Move ser posix to emul dir.

git-svn-id: https://src.develer.com/svnoss/bertos/trunk@1291 38d2e660-2303-0410-9eaa-f027e97ec537

diff --git a/bertos/drv/ser_posix.c b/bertos/drv/ser_posix.c
deleted file mode 100644 (file)
index 221739e..0000000
--- a/bertos/drv/ser_posix.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2004 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \brief Serial port emulator for hosted environments.
- *
- * \version $Id$
- * \author Bernardo Innocenti <bernie@develer.com>
- */
-
-#include <appconfig.h>
-
-#include <cfg/debug.h>
-#include <cfg/compiler.h>
-
-#include <drv/ser.h>
-#include <drv/ser_p.h>
-
-#include <mware/fifobuf.h>
-
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <fcntl.h> /* open() */
-#include <unistd.h> /* read(), write() */
-
-
-/* From the high-level serial driver */
-extern struct Serial ser_handles[SER_CNT];
-
-/* TX and RX buffers */
-static unsigned char uart0_txbuffer[CONFIG_UART0_TXBUFSIZE];
-static unsigned char uart0_rxbuffer[CONFIG_UART0_RXBUFSIZE];
-static unsigned char uart1_txbuffer[CONFIG_UART1_TXBUFSIZE];
-static unsigned char uart1_rxbuffer[CONFIG_UART1_RXBUFSIZE];
-
-
-/**
- * Internal state structure
- */
-struct EmulSerial
-{
-       struct SerialHardware hw;
-       struct Serial *ser;
-       int fd;
-};
-
-
-/*
- * Callbacks
- */
-static void uart_init(struct SerialHardware *_hw, struct Serial *ser)
-{
-       struct EmulSerial *hw = (struct EmulSerial *)_hw;
-
-       hw->ser = ser;
-       hw->fd = open("/dev/ttyS0", O_RDWR);
-}
-
-static void uart_cleanup(UNUSED_ARG(struct SerialHardware *, _hw))
-{
-       struct EmulSerial *hw = (struct EmulSerial *)_hw;
-
-       close(hw->fd);
-       hw->fd = -1;
-}
-
-static void uart_txStart(struct SerialHardware * _hw)
-{
-       struct EmulSerial *hw = (struct EmulSerial *)_hw;
-
-       while(!fifo_isempty(&hw->ser->txfifo))
-       {
-               char c = fifo_pop(&hw->ser->txfifo);
-               write(hw->fd, &c, 1);
-       }
-}
-
-static bool uart_txSending(UNUSED_ARG(struct SerialHardware *, _hw))
-{
-       return false;
-}
-
-
-static void uart_setBaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
-{
-       TRACEMSG("rate=%lu", rate);
-       // TODO
-
-}
-
-static void uart_setParity(UNUSED_ARG(struct SerialHardware *, _hw), int parity)
-{
-       TRACEMSG("parity=%d", parity);
-       // TODO
-}
-
-// FIXME: move into compiler.h?  Ditch?
-#if COMPILER_C99
-       #define C99INIT(name,val) .name = val
-#elif defined(__GNUC__)
-       #define C99INIT(name,val) name: val
-#else
-       #warning No designated initializers, double check your code
-       #define C99INIT(name,val) (val)
-#endif
-
-/*
- * High-level interface data structures.
- */
-static const struct SerialHardwareVT uart_vtable =
-{
-       C99INIT(init, uart_init),
-       C99INIT(cleanup, uart_cleanup),
-       C99INIT(setBaudrate, uart_setBaudrate),
-       C99INIT(setParity, uart_setParity),
-       C99INIT(txStart, uart_txStart),
-       C99INIT(txSending, uart_txSending),
-};
-
-static struct EmulSerial UARTDescs[SER_CNT] =
-{
-       {
-               C99INIT(hw, /**/) {
-                       C99INIT(table, &uart_vtable),
-                       C99INIT(txbuffer, uart0_txbuffer),
-                       C99INIT(rxbuffer, uart0_rxbuffer),
-                       C99INIT(txbuffer_size, sizeof(uart0_txbuffer)),
-                       C99INIT(rxbuffer_size, sizeof(uart0_rxbuffer)),
-               },
-               C99INIT(ser, NULL),
-               C99INIT(fd, -1),
-       },
-       {
-               C99INIT(hw, /**/) {
-                       C99INIT(table, &uart_vtable),
-                       C99INIT(txbuffer, uart1_txbuffer),
-                       C99INIT(rxbuffer, uart1_rxbuffer),
-                       C99INIT(txbuffer_size, sizeof(uart1_txbuffer)),
-                       C99INIT(rxbuffer_size, sizeof(uart1_rxbuffer)),
-               },
-               C99INIT(ser, NULL),
-               C99INIT(fd, -1),
-       },
-};
-
-struct SerialHardware *ser_hw_getdesc(int unit)
-{
-       ASSERT(unit < SER_CNT);
-       return &UARTDescs[unit].hw;
-}

diff --git a/bertos/emul/ser_posix.c b/bertos/emul/ser_posix.c
new file mode 100644 (file)
index 0000000..221739e
--- /dev/null
+++ b/bertos/emul/ser_posix.c
@@ -0,0 +1,179 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2004 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Serial port emulator for hosted environments.
+ *
+ * \version $Id$
+ * \author Bernardo Innocenti <bernie@develer.com>
+ */
+
+#include <appconfig.h>
+
+#include <cfg/debug.h>
+#include <cfg/compiler.h>
+
+#include <drv/ser.h>
+#include <drv/ser_p.h>
+
+#include <mware/fifobuf.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <fcntl.h> /* open() */
+#include <unistd.h> /* read(), write() */
+
+
+/* From the high-level serial driver */
+extern struct Serial ser_handles[SER_CNT];
+
+/* TX and RX buffers */
+static unsigned char uart0_txbuffer[CONFIG_UART0_TXBUFSIZE];
+static unsigned char uart0_rxbuffer[CONFIG_UART0_RXBUFSIZE];
+static unsigned char uart1_txbuffer[CONFIG_UART1_TXBUFSIZE];
+static unsigned char uart1_rxbuffer[CONFIG_UART1_RXBUFSIZE];
+
+
+/**
+ * Internal state structure
+ */
+struct EmulSerial
+{
+       struct SerialHardware hw;
+       struct Serial *ser;
+       int fd;
+};
+
+
+/*
+ * Callbacks
+ */
+static void uart_init(struct SerialHardware *_hw, struct Serial *ser)
+{
+       struct EmulSerial *hw = (struct EmulSerial *)_hw;
+
+       hw->ser = ser;
+       hw->fd = open("/dev/ttyS0", O_RDWR);
+}
+
+static void uart_cleanup(UNUSED_ARG(struct SerialHardware *, _hw))
+{
+       struct EmulSerial *hw = (struct EmulSerial *)_hw;
+
+       close(hw->fd);
+       hw->fd = -1;
+}
+
+static void uart_txStart(struct SerialHardware * _hw)
+{
+       struct EmulSerial *hw = (struct EmulSerial *)_hw;
+
+       while(!fifo_isempty(&hw->ser->txfifo))
+       {
+               char c = fifo_pop(&hw->ser->txfifo);
+               write(hw->fd, &c, 1);
+       }
+}
+
+static bool uart_txSending(UNUSED_ARG(struct SerialHardware *, _hw))
+{
+       return false;
+}
+
+
+static void uart_setBaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
+{
+       TRACEMSG("rate=%lu", rate);
+       // TODO
+
+}
+
+static void uart_setParity(UNUSED_ARG(struct SerialHardware *, _hw), int parity)
+{
+       TRACEMSG("parity=%d", parity);
+       // TODO
+}
+
+// FIXME: move into compiler.h?  Ditch?
+#if COMPILER_C99
+       #define C99INIT(name,val) .name = val
+#elif defined(__GNUC__)
+       #define C99INIT(name,val) name: val
+#else
+       #warning No designated initializers, double check your code
+       #define C99INIT(name,val) (val)
+#endif
+
+/*
+ * High-level interface data structures.
+ */
+static const struct SerialHardwareVT uart_vtable =
+{
+       C99INIT(init, uart_init),
+       C99INIT(cleanup, uart_cleanup),
+       C99INIT(setBaudrate, uart_setBaudrate),
+       C99INIT(setParity, uart_setParity),
+       C99INIT(txStart, uart_txStart),
+       C99INIT(txSending, uart_txSending),
+};
+
+static struct EmulSerial UARTDescs[SER_CNT] =
+{
+       {
+               C99INIT(hw, /**/) {
+                       C99INIT(table, &uart_vtable),
+                       C99INIT(txbuffer, uart0_txbuffer),
+                       C99INIT(rxbuffer, uart0_rxbuffer),
+                       C99INIT(txbuffer_size, sizeof(uart0_txbuffer)),
+                       C99INIT(rxbuffer_size, sizeof(uart0_rxbuffer)),
+               },
+               C99INIT(ser, NULL),
+               C99INIT(fd, -1),
+       },
+       {
+               C99INIT(hw, /**/) {
+                       C99INIT(table, &uart_vtable),
+                       C99INIT(txbuffer, uart1_txbuffer),
+                       C99INIT(rxbuffer, uart1_rxbuffer),
+                       C99INIT(txbuffer_size, sizeof(uart1_txbuffer)),
+                       C99INIT(rxbuffer_size, sizeof(uart1_rxbuffer)),
+               },
+               C99INIT(ser, NULL),
+               C99INIT(fd, -1),
+       },
+};
+
+struct SerialHardware *ser_hw_getdesc(int unit)
+{
+       ASSERT(unit < SER_CNT);
+       return &UARTDescs[unit].hw;
+}