--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \version $Id: $
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ *
+ * \brief AT91SAM7S256 CRT, adapted from NUt/OS, see license below.
+ */
+
+/*
+ * Copyright (C) 2005-2007 by egnite Software GmbH. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY EGNITE SOFTWARE GMBH AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL EGNITE
+ * SOFTWARE GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+ * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * For additional information see http://www.ethernut.de/
+ *
+ */
+
+#include "hw_cpu.h"
+#include <cpu/detect.h>
+
+
+#if CLOCK_FREQ != 48023000L
+#error Clock registers set for 48MHz operation, revise following code if you want a different clock.
+#endif
+
+
+#if CPU_ARM_AT91SAM7S256 || CPU_ARM_AT91SAM7X256
+ /**
+ * With a 18.420MHz cristal, master clock is:
+ * (((18.420 * PLL_MUL_VAL + 1) / PLL_DIV_VAL) / AT91MCK_PRES) = 48.023MHz
+ */
+ #define PLL_MUL_VAL 72 /**< Real multiplier value is PLL_MUL_VAL + 1! */
+ #define PLL_DIV_VAL 14
+ #define AT91MCK_PRES PMC_PRES_CLK_2
+
+ /**
+ * Register I/O adresses.
+ * \{
+ */
+ #define MC_BASE 0xFFFFFF00
+ #define MC_FMR_OFF 0x00000060
+ #define MC_FWS_2R3W 0x00000100
+
+ #define AIC_BASE 0xFFFFF000
+ #define AIC_EOICR_OFF 0x00000130
+ #define AIC_IDCR_OFF 0x00000124
+
+ #define WDT_BASE 0xFFFFFD40
+ #define WDT_MR_OFF 0x00000004
+ #define WDT_WDDIS (1 << 15)
+
+ #define PMC_BASE 0xFFFFFC00
+ #define PMC_SR_OFF 0x00000068
+ #define PMC_MCKR_OFF 0x00000030
+ #define PMC_MOSCS (1 << 0)
+ #define PMC_LOCK (1 << 2)
+ #define PMC_MCKRDY (1 << 3)
+ #define PMC_CSS_PLL_CLK 0x00000003
+ #define PMC_PRES_CLK_2 0x00000004
+
+ #define CKGR_MOR_OFF 0x00000020
+ #define CKGR_PLLR_OFF 0x0000002C
+ #define CKGR_MOSCEN (1 << 0)
+ #define CKGR_MUL_SHIFT 16
+ #define CKGR_PLLCOUNT_SHIFT 8
+
+ #define RSTC_MR 0xFFFFFD08
+ #define RSTC_KEY 0xA5000000
+ #define RSTC_URSTEN (1 << 0)
+
+ #define ARM_MODE_FIQ 0x11
+ #define ARM_MODE_IRQ 0x12
+ #define ARM_MODE_SVC 0x13
+ #define ARM_MODE_ABORT 0x17
+ #define ARM_MODE_UNDEF 0x1B
+
+#else
+ #error No register I/O definition for selected ARM CPU
+#endif
+/*\}*/
+
+/*
+ * Section 0: Vector table and reset entry.
+ */
+ .section .vectors,"ax",%progbits
+
+ .global __vectors
+__vectors:
+ ldr pc, [pc, #24] /* Reset */
+ ldr pc, [pc, #24] /* Undefined instruction */
+ ldr pc, [pc, #24] /* Software interrupt */
+ ldr pc, [pc, #24] /* Prefetch abort */
+ ldr pc, [pc, #24] /* Data abort */
+ ldr pc, [pc, #24] /* Reserved */
+
+ /*
+ * On IRQ the PC will be loaded from AIC_IVR, which
+ * provides the address previously set in AIC_SVR.
+ * The interrupt routine will be called in ARM_MODE_IRQ
+ * with IRQ disabled and FIQ unchanged.
+ */
+ ldr pc, [pc, #-0xF20] /* Interrupt request, auto vectoring. */
+ ldr pc, [pc, #-0xF20] /* Fast interrupt request, auto vectoring. */
+
+ .word _init
+ .word __undef
+ .word __swi
+ .word __prefetch_abort
+ .word __data_abort
+
+ .weak __undef
+ .set __undef, __xcpt_dummy_undef
+ .weak __swi
+ .set __swi, __xcpt_dummy_swi
+ .weak __prefetch_abort
+ .set __prefetch_abort, __xcpt_dummy_pref
+ .weak __data_abort
+ .set __data_abort, __xcpt_dummy_dab
+
+/** .global __xcpt_dummy*/
+__xcpt_dummy_undef:
+ b __xcpt_dummy_undef
+
+__xcpt_dummy_swi:
+ b __xcpt_dummy_swi
+
+__xcpt_dummy_pref:
+ b __xcpt_dummy_pref
+
+__xcpt_dummy_dab:
+ b __xcpt_dummy_dab
+
+
+ .ltorg
+/*
+ * Hardware initialization.
+ */
+ .section .init, "ax", %progbits
+ .globl _init
+_init:
+ /*
+ * Use 2 cycles for flash access.
+ */
+ ldr r1, =MC_BASE
+ mov r0, #MC_FWS_2R3W
+ str r0, [r1, #MC_FMR_OFF]
+
+ /*
+ * Disable all interrupts. Useful for debugging w/o target reset.
+ */
+ ldr r1, =AIC_BASE
+ mvn r0, #0
+ str r0, [r1, #AIC_EOICR_OFF]
+ str r0, [r1, #AIC_IDCR_OFF]
+
+ /*
+ * The watchdog is enabled after processor reset. Disable it.
+ */
+ ldr r1, =WDT_BASE
+ ldr r0, =WDT_WDDIS
+ str r0, [r1, #WDT_MR_OFF]
+
+ /*
+ * Enable the main oscillator. Set startup time of 6 * 8 slow
+ * clock cycles and wait until oscillator is stabilized.
+ */
+ ldr r1, =PMC_BASE
+ mov r0, #(6 << 8)
+ orr r0, r0, #CKGR_MOSCEN
+ str r0, [r1, #CKGR_MOR_OFF]
+wait_moscs:
+ ldr r0, [r1, #PMC_SR_OFF]
+ tst r0, #PMC_MOSCS
+ beq wait_moscs
+
+ /*
+ * Set PLL:
+ * PLLfreq = crystal / divider * (multiplier + 1)
+ * Wait 28 clock cycles until PLL is locked.
+ */
+ ldr r0, =((PLL_MUL_VAL << CKGR_MUL_SHIFT) | (28 << CKGR_PLLCOUNT_SHIFT) | PLL_DIV_VAL)
+
+ str r0, [r1, #CKGR_PLLR_OFF]
+wait_lock:
+ ldr r0, [r1, #PMC_SR_OFF]
+ tst r0, #PMC_LOCK
+ beq wait_lock
+
+ /*
+ * Set master clock prescaler.
+ */
+ mov r0, #AT91MCK_PRES
+ str r0, [r1, #PMC_MCKR_OFF]
+wait_presrdy:
+ ldr r0, [r1, #PMC_SR_OFF]
+ tst r0, #PMC_MCKRDY
+ beq wait_presrdy
+
+ /*
+ * Switch to PLL clock. Trying to set this together with the
+ * prescaler fails (see datasheets).
+ */
+ ldr r0, [r1, #PMC_MCKR_OFF]
+ orr r0, r0, #PMC_CSS_PLL_CLK
+ str r0, [r1, #PMC_MCKR_OFF]
+wait_pllsel:
+ ldr r0, [r1, #PMC_SR_OFF]
+ tst r0, #PMC_MCKRDY
+ beq wait_pllsel
+
+ /*
+ * Enable external reset key.
+ */
+ ldr r0, =(RSTC_KEY | RSTC_URSTEN)
+ ldr r1, =RSTC_MR
+ str r0, [r1, #0]
+
+ /*
+ * Set exception stack pointers
+ */
+ ldr r0, =__stack_fiq_end
+ msr CPSR_c, #ARM_MODE_FIQ | 0xC0
+ mov r13, r0
+ ldr r0, =__stack_irq_end
+ msr CPSR_c, #ARM_MODE_IRQ | 0xC0
+ mov r13, r0
+ ldr r0, =__stack_abt_end
+ msr CPSR_c, #ARM_MODE_ABORT | 0xC0
+ mov r13, r0
+ ldr r0, =__stack_und_end
+ msr CPSR_c, #ARM_MODE_UNDEF | 0xC0
+ mov r13, r0
+ ldr r0, =__stack_svc_end
+ msr CPSR_c, #ARM_MODE_SVC | 0xC0
+ mov r13, r0
+
+ /*
+ * Clear .bss
+ */
+ ldr r1, =__bss_start
+ ldr r2, =__bss_end
+ ldr r3, =0
+
+_40:
+ cmp r1, r2
+ strne r3, [r1], #+4
+ bne _40
+
+ /*
+ * Relocate .data section (Copy from ROM to RAM).
+ */
+ ldr r1, =__etext
+ ldr r2, =__data_start
+ ldr r3, =__data_end
+
+_41:
+ cmp r2, r3
+ ldrlo r0, [r1], #4
+ strlo r0, [r2], #4
+ blo _41
+
+ /*
+ * Initialize user stack pointer.
+ */
+ ldr r13, =__stack_end
+
+ /*
+ * Jump to main
+ */
+ ldr r0, =main
+ bx r0
+
+End:
+ b End
+
+ .ltorg
+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \version $Id: $
- *
- * \author Francesco Sacchi <batt@develer.com>
- *
- * \brief AT91SAM7S256 CRT, adapted from NUt/OS, see license below.
- */
-
-/*
- * Copyright (C) 2005-2007 by egnite Software GmbH. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the copyright holders nor the names of
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY EGNITE SOFTWARE GMBH AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL EGNITE
- * SOFTWARE GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
- * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * For additional information see http://www.ethernut.de/
- *
- */
-
-#include "hw_cpu.h"
-
-
-#if CLOCK_FREQ != 48023000L
-#error Clock registers set for 48MHz operation, revise following code if you want a different clock.
-#endif
-
-/**
- * With a 18.420MHz cristal, master clock is:
- * (((18.420 * PLL_MUL_VAL + 1) / PLL_DIV_VAL) / AT91MCK_PRES) = 48.023MHz
- */
-#define PLL_MUL_VAL 72 /**< Real multiplier value is PLL_MUL_VAL + 1! */
-#define PLL_DIV_VAL 14
-#define AT91MCK_PRES PMC_PRES_CLK_2
-
-/**
- * Register I/O adresses.
- * \{
- */
-#define MC_BASE 0xFFFFFF00
-#define MC_FMR_OFF 0x00000060
-#define MC_FWS_2R3W 0x00000100
-
-#define AIC_BASE 0xFFFFF000
-#define AIC_EOICR_OFF 0x00000130
-#define AIC_IDCR_OFF 0x00000124
-
-#define WDT_BASE 0xFFFFFD40
-#define WDT_MR_OFF 0x00000004
-#define WDT_WDDIS (1 << 15)
-
-#define PMC_BASE 0xFFFFFC00
-#define PMC_SR_OFF 0x00000068
-#define PMC_MCKR_OFF 0x00000030
-#define PMC_MOSCS (1 << 0)
-#define PMC_LOCK (1 << 2)
-#define PMC_MCKRDY (1 << 3)
-#define PMC_CSS_PLL_CLK 0x00000003
-#define PMC_PRES_CLK_2 0x00000004
-
-#define CKGR_MOR_OFF 0x00000020
-#define CKGR_PLLR_OFF 0x0000002C
-#define CKGR_MOSCEN (1 << 0)
-#define CKGR_MUL_SHIFT 16
-#define CKGR_PLLCOUNT_SHIFT 8
-
-#define RSTC_MR 0xFFFFFD08
-#define RSTC_KEY 0xA5000000
-#define RSTC_URSTEN (1 << 0)
-
-#define ARM_MODE_FIQ 0x11
-#define ARM_MODE_IRQ 0x12
-#define ARM_MODE_SVC 0x13
-#define ARM_MODE_ABORT 0x17
-#define ARM_MODE_UNDEF 0x1B
-
-/*\}*/
-
-/*
- * Section 0: Vector table and reset entry.
- */
- .section .vectors,"ax",%progbits
-
- .global __vectors
-__vectors:
- ldr pc, [pc, #24] /* Reset */
- ldr pc, [pc, #24] /* Undefined instruction */
- ldr pc, [pc, #24] /* Software interrupt */
- ldr pc, [pc, #24] /* Prefetch abort */
- ldr pc, [pc, #24] /* Data abort */
- ldr pc, [pc, #24] /* Reserved */
-
- /*
- * On IRQ the PC will be loaded from AIC_IVR, which
- * provides the address previously set in AIC_SVR.
- * The interrupt routine will be called in ARM_MODE_IRQ
- * with IRQ disabled and FIQ unchanged.
- */
- ldr pc, [pc, #-0xF20] /* Interrupt request, auto vectoring. */
- ldr pc, [pc, #-0xF20] /* Fast interrupt request, auto vectoring. */
-
- .word _init
- .word __undef
- .word __swi
- .word __prefetch_abort
- .word __data_abort
-
- .weak __undef
- .set __undef, __xcpt_dummy_undef
- .weak __swi
- .set __swi, __xcpt_dummy_swi
- .weak __prefetch_abort
- .set __prefetch_abort, __xcpt_dummy_pref
- .weak __data_abort
- .set __data_abort, __xcpt_dummy_dab
-
-/** .global __xcpt_dummy*/
-__xcpt_dummy_undef:
- b __xcpt_dummy_undef
-
-__xcpt_dummy_swi:
- b __xcpt_dummy_swi
-
-__xcpt_dummy_pref:
- b __xcpt_dummy_pref
-
-__xcpt_dummy_dab:
- b __xcpt_dummy_dab
-
-
- .ltorg
-/*
- * Hardware initialization.
- */
- .section .init, "ax", %progbits
- .globl _init
-_init:
- /*
- * Use 2 cycles for flash access.
- */
- ldr r1, =MC_BASE
- mov r0, #MC_FWS_2R3W
- str r0, [r1, #MC_FMR_OFF]
-
- /*
- * Disable all interrupts. Useful for debugging w/o target reset.
- */
- ldr r1, =AIC_BASE
- mvn r0, #0
- str r0, [r1, #AIC_EOICR_OFF]
- str r0, [r1, #AIC_IDCR_OFF]
-
- /*
- * The watchdog is enabled after processor reset. Disable it.
- */
- ldr r1, =WDT_BASE
- ldr r0, =WDT_WDDIS
- str r0, [r1, #WDT_MR_OFF]
-
- /*
- * Enable the main oscillator. Set startup time of 6 * 8 slow
- * clock cycles and wait until oscillator is stabilized.
- */
- ldr r1, =PMC_BASE
- mov r0, #(6 << 8)
- orr r0, r0, #CKGR_MOSCEN
- str r0, [r1, #CKGR_MOR_OFF]
-wait_moscs:
- ldr r0, [r1, #PMC_SR_OFF]
- tst r0, #PMC_MOSCS
- beq wait_moscs
-
- /*
- * Set PLL:
- * PLLfreq = crystal / divider * (multiplier + 1)
- * Wait 28 clock cycles until PLL is locked.
- */
- ldr r0, =((PLL_MUL_VAL << CKGR_MUL_SHIFT) | (28 << CKGR_PLLCOUNT_SHIFT) | PLL_DIV_VAL)
-
- str r0, [r1, #CKGR_PLLR_OFF]
-wait_lock:
- ldr r0, [r1, #PMC_SR_OFF]
- tst r0, #PMC_LOCK
- beq wait_lock
-
- /*
- * Set master clock prescaler.
- */
- mov r0, #AT91MCK_PRES
- str r0, [r1, #PMC_MCKR_OFF]
-wait_presrdy:
- ldr r0, [r1, #PMC_SR_OFF]
- tst r0, #PMC_MCKRDY
- beq wait_presrdy
-
- /*
- * Switch to PLL clock. Trying to set this together with the
- * prescaler fails (see datasheets).
- */
- ldr r0, [r1, #PMC_MCKR_OFF]
- orr r0, r0, #PMC_CSS_PLL_CLK
- str r0, [r1, #PMC_MCKR_OFF]
-wait_pllsel:
- ldr r0, [r1, #PMC_SR_OFF]
- tst r0, #PMC_MCKRDY
- beq wait_pllsel
-
- /*
- * Enable external reset key.
- */
- ldr r0, =(RSTC_KEY | RSTC_URSTEN)
- ldr r1, =RSTC_MR
- str r0, [r1, #0]
-
- /*
- * Set exception stack pointers
- */
- ldr r0, =__stack_fiq_end
- msr CPSR_c, #ARM_MODE_FIQ | 0xC0
- mov r13, r0
- ldr r0, =__stack_irq_end
- msr CPSR_c, #ARM_MODE_IRQ | 0xC0
- mov r13, r0
- ldr r0, =__stack_abt_end
- msr CPSR_c, #ARM_MODE_ABORT | 0xC0
- mov r13, r0
- ldr r0, =__stack_und_end
- msr CPSR_c, #ARM_MODE_UNDEF | 0xC0
- mov r13, r0
- ldr r0, =__stack_svc_end
- msr CPSR_c, #ARM_MODE_SVC | 0xC0
- mov r13, r0
-
- /*
- * Clear .bss
- */
- ldr r1, =__bss_start
- ldr r2, =__bss_end
- ldr r3, =0
-
-_40:
- cmp r1, r2
- strne r3, [r1], #+4
- bne _40
-
- /*
- * Relocate .data section (Copy from ROM to RAM).
- */
- ldr r1, =__etext
- ldr r2, =__data_start
- ldr r3, =__data_end
-
-_41:
- cmp r2, r3
- ldrlo r0, [r1], #4
- strlo r0, [r2], #4
- blo _41
-
- /*
- * Initialize user stack pointer.
- */
- ldr r13, =__stack_end
-
- /*
- * Jump to main
- */
- ldr r0, =main
- bx r0
-
-End:
- b End
-
- .ltorg
projects / bertos.git / commitdiff