sam3 ethernet: remove kludge to fix early sam3x-ek ethernet.

[bertos.git] / bertos / cpu / cortex-m3 / drv / eth_sam3.h

diff --git a/bertos/cpu/cortex-m3/drv/eth_sam3.h b/bertos/cpu/cortex-m3/drv/eth_sam3.h
index bd5e6f32bc2c10947c4c8b2ea79b741580d485c2..7ed89bd57feb4ee3f181e05976c1f7ecc8dd1faa 100644 (file)
--- a/bertos/cpu/cortex-m3/drv/eth_sam3.h
+++ b/bertos/cpu/cortex-m3/drv/eth_sam3.h
@@ -44,7 +44,7 @@
 // \{
 #define NIC_PHY_ADDR            0
 
-//Registry definition
+// Register bits definition
 #define NIC_PHY_BMCR            0x00    //  Basic mode control register.
 #define NIC_PHY_BMCR_COLTEST    0x0080  //  Collision test.
 #define NIC_PHY_BMCR_FDUPLEX    0x0100  //  Full duplex mode.
@@ -61,6 +61,11 @@
 #define NIC_PHY_BMSR_ANEGCAPABLE 0x0008  // Able to do auto-negotiation
 #define NIC_PHY_BMSR_LINKSTAT   0x0004  //  Link status.
 
+#define NIC_PHY_ANLPAR_10_HDX   BV(5)   //  10BASE-T half duplex
+#define NIC_PHY_ANLPAR_10_FDX   BV(6)   //  10BASE-T full duplex
+#define NIC_PHY_ANLPAR_TX_HDX   BV(7)   //  100BASE-TX half duplex
+#define NIC_PHY_ANLPAR_TX_FDX   BV(8)   //  100BASE-TX full duplex
+
 #define NIC_PHY_ID1             0x02    //  PHY identifier register 1.
 #define NIC_PHY_ID2             0x03    //  PHY identifier register 2.
 #define NIC_PHY_ANAR            0x04    //  Auto negotiation advertisement register.
@@ -74,7 +79,6 @@
  * See schematics for AT91SAM7X-EK evalution board.
  */
 // All pins in port B
-#define PHY_TXCLK_ISOLATE_BIT   0
 #define PHY_REFCLK_XT2_BIT      0
 #define PHY_TXEN_BIT            1
 #define PHY_TXD0_BIT            2
@@ -123,22 +127,18 @@
  * See schematics for SAM3X-EK evalution board.
  */
 // Port B
-#define PHY_TXCLK_ISOLATE_BIT   0
 #define PHY_REFCLK_XT2_BIT      0
 #define PHY_TXEN_BIT            1
 #define PHY_TXD0_BIT            2
 #define PHY_TXD1_BIT            3
+#define PHY_RXDV_TESTMODE_BIT   4
 #define PHY_RXD0_AD0_BIT        5
 #define PHY_RXD1_AD1_BIT        6
 #define PHY_RXER_RXD4_RPTR_BIT  7
 #define PHY_MDC_BIT             8
 #define PHY_MDIO_BIT            9
-// Port C
-#define PHY_RXDV_TESTMODE_BIT   10
 // Port A
 #define PHY_MDINTR_BIT          5
-// Port D -- FIXME: Only on which revision?
-#define PHY_PWRDN_BIT           18
 
 #define PHY_MII_PINS_PORTB \
        BV(PHY_REFCLK_XT2_BIT) \
@@ -151,9 +151,6 @@
        | BV(PHY_MDC_BIT) \
        | BV(PHY_MDIO_BIT)
 
-#define PHY_MII_PINS_PORTC \
-       BV(PHY_RXDV_TESTMODE_BIT)
-
 #endif /* CPU_ARM_AT91 */
 // \}