more work on test suite.

[monkeysphere.git] / tests / basic

diff --git a/tests/basic b/tests/basic
index 4daaf298c50de050f4d83ece248198215cada59e..81f3b91cbf7c53d302163896e09d3039ea0a69aa 100755 (executable)
--- a/tests/basic
+++ b/tests/basic
@@ -12,19 +12,24 @@
 # NOTE: these tests have *not* themselves been tested yet
 # (2008-09-13).  Please exercise with caution!
 
+# fail on fail
+set -e
+
 # these tests assume a commonly-trusted "Admin's key", a fake key
 # permanently stored in ./home/admin/.gnupg:
 gpgadmin() {
     GNUPGHOME="$TESTDIR"/home/admin/.gnupg gpg "$@"
 }
 
-
 # cleanup:
 cleanup() {
+
+    read -p "press enter to cleanup and remove tmp:"
+
     # FIXME: stop the sshd process
 
     echo
-    echo "-- removing temp dir..."
+    echo "### removing temp dir..."
     rm -rf "$TEMPDIR"
 
     # FIXME: how should we clear out the temporary $VARLIB?
@@ -33,7 +38,7 @@ cleanup() {
 }
 
 ## setup trap
-#trap cleanup EXIT
+trap cleanup EXIT
 
 ## set up some variables to ensure that we're operating strictly in
 ## the tests, not system-wide:
@@ -42,6 +47,10 @@ export TESTDIR=$(pwd)
 
 # make temp dir
 TEMPDIR="$TESTDIR"/tmp
+if [ -e "$TEMPDIR" ] ; then
+    echo "tempdir '$TEMPDIR' already exists."
+    exit 1
+fi
 mkdir "$TEMPDIR"
 
 # Use the local copy of executables first, instead of system ones.
@@ -52,25 +61,37 @@ export MONKEYSPHERE_SYSDATADIR="$TEMPDIR"
 export MONKEYSPHERE_SYSCONFIGDIR="$TEMPDIR"
 export MONKEYSPHERE_SYSSHAREDIR="$TESTDIR"/../src
 export MONKEYSPHERE_MONKEYSPHERE_USER="$USER"
+export MONKEYSPHERE_CHECK_KEYSERVER=false
+
+SSHD_CONFIG="$TEMPDIR"/sshd_config
 export SOCKET="$TEMPDIR"/ssh-socket
 
+
 ### SERVER TESTS
 
-# create the temp gnupghome directories
+# setup monkeysphere temp gnupghome directories
 mkdir -p -m 750 "$MONKEYSPHERE_SYSDATADIR"/gnupg-host
 mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication
+cat <<EOF > "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication/gpg.conf
+primary-keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-authentication/pubring.gpg
+keyring ${MONKEYSPHERE_SYSDATADIR}/gnupg-host/pubring.gpg
+EOF
 
 # create a new host key
-echo "-- generating server key..."
-echo | monkeysphere-server gen-key --length 1024 --expire 0
+echo "### generating server key..."
+# add gpg.conf with quick-random
+echo "quick-random" >> "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
+echo | monkeysphere-server gen-key --length 1024 --expire 0 testhost
+# remove the gpg.conf
+rm "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
 
 HOSTKEYID=$( monkeysphere-server show-key | tail -n1 | cut -f3 -d\  )
 
 # certify it with the "Admin's Key".
 # (this would normally be done via keyservers)
-echo "-- certifying server key..."
+echo "### certifying server key..."
 monkeysphere-server gpg-authentication-cmd "--armor --export $HOSTKEYID" | gpgadmin --import
-gpgadmin --sign-key "$HOSTKEYID"
+echo y | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID"
 
 # FIXME: how can we test publish-key without flooding junk into the
 # keyservers?
@@ -78,37 +99,47 @@ gpgadmin --sign-key "$HOSTKEYID"
 # indicate that the "Admin's" key is an identity certifier for the
 # host
 
-echo "-- adding admin as certifier..."
-monkeysphere-server add-identity-certifier "$TESTDIR"/home/admin/.gnupg/pubkey.gpg
+echo "### adding admin as certifier..."
+echo y | monkeysphere-server add-identity-certifier "$TESTDIR"/home/admin/.gnupg/pubkey.gpg
 
+# initialize base sshd_config
+cp etc/ssh/sshd_config "$SSHD_CONFIG"
 # write the sshd_config
-cat <<EOF > "$TEMPDIR"/sshd_config
+cat <<EOF >> "$SSHD_CONFIG"
 HostKey ${MONKEYSPHERE_SYSDATADIR}/ssh_host_rsa_key
+AuthorizedKeysFile ${MONKEYSPHERE_SYSDATADIR}/authorized_keys/%u
 EOF
 
-# launch sshd with the new host key.
-echo "-- starting sshd..."
-mkfifo "$SOCKET"
-/usr/sbin/sshd -f "$TEMPDIR"/sshd_config -i <>"$SOCKET"
+# launch test sshd with the new host key.
+echo "### starting sshd..."
+socat EXEC:"/usr/sbin/sshd -f ${SSHD_CONFIG} -i -d -d -d -D -e" "UNIX-LISTEN:${SOCKET}" 2> "$TEMPDIR"/sshd.log &
 
 
 ### TESTUSER TESTS
 
 # copy testuser home directory into temp dir
+echo "### seting up testuser home..."
 cp -r "$TESTDIR"/home/testuser "$TEMPDIR"/
 
 # generate an auth subkey for the test user
-echo "-- generating key for testuser..."
+echo "### generating key for testuser..."
 MONKEYSPHERE_GNUPGHOME="$TEMPDIR"/testuser/.gnupg \
     monkeysphere gen-subkey --expire 0
 
-# connect to sample sshd host key, using monkeysphere to verify the
-# identity before connection.
+# add server key to testuser keychain
+echo "### export server key to testuser..."
+gpgadmin --armor --export "$HOSTKEYID" | \
+    GNUPGHOME="$TEMPDIR"/testuser/.gnupg gpg --import
 
-## FIXME: implement!
+#GNUPGHOME="$TEMPDIR"/testuser/.gnupg gpg --list-keys
+#read -p "?"
+
+# connect to test sshd, using monkeysphere to verify the identity
+# before connection.
+echo "### testuser connecting to sshd socket..."
+PROXY_COMMAND="monkeysphere-ssh-proxycommand --no-connect %h && socat STDIO UNIX:${SOCKET}"
+GNUPGHOME="$TEMPDIR"/testuser/.gnupg ssh -oProxyCommand="$PROXY_COMMAND" testhost
 
 # create a new client side key, certify it with the "CA", use it to
 # log in.
-
 ## FIXME: implement!
-