX25 messages callback.
+ */
+typedef void (*ax25_callback_t)(struct AX25Msg *msg);
+
+
+/**
+ * AX25 Protocol context.
+ */
+typedef struct AX25Ctx
+{
+ uint8_t buf[CONFIG_AX25_FRAME_BUF_LEN]; ///< buffer for received chars
+ KFile *ch; ///< KFile used to access the physical medium
+ size_t frm_len; ///< received frame length.
+ uint16_t crc_in; ///< CRC for current received frame
+ uint16_t crc_out; ///< CRC of current sent frame
+ ax25_callback_t hook; ///< Hook function to be called when a message is received
+ bool sync; ///< True if we have received a HDLC flag.
+ bool escape; ///< True when we have to escape the following char.
+} AX25Ctx;
+
+
+/**
+ * AX25 Call sign.
+ */
+typedef struct AX25Call
+{
+ char call[6]; ///< Call string, max 6 character
+ uint8_t ssid; ///< SSID (secondary station ID) for the call
+} AX25Call;
+
+/**
+ * Maximum number of Repeaters in a AX25 message.
+ */
+#define AX25_MAX_RPT 8
+
+
+/**
+ * AX25 Message.
+ * Used to handle AX25 sent/received messages.
+ */
+typedef struct AX25Msg
+{
+ AX25Call src; ///< Source adress
+ AX25Call dst; ///< Destination address
+ #if CONFIG_AX25_RPT_LST
+ AX25Call rpt_lst[AX25_MAX_RPT]; ///< List of repeaters
+ uint8_t rpt_cnt; ///< Number of repeaters in this message
+ #endif
+ uint16_t ctrl; ///< AX25 control field
+ uint8_t pid; ///< AX25 PID field
+ uint8_t *info; ///< Pointer to the info field (payload) of the message
+ size_t len; ///< Payload length
+} AX25Msg;
+
+#define AX25_CTRL_UI 0x03
+#define AX25_PID_NOLAYER3 0xF0
+
+/**
+ * HDLC flags
+ * These should be moved in
+ * a separated HDLC related file one day...
+ * \{
+ */
+#define HDLC_FLAG 0x7E
+#define HDLC_RESET 0x7F
+#define AX25_ESC 0x1B
+/* \} */
+
+
+/**
+ * Check if there are any AX25 messages to be processed.
+ * This function read available characters from the medium and search for
+ * any AX25 messages.
+ * If a message is found it is decoded and the linked callback executed.
+ * This function may be blocking if there are no available chars and the KFile
+ * used in \a ctx to access the medium is configured in blocking mode.
+ *
+ * \param ctx AX25 context to operate on.
+ */
+void ax25_poll(AX25Ctx *ctx);
+
+/**
+ * Init the AX25 protocol decoder.
+ *
+ * \param ctx AX25 context to init.
+ * \param channel Used to gain access to the physical medium
+ * \param hook Callback function called when a message is received
+ */
+void ax25_init(AX25Ctx *ctx, KFile *channel, ax25_callback_t hook);
+
+#endif /* NET_AX25_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief AX25 test.
+ *
+ * \version $Id$
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#include "ax25.h"
+
+#include <drv/afsk.h>
+#include <struct/kfile_mem.h>
+
+#include <cfg/debug.h>
+#include <cfg/test.h>
+
+#include <string.h> //strncmp
+
+static AX25Ctx ax25;
+static KFileMem mem;
+
+uint8_t aprs_packet[] =
+{
+ HDLC_FLAG,
+ 0x82, 0xA0, 0xA4, 0xA6, 0x40, 0x40, 0xE0, 0xA6, 0x6A, 0x6E, 0x98, 0x9C, 0x40, 0x61, 0x03, 0xF0,
+ 0x3D, 0x34, 0x36, 0x30, 0x33, 0x2E, 0x36, 0x33, 0x4E, 0x2F, 0x30, 0x31, 0x34, 0x33, 0x31, 0x2E,
+ 0x32, 0x36, 0x45, 0x2D, 0x4F, 0x70, 0x2E, 0x20, 0x41, 0x6E, 0x64, 0x72, 0x65, 0x6A, 0x40, 0x65,
+ HDLC_FLAG,
+};
+
+static void msg_callback(AX25Msg *msg)
+{
+ ASSERT(strncmp(msg->dst.call, "APRS ", 6) == 0);
+ ASSERT(strncmp(msg->src.call, "S57LN ", 6) == 0);
+ ASSERT(msg->src.ssid == 0);
+ ASSERT(msg->dst.ssid == 0);
+ ASSERT(msg->ctrl == AX25_CTRL_UI);
+ ASSERT(msg->pid == AX25_PID_NOLAYER3);
+ ASSERT(msg->len == 30);
+ ASSERT(strncmp((char *)msg->info, "=4603.63N/01431.26E-Op. Andrej", 30) == 0);
+}
+
+int ax25_testSetup(void)
+{
+ kdbg_init();
+ kfilemem_init(&mem, aprs_packet, sizeof(aprs_packet));
+ ax25_init(&ax25, &mem.fd, msg_callback);
+ return 0;
+}
+
+int ax25_testTearDown(void)
+{
+ return 0;
+}
+
+int ax25_testRun(void)
+{
+ ax25_poll(&ax25);
+ return 0;
+}
+
+TEST_MAIN(ax25);
-o -name "*_test.c" -print` }
TESTOUT="testout"
-SRC_LIST="bertos/algo/ramp.c bertos/drv/kdebug.c bertos/drv/timer.c bertos/fs/battfs.c bertos/kern/coop.c bertos/kern/idle.c bertos/kern/kfile.c bertos/kern/monitor.c bertos/kern/proc.c bertos/kern/signal.c bertos/kern/sem.c bertos/mware/event.c bertos/mware/formatwr.c bertos/mware/hex.c bertos/mware/sprintf.c bertos/os/hptime.c bertos/struct/kfile_fifo.c bertos/fs/fatfs/ff.c bertos/emul/diskio_emul.c bertos/fs/fat.c bertos/emul/switch_ctx_emul.S bertos/mware/ini_reader.c bertos/emul/kfile_posix.c bertos/algo/crc_ccitt.c bertos/algo/crc.c bertos/struct/kfile_mem.c"
+SRC_LIST="bertos/algo/ramp.c bertos/drv/kdebug.c bertos/drv/timer.c bertos/fs/battfs.c bertos/kern/coop.c bertos/kern/idle.c bertos/kern/kfile.c bertos/kern/monitor.c bertos/kern/proc.c bertos/kern/signal.c bertos/kern/sem.c bertos/mware/event.c bertos/mware/formatwr.c bertos/mware/hex.c bertos/mware/sprintf.c bertos/os/hptime.c bertos/struct/kfile_fifo.c bertos/fs/fatfs/ff.c bertos/emul/diskio_emul.c bertos/fs/fat.c bertos/emul/switch_ctx_emul.S bertos/mware/ini_reader.c bertos/emul/kfile_posix.c bertos/algo/crc_ccitt.c bertos/algo/crc.c bertos/struct/kfile_mem.c bertos/net/ax25.c"
buildout='/dev/null'
runout='/dev/null'
projects / bertos.git / commitdiff