--- /dev/null
+#
+# Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+# All rights reserved.
+#
+# Author: Lorenzo Berni <duplo@develer.com>
+#
+
+# Set to 1 for verbose build output, 0 for terse output
+V := 0
+
+default: all
+
+include bertos/config.mk
+
+include rmslog/rmslog.mk
+
+include bertos/rules.mk
--- /dev/null
+BeRTOS 2.6.99 [local copy]
--- /dev/null
+/home/bernie/src/develer/bertos/bertos
\ No newline at end of file
--- /dev/null
+#define VERS_BUILD 2
+#define VERS_HOST "giskard.codewiz.org"
--- /dev/null
+(dp0
+S'BERTOS_PATH'
+p1
+S'.'
+p2
+sS'SELECTED_FREQ'
+p3
+V16000000
+p4
+sS'WIZARD_VERSION'
+p5
+I4
+sS'PROJECT_NAME'
+p6
+Vrmslog
+p7
+sS'TOOLCHAIN'
+p8
+(dp9
+S'path'
+p10
+V/usr/bin/avr-gcc
+p11
+ssS'PROJECT_HW_PATH_FROM_MAKEFILE'
+p12
+g7
+sS'ENABLED_MODULES'
+p13
+(lp14
+S'signal'
+p15
+aS'debug'
+p16
+aS'kernel'
+p17
+aS'ser'
+p18
+aS'kfile'
+p19
+aS'monitor'
+p20
+aS'timer'
+p21
+aS'formatwr'
+p22
+aS'semaphores'
+p23
+aS'heap'
+p24
+asS'CPU_NAME'
+p25
+VATmega328P
+p26
+sS'PROJECT_HW_PATH'
+p27
+Vrmslog
+p28
+sS'PROJECT_SRC_PATH'
+p29
+Vrmslog
+p30
+sS'PRESET'
+p31
+NsS'PROJECT_SRC_PATH_FROM_MAKEFILE'
+p32
+g7
+sS'OUTPUT'
+p33
+(lp34
+s.
\ No newline at end of file
--- /dev/null
+name = 'kernel preset'
+advanced = True
+description="""
+<p>
+This is a minimalist kernel project: it just initializes the hardware and
+creates an independent process to blink an LED, while the main loop
+continues to monitor the stack utilization of all the processes.
+</p>
+"""
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the ADC module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_ADC_H
+#define CFG_ADC_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define ADC_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define ADC_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Clock Frequency for ADC conversion.
+ * This frequency will be rounded down to an integer
+ * submultiple of CPU_FREQ.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "at91"
+ * $WIZ$ max = 5000000
+ */
+#define CONFIG_ADC_CLOCK 4800000UL
+
+/**
+ * Minimum time for starting up a conversion [us].
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 20
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_ADC_STARTUP_TIME 20
+
+/**
+ * Minimum time for sample and hold [ns].
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 600
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_ADC_SHTIME 834
+
+/**
+ * ADC Voltage Reference.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "avr_adc_refs"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_ADC_AVR_REF ADC_AVR_AVCC
+
+/**
+ * ADC clock divisor from main crystal.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ max = 128
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_ADC_AVR_DIVISOR 2
+
+/**
+ * Enable ADC strobe for debugging ADC ISR.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_ADC_STROBE 0
+
+#endif /* CFG_ADC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for AFSK1200 modem.
+ *
+ * \author Francesco Sacchi <asterix@develer.com>
+ */
+
+#ifndef CFG_AFSK_H
+#define CFG_AFSK_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define AFSK_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define AFSK_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * AFSK discriminator filter type.
+ *
+ * $WIZ$ type = "enum"; value_list = "afsk_filter_list"
+ */
+#define CONFIG_AFSK_FILTER AFSK_CHEBYSHEV
+
+
+/**
+ * AFSK receiver buffer length.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_AFSK_RX_BUFLEN 32
+
+/**
+ * AFSK transimtter buffer length.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_AFSK_TX_BUFLEN 32
+
+/**
+ * AFSK DAC sample rate for modem outout.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2400
+ */
+#define CONFIG_AFSK_DAC_SAMPLERATE 9600
+
+/**
+ * AFSK RX timeout in ms, set to -1 to disable.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
+#define CONFIG_AFSK_RXTIMEOUT 0
+
+
+/**
+ * AFSK Preamble length in [ms], before starting transmissions.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_AFSK_PREAMBLE_LEN 300UL
+
+
+
+/**
+ * AFSK Trailer length in [ms], before stopping transmissions.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_AFSK_TRAILER_LEN 50UL
+
+#endif /* CFG_AFSK_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the AX25 protocol module.
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef CFG_AX25_H
+#define CFG_AX25_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define AX25_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define AX25_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * AX25 frame buffer lenght.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 18
+ */
+#define CONFIG_AX25_FRAME_BUF_LEN 330
+
+
+/**
+ * Enable repeaters listing in AX25 frames.
+ * If enabled use 56 addtional bytes of RAM
+ * for each message received.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_AX25_RPT_LST 1
+
+#endif /* CFG_AX25_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for BattFS module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_BATTFS_H
+#define CFG_BATTFS_H
+
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define BATTFS_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define BATTFS_LOG_FORMAT LOG_FMT_VERBOSE
+
+/**
+ * Set to 1 to enable free page shuffling.
+ * This increase memories life but makes debugging
+ * more difficult due to its unrepeteable state.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_BATTFS_SHUFFLE_FREE_PAGES 0
+
+
+#endif /* BATTFS */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the context switch benchmark.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_CONTEXT_SWITCH_H
+#define CFG_CONTEXT_SWITCH_H
+
+/**
+ * Use hp timer for the bechmark.
+ *
+ * $WIZ$ type = "boolean"
+ * $WIZ$ module= "boolean"
+ * $WIZ$ conditional_deps = "ser"
+ */
+#define CONFIG_USE_HP_TIMER 1
+
+
+/**
+ * Use board led for benchmark.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_USE_LED 1
+
+
+/**
+ * Debug console port.
+ * $WIZ$ type = "int"; min = 0
+ */
+#define CONFIG_CTX_DEBUG_PORT 0
+
+/**
+ * Baudrate for the debug console.
+ * $WIZ$ type = "int"; min = 300
+ */
+#define CONFIG_CTX_DEBUG_BAUDRATE 115200UL
+
+#endif /* CFG_CONTEXT_SWITCH_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for data flash memory module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DATAFLASH_H
+#define CFG_DATAFLASH_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DATAFLASH_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DATAFLASH_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_DATAFLASH_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for DC motor module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DC_MOTOR_H
+#define CFG_DC_MOTOR_H
+
+/**
+ * Number of the DC motors to manage.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_NUM_DC_MOTOR 4
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define DC_MOTOR_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define DC_MOTOR_LOG_FORMAT LOG_FMT_VERBOSE
+
+
+/**
+ * Min value of DC motor speed.
+ * \note Generally this value is the min value of the ADC conversion,
+ * if you use it.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_DC_MOTOR_MIN_SPEED 0
+
+
+/**
+ * Max value of DC motor speed.
+ * \note Generally this value is the max value of the ADC conversion,
+ * if you use it.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ max = 65535
+ */
+#define CONFIG_DC_MOTOR_MAX_SPEED 65535
+
+
+/**
+ * Sampling period in millisecond.
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_DC_MOTOR_SAMPLE_PERIOD 40
+
+/**
+ * Amount of millisecond before to read sample.
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_DC_MOTOR_SAMPLE_DELAY 2
+
+/**
+ * This control set which mode the driver use to lock share
+ * resources when we use the preempitive kernel.
+ * If we set to 1 we use the semaphore module otherwise the
+ * driver disable the switch context every time we need to access
+ * to shared sources.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_DC_MOTOR_USE_SEM 1
+
+#endif /* CFG_DC_MOTOR_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for Debug module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_DEBUG_H
+#define CFG_DEBUG_H
+
+/**
+ * Debug console port.
+ * $WIZ$ type = "int"; min = 0
+ */
+#define CONFIG_KDEBUG_PORT 0
+
+/**
+ * Baudrate for the debug console.
+ * $WIZ$ type = "int"; min = 300
+ */
+#define CONFIG_KDEBUG_BAUDRATE 115200UL
+
+/**
+ * Clock source for the UART module. You need to write the code to reprogram the respective clock at the required frequency in your project before calling kdbg_init().
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "kdbg_clk_src"
+ * $WIZ$ supports = "msp430"
+ */
+#define CONFIG_KDEBUG_CLOCK_SOURCE KDBG_UART_SMCLK
+
+/**
+ * Clock frequency. (Only if different from MCLK's frequency, otherwise leave it zero)
+ * $WIZ$ type = "int"; min = 0
+ * $WIZ$ supports = "msp430"
+ */
+#define CONFIG_KDEBUG_CLOCK_FREQ 0UL
+
+#endif /* CFG_DEBUG_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the Eeprom module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_EEPROM_H
+#define CFG_EEPROM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define EEPROM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define EEPROM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Check this to disable Eeprom deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_EEPROM_DISABLE_OLD_API 0
+
+#endif /* CFG_EEPROM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ *
+ * \brief Configuration file for embedded flash module.
+ */
+
+#ifndef CFG_EMB_FLASH_H
+#define CFG_EMB_FLASH_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_FLASH_EMB_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_FLASH_EMB_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Write emb flash timeout.
+ * For how many milliseconds the cpu wait
+ * to complete write operation.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_FLASH_WR_TIMEOUT 100
+
+/**
+ * Check this to disable embedded flash deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FLASH_DISABLE_OLD_API 0
+
+#endif /* CFG_FLASH_AT91_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the generic ethernet driver module
+ */
+
+#ifndef CFG_ETH_H
+#define CFG_ETH_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define ETH_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define ETH_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_ETH_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for Fat module.
+ *
+ *
+ * \author Luca Ottaviano <lottaviano@develer.com>
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef CFG_FAT_H
+#define CFG_FAT_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define FAT_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define FAT_LOG_FORMAT LOG_FMT_VERBOSE
+
+
+/**
+ * Use word alignment to access FAT structure.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_WORD_ACCESS 0
+#define _WORD_ACCESS CONFIG_FAT_WORD_ACCESS
+
+/**
+ * Enable read functions only.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_FS_READONLY 0
+#define _FS_READONLY CONFIG_FAT_FS_READONLY
+
+/**
+ * Minimization level to remove some functions.
+ * $WIZ$ type = "int"; min = 0; max = 3
+ */
+#define CONFIG_FAT_FS_MINIMIZE 0
+#define _FS_MINIMIZE CONFIG_FAT_FS_MINIMIZE
+
+/**
+ * If enabled, this reduces memory consumption 512 bytes each file object by using a shared buffer.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_FS_TINY 1
+#define _FS_TINY CONFIG_FAT_FS_TINY
+
+/**
+ * To enable string functions, set _USE_STRFUNC to 1 or 2.
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "False"
+ */
+#define CONFIG_FAT_USE_STRFUNC 0
+#define _USE_STRFUNC CONFIG_FAT_USE_STRFUNC
+
+/**
+ * Enable f_mkfs function. Requires CONFIG_FAT_FS_READONLY = 0.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_USE_MKFS 0
+#define _USE_MKFS (CONFIG_FAT_USE_MKFS && !CONFIG_FAT_FS_READONLY)
+
+/**
+ * Enable f_forward function. Requires CONFIG_FAT_FS_TINY.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_USE_FORWARD 0
+#define _USE_FORWARD (CONFIG_FAT_USE_FORWARD && CONFIG_FAT_FS_TINY)
+
+/**
+ * Number of volumes (logical drives) to be used.
+ * $WIZ$ type = "int"; min = 1; max = 255
+ */
+#define CONFIG_FAT_DRIVES 1
+#define _DRIVES CONFIG_FAT_DRIVES
+
+/**
+ * Maximum sector size to be handled. (512/1024/2048/4096).
+ * 512 for memory card and hard disk, 1024 for floppy disk, 2048 for MO disk
+ * $WIZ$ type = "int"; min = 512; max = 4096
+ */
+#define CONFIG_FAT_MAX_SS 512
+#define _MAX_SS CONFIG_FAT_MAX_SS
+
+/**
+ * When _MULTI_PARTITION is set to 0, each volume is bound to the same physical
+ * drive number and can mount only first primaly partition. When it is set to 1,
+ * each volume is tied to the partitions listed in Drives[].
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
+#define CONFIG_FAT_MULTI_PARTITION 0
+#define _MULTI_PARTITION CONFIG_FAT_MULTI_PARTITION
+
+/**
+ * Specifies the OEM code page to be used on the target system.
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_FAT_CODE_PAGE 850
+#define _CODE_PAGE CONFIG_FAT_CODE_PAGE
+
+/**
+ * Support for long filenames. Enable only if you have a valid Microsoft license.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_FAT_USE_LFN 0
+#define _USE_LFN CONFIG_FAT_USE_LFN
+
+/**
+ * Maximum Long File Name length to handle.
+ * $WIZ$ type = "int"; min = 8; max = 255
+ */
+#define CONFIG_FAT_MAX_LFN 255
+#define _MAX_LFN CONFIG_FAT_MAX_LFN
+
+#endif /* CFG_FAT_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for flash25 module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_FLASH25_H
+#define CFG_FLASH25_H
+
+/**
+ * Eeprom memory type.
+ *
+ *$WIZ$ type = "enum"
+ *$WIZ$ value_list = "flash25_list"
+ */
+#define CONFIG_FLASH25 FLASH25_AT25F2048
+
+#endif /* CFG_FALSH25_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for formatted write module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_FORMATWR_H
+#define CFG_FORMATWR_H
+
+/**
+ * printf()-style formatter configuration.
+ * $WIZ$ type = "enum"; value_list = "printf_list"
+ *
+ * \sa PRINTF_DISABLED
+ * \sa PRINTF_NOMODIFIERS
+ * \sa PRINTF_REDUCED
+ * \sa PRINTF_NOFLOAT
+ * \sa PRINTF_FULL
+ */
+#define CONFIG_PRINTF PRINTF_FULL
+
+/**
+ * Size of buffer to format "%" sequences in printf.
+ *
+ * Warning: no check on buffer size is done when formatting, be careful especially
+ * with big numbers and %f formatting.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 4
+ */
+#define CONFIG_FRMWRI_BUFSIZE 134
+
+#endif /* CFG_FORMATWR_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for GFX module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_GFX_H
+#define CFG_GFX_H
+
+/**
+ * Enable line clipping algorithm.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_GFX_CLIPPING 1
+
+/**
+ * Enable text rendering in bitmaps.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_GFX_TEXT 1
+
+/**
+ * Enable virtual coordinate system.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_GFX_VCOORDS 1
+
+/**
+ * Select bitmap pixel format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "bitmap_format"
+ */
+#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
+
+#endif /* CFG_GFX_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for hashtable module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HASHTABLE_H
+#define CFG_HASHTABLE_H
+
+/**
+ * Enable/disable support to declare special hash tables which maintain a copy of the key internally instead of relying on the hook to extract it from the data.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_HT_OPTIONAL_INTERNAL_KEY 1
+
+#endif /* CFG_HASHTABLE_H */
+
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for heap module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_HEAP_H
+#define CFG_HEAP_H
+
+/**
+ * Enable malloc/free like API.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_HEAP_MALLOC 1
+
+#endif /* CFG_HEAP_H */
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for I2C module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_I2C_H
+#define CFG_I2C_H
+
+/**
+*Comunication frequency.
+*
+* $WIZ$ type = "int"
+*/
+#define CONFIG_I2C_FREQ 100000UL
+
+/**
+ * I2C start timeout.
+ * For how many milliseconds the i2c_start
+ * should try to get an ACK before
+ * returning error.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_I2C_START_TIMEOUT 100
+
+/**
+ * Check this to disable I2c deprecated API support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_I2C_DISABLE_OLD_API 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2C_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2C_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_I2C_H */
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for I2S module.
+ *
+ *
+ * \author Luca Ottaviano <lottaviano@develer.com>
+ */
+
+#ifndef CFG_I2S_H
+#define CFG_I2S_H
+
+/**
+ * Length of each play buffer.
+ *
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_PLAY_BUF_LEN 8192
+
+/**
+ * Sampling frequency of the audio file.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 32000
+ * $WIZ$ max = 192000
+ */
+#define CONFIG_SAMPLE_FREQ 44100UL
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define I2S_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define I2S_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_I2S_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for ini reader module.
+ *
+ *
+ * \author Luca Ottaviano <lottaviano@develer.com>
+ */
+
+#ifndef CFG_INI_READER_H
+#define CFG_INI_READER_H
+
+/**
+ * Maximum ini file line length (chars).
+ * $WIZ$ type = "int"; min = 1
+ */
+#define CONFIG_INI_MAX_LINE_LEN 64
+
+#endif /* CFG_INI_READER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for keyboard module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_KBD_H
+#define CFG_KBD_H
+
+/// Keyboard polling method. $WIZ$ supports = "False"
+#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
+
+/// Enable keyboard event delivery to observers. $WIZ$ type = "boolean"
+#define CONFIG_KBD_OBSERVER 0
+
+/// Enable key beeps. $WIZ$ type = "boolean"
+#define CONFIG_KBD_BEEP 0
+
+/// Enable long pression handler for keys. $WIZ$ type = "boolean"
+#define CONFIG_KBD_LONGPRESS 0
+
+/// Enable calling poor man's scheduler to be called inside kbd_peek. $WIZ$ type = "boolean"
+#define CONFIG_KBD_SCHED 0
+
+#endif /* CFG_KBD_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for keytag module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_KEYTAG_H
+#define CFG_KEYTAG_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_KEYTAG_LOG_LEVEL LOG_LVL_ERR
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_KEYTAG_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Max buffer lenght
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_TAG_MAX_LEN 14U
+
+#endif /* CFG_KEYTAG_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for KFile interface module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_KFILE_H
+#define CFG_KFILE_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define KFILE_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define KFILE_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Enable the gets function with echo.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KFILE_GETS 0
+
+#endif /* CFG_KFILE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2010 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
+ *
+ * -->
+ *
+ * \brief Displaytech 32122A LCD driver configuration file.
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ */
+#ifndef CFG_LCD_32122A_H
+#define CFG_LCD_32122A_H
+
+/**
+ * Enable soft interrupt to refresh the LCD.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LCD_SOFTINT_REFRESH 0
+
+/**
+ * Enable wait macro when display is busy.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LCD_WAIT 0
+
+/**
+ * Display refresh time 32122a.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_LCD_REFRESH 100
+
+#endif /* CFG_LCD_32122A_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for lcd display module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_LCD_H
+#define CFG_LCD_H
+
+/**
+ * Use 4 bit addressing mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LCD_4BIT 0
+
+/**
+ * Use a table to speed up LCD memory addressing.
+ * This will use about 100 bytes of RAM.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_LCD_ADDRESS_FAST 1
+
+/**
+ * Number of columns in LCD display.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "lcd_hd44_cols"
+ */
+#define CONFIG_LCD_COLS LCD_HD44_COLS_16
+
+/**
+ * Number of rows in LCD display.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "lcd_hd44_rows"
+ */
+#define CONFIG_LCD_ROWS LCD_HD44_ROWS_2
+
+#endif /* CFG_LCD_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the LM75 sensor temperature.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_LM75_H
+#define CFG_LM75_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define LM75_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define LM75_LOG_FORMAT LOG_FMT_TERSE
+
+#endif /* CFG_AX25_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the lwIP TCP/IP stack module
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ *
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef CFG_LWIP_H
+#define CFG_LWIP_H
+
+/*
+ -----------------------------------------------
+ ---------- Platform specific locking ----------
+ -----------------------------------------------
+*/
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#ifndef SYS_LIGHTWEIGHT_PROT
+#define SYS_LIGHTWEIGHT_PROT 1
+#endif
+
+/**
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#ifndef NO_SYS
+#define NO_SYS 0
+#endif
+
+/**
+ * MEMCPY: override this if you have a faster implementation at hand than the
+ * one included in your C library
+ */
+#ifndef MEMCPY
+#define MEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/**
+ * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
+ * call to memcpy() if the length is known at compile time and is small.
+ */
+#ifndef SMEMCPY
+#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
+#endif
+
+/*
+ ------------------------------------
+ ---------- Memory options ----------
+ ------------------------------------
+*/
+/**
+ * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
+ * instead of the lwip internal allocator. Can save code size if you
+ * already use it.
+ */
+#ifndef MEM_LIBC_MALLOC
+#define MEM_LIBC_MALLOC 0
+#endif
+
+/**
+ * Use mem_malloc/mem_free instead of the lwip pool allocator.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#ifndef MEMP_MEM_MALLOC
+#define MEMP_MEM_MALLOC 0
+#endif
+
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ * \verbatim
+ * 4 byte alignment -> #define MEM_ALIGNMENT 4
+ * 2 byte alignment -> #define MEM_ALIGNMENT 2
+ * \endverbatim
+ */
+#ifndef MEM_ALIGNMENT
+#define MEM_ALIGNMENT 4
+#endif
+
+/**
+ * The size of the lwIP heap memory.
+ *
+ * If the application will send a lot of data that needs to be copied, this
+ * should be set high.
+ *
+ * $WIZ$ type = "int"; min = 1600
+ */
+#define MEM_SIZE 1600
+
+/**
+ * Dynamic pool memory overflow protection check level.
+ *
+ * MEMP_OVERFLOW_CHECK == 0 no checking
+ * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
+ * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
+ * memp_malloc() or memp_free() is called (useful but slow!)
+ *
+ * $WIZ$ type = "int"; min = "0"; max = "2"
+ */
+#define MEMP_OVERFLOW_CHECK 0
+
+/**
+ * Run a sanity check after each memp_free().
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define MEMP_SANITY_CHECK 0
+
+/**
+ * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
+ * of memory pools of various sizes. When mem_malloc is called, an element of
+ * the smallest pool that can provide the length needed is returned.
+ * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
+ */
+#ifndef MEM_USE_POOLS
+#define MEM_USE_POOLS 0
+#endif
+
+/**
+ * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
+ * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
+ * reliable. */
+#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
+#define MEM_USE_POOLS_TRY_BIGGER_POOL 0
+#endif
+
+/**
+ * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
+ * that defines additional pools beyond the "standard" ones required
+ * by lwIP. If you set this to 1, you must have lwippools.h in your
+ * inlude path somewhere.
+ */
+#ifndef MEMP_USE_CUSTOM_POOLS
+#define MEMP_USE_CUSTOM_POOLS 0
+#endif
+
+/**
+ * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
+ * interrupt context (or another context that doesn't allow waiting for a
+ * semaphore).
+ * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
+ * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
+ * with each loop so that mem_free can run.
+ *
+ * ATTENTION: As you can see from the above description, this leads to dis-/
+ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
+ * can need longer.
+ *
+ * If you don't want that, at least for NO_SYS=0, you can still use the following
+ * functions to enqueue a deallocation call which then runs in the tcpip_thread
+ * context:
+ * - pbuf_free_callback(p);
+ * - mem_free_callback(m);
+ */
+#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
+#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Internal Memory Pool Sizes ----------
+ ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#ifndef MEMP_NUM_PBUF
+#define MEMP_NUM_PBUF 16
+#endif
+
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#ifndef MEMP_NUM_RAW_PCB
+#define MEMP_NUM_RAW_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#ifndef MEMP_NUM_UDP_PCB
+#define MEMP_NUM_UDP_PCB 4
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB
+#define MEMP_NUM_TCP_PCB 5
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB_LISTEN
+#define MEMP_NUM_TCP_PCB_LISTEN 8
+#endif
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_SEG
+#define MEMP_NUM_TCP_SEG 16
+#endif
+
+/**
+ * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for
+ * reassembly (whole packets, not fragments!)
+ */
+#ifndef MEMP_NUM_REASSDATA
+#define MEMP_NUM_REASSDATA 5
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#ifndef MEMP_NUM_ARP_QUEUE
+#define MEMP_NUM_ARP_QUEUE 30
+#endif
+
+/**
+ * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
+ * can be members et the same time (one per netif - allsystems group -, plus one
+ * per netif membership).
+ * (requires the LWIP_IGMP option)
+ */
+#ifndef MEMP_NUM_IGMP_GROUP
+#define MEMP_NUM_IGMP_GROUP 8
+#endif
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ */
+#ifndef MEMP_NUM_SYS_TIMEOUT
+#define MEMP_NUM_SYS_TIMEOUT 8
+#endif
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETBUF
+#define MEMP_NUM_NETBUF 2
+#endif
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETCONN
+#define MEMP_NUM_NETCONN 4
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_API
+#define MEMP_NUM_TCPIP_MSG_API 8
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets.
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_INPKT
+#define MEMP_NUM_TCPIP_MSG_INPKT 8
+#endif
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
+ */
+#ifndef PBUF_POOL_SIZE
+#define PBUF_POOL_SIZE 16
+#endif
+
+/*
+ ---------------------------------
+ ---------- ARP options ----------
+ ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#ifndef LWIP_ARP
+#define LWIP_ARP 1
+#endif
+
+/**
+ * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
+ */
+#ifndef ARP_TABLE_SIZE
+#define ARP_TABLE_SIZE 10
+#endif
+
+/**
+ * ARP_QUEUEING==1: Outgoing packets are queued during hardware address
+ * resolution.
+ */
+#ifndef ARP_QUEUEING
+#define ARP_QUEUEING 1
+#endif
+
+/**
+ * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
+ * updated with the source MAC and IP addresses supplied in the packet.
+ * You may want to disable this if you do not trust LAN peers to have the
+ * correct addresses, or as a limited approach to attempt to handle
+ * spoofing. If disabled, lwIP will need to make a new ARP request if
+ * the peer is not already in the ARP table, adding a little latency.
+ */
+#ifndef ETHARP_TRUST_IP_MAC
+#define ETHARP_TRUST_IP_MAC 1
+#endif
+
+/**
+ * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
+ * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
+ * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
+ * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
+ */
+#ifndef ETHARP_SUPPORT_VLAN
+#define ETHARP_SUPPORT_VLAN 0
+#endif
+
+/*
+ --------------------------------
+ ---------- IP options ----------
+ --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#ifndef IP_FORWARD
+#define IP_FORWARD 0
+#endif
+
+/**
+ * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
+ * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
+ * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
+ */
+#ifndef IP_OPTIONS_ALLOWED
+#define IP_OPTIONS_ALLOWED 1
+#endif
+
+/**
+ * Reassemble incoming fragmented IP packets.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_REASSEMBLY 1
+
+/**
+ * Fragment outgoing IP packets if their size exceeds MTU.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define IP_FRAG 1
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#ifndef IP_REASS_MAXAGE
+#define IP_REASS_MAXAGE 3
+#endif
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#ifndef IP_REASS_MAX_PBUFS
+#define IP_REASS_MAX_PBUFS 10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented.
+ */
+#ifndef IP_FRAG_USES_STATIC_BUF
+#define IP_FRAG_USES_STATIC_BUF 1
+#endif
+
+/**
+ * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
+ * (requires IP_FRAG_USES_STATIC_BUF==1)
+ */
+#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
+#define IP_FRAG_MAX_MTU 1500
+#endif
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#ifndef IP_DEFAULT_TTL
+#define IP_DEFAULT_TTL 255
+#endif
+
+/**
+ * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
+ * filter per pcb on udp and raw send operations. To enable broadcast filter
+ * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
+ */
+#ifndef IP_SOF_BROADCAST
+#define IP_SOF_BROADCAST 0
+#endif
+
+/**
+ * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
+ * filter on recv operations.
+ */
+#ifndef IP_SOF_BROADCAST_RECV
+#define IP_SOF_BROADCAST_RECV 0
+#endif
+
+/*
+ ----------------------------------
+ ---------- ICMP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable ICMP module inside the IP stack.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_ICMP 1
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#ifndef ICMP_TTL
+#define ICMP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
+ */
+#ifndef LWIP_BROADCAST_PING
+#define LWIP_BROADCAST_PING 0
+#endif
+
+/**
+ * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
+ */
+#ifndef LWIP_MULTICAST_PING
+#define LWIP_MULTICAST_PING 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- RAW options ----------
+ ---------------------------------
+*/
+/**
+ * Enable application layer to hook into the IP layer itself.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_RAW 1
+
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef RAW_TTL
+#define RAW_TTL (IP_DEFAULT_TTL)
+#endif
+
+/*
+ ----------------------------------
+ ---------- DHCP options ----------
+ ----------------------------------
+*/
+/**
+ * Enable DHCP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DHCP 1
+
+/**
+ * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
+ */
+#ifndef DHCP_DOES_ARP_CHECK
+#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP))
+#endif
+
+/*
+ ------------------------------------
+ ---------- AUTOIP options ----------
+ ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#ifndef LWIP_AUTOIP
+#define LWIP_AUTOIP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
+ * the same interface at the same time.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP
+#define LWIP_DHCP_AUTOIP_COOP 0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
+ * that should be sent before falling back on AUTOIP. This can be set
+ * as low as 1 to get an AutoIP address very quickly, but you should
+ * be prepared to handle a changing IP address when DHCP overrides
+ * AutoIP.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
+#define LWIP_DHCP_AUTOIP_COOP_TRIES 9
+#endif
+
+/*
+ ----------------------------------
+ ---------- SNMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on SNMP module. UDP must be also available.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SNMP 0
+
+/**
+ * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
+ * allow. At least one request buffer is required.
+ */
+#ifndef SNMP_CONCURRENT_REQUESTS
+#define SNMP_CONCURRENT_REQUESTS 1
+#endif
+
+/**
+ * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
+ * destination is required
+ */
+#ifndef SNMP_TRAP_DESTINATIONS
+#define SNMP_TRAP_DESTINATIONS 1
+#endif
+
+/**
+ * SNMP_PRIVATE_MIB:
+ */
+#ifndef SNMP_PRIVATE_MIB
+#define SNMP_PRIVATE_MIB 0
+#endif
+
+/**
+ * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
+ * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
+ * Unsafe requests are disabled by default!
+ */
+#ifndef SNMP_SAFE_REQUESTS
+#define SNMP_SAFE_REQUESTS 1
+#endif
+
+/*
+ ----------------------------------
+ ---------- IGMP options ----------
+ ----------------------------------
+*/
+/**
+ * Turn on IGMP module.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_IGMP 0
+
+/*
+ ----------------------------------
+ ---------- DNS options -----------
+ ----------------------------------
+*/
+/**
+ * Turn on DNS module. UDP must be available for DNS transport.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_DNS 0
+
+/** DNS maximum number of entries to maintain locally. */
+#ifndef DNS_TABLE_SIZE
+#define DNS_TABLE_SIZE 4
+#endif
+
+/** DNS maximum host name length supported in the name table. */
+#ifndef DNS_MAX_NAME_LENGTH
+#define DNS_MAX_NAME_LENGTH 256
+#endif
+
+/** The maximum of DNS servers */
+#ifndef DNS_MAX_SERVERS
+#define DNS_MAX_SERVERS 2
+#endif
+
+/** DNS do a name checking between the query and the response. */
+#ifndef DNS_DOES_NAME_CHECK
+#define DNS_DOES_NAME_CHECK 1
+#endif
+
+/** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if
+ DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2.
+ The buffer will be of size DNS_MSG_SIZE */
+#ifndef DNS_USES_STATIC_BUF
+#define DNS_USES_STATIC_BUF 1
+#endif
+
+/** DNS message max. size. Default value is RFC compliant. */
+#ifndef DNS_MSG_SIZE
+#define DNS_MSG_SIZE 512
+#endif
+
+/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
+ * you have to define
+ * \code
+ * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ * \endcode
+ * (an array of structs name/address, where address is an u32_t in network
+ * byte order).
+ *
+ * Instead, you can also use an external function:
+ * \code
+ * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ * \endcode
+ * that returns the IP address or INADDR_NONE if not found.
+ */
+#ifndef DNS_LOCAL_HOSTLIST
+#define DNS_LOCAL_HOSTLIST 0
+#endif /* DNS_LOCAL_HOSTLIST */
+
+/** If this is turned on, the local host-list can be dynamically changed
+ * at runtime. */
+#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
+#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0
+#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
+
+/*
+ ---------------------------------
+ ---------- UDP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on UDP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_UDP 1
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#ifndef LWIP_UDPLITE
+#define LWIP_UDPLITE 0
+#endif
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#ifndef UDP_TTL
+#define UDP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
+ */
+#ifndef LWIP_NETBUF_RECVINFO
+#define LWIP_NETBUF_RECVINFO 0
+#endif
+
+/*
+ ---------------------------------
+ ---------- TCP options ----------
+ ---------------------------------
+*/
+/**
+ * Turn on TCP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_TCP 1
+
+/**
+ * TCP_TTL: Default Time-To-Live value.
+ */
+#ifndef TCP_TTL
+#define TCP_TTL (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * TCP_WND: The size of a TCP window. This must be at least
+ * (2 * TCP_MSS) for things to work well
+ */
+#ifndef TCP_WND
+#define TCP_WND (4 * TCP_MSS)
+#endif
+
+/**
+ * TCP_MAXRTX: Maximum number of retransmissions of data segments.
+ */
+#ifndef TCP_MAXRTX
+#define TCP_MAXRTX 12
+#endif
+
+/**
+ * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
+ */
+#ifndef TCP_SYNMAXRTX
+#define TCP_SYNMAXRTX 6
+#endif
+
+/**
+ * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
+ * Define to 0 if your device is low on memory.
+ */
+#ifndef TCP_QUEUE_OOSEQ
+#define TCP_QUEUE_OOSEQ (LWIP_TCP)
+#endif
+
+/**
+ * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
+ * you might want to increase this.)
+ * For the receive side, this MSS is advertised to the remote side
+ * when opening a connection. For the transmit size, this MSS sets
+ * an upper limit on the MSS advertised by the remote host.
+ */
+#ifndef TCP_MSS
+#define TCP_MSS 536
+#endif
+
+/**
+ * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
+ * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
+ * reflects the available reassembly buffer size at the remote host) and the
+ * largest size permitted by the IP layer" (RFC 1122)
+ * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
+ * netif used for a connection and limits the MSS if it would be too big otherwise.
+ */
+#ifndef TCP_CALCULATE_EFF_SEND_MSS
+#define TCP_CALCULATE_EFF_SEND_MSS 1
+#endif
+
+
+/**
+ * TCP_SND_BUF: TCP sender buffer space (bytes).
+ */
+#ifndef TCP_SND_BUF
+#define TCP_SND_BUF (2 * TCP_MSS)
+#endif
+
+/**
+ * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+ * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
+ */
+#ifndef TCP_SND_QUEUELEN
+#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS))
+#endif
+
+/**
+ * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal
+ * to TCP_SND_BUF. It is the amount of space which must be available in the
+ * TCP snd_buf for select to return writable.
+ */
+#ifndef TCP_SNDLOWAT
+#define TCP_SNDLOWAT ((TCP_SND_BUF)/2)
+#endif
+
+/**
+ * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
+ */
+#ifndef TCP_LISTEN_BACKLOG
+#define TCP_LISTEN_BACKLOG 0
+#endif
+
+/**
+ * The maximum allowed backlog for TCP listen netconns.
+ * This backlog is used unless another is explicitly specified.
+ * 0xff is the maximum (u8_t).
+ */
+#ifndef TCP_DEFAULT_LISTEN_BACKLOG
+#define TCP_DEFAULT_LISTEN_BACKLOG 0xff
+#endif
+
+/**
+ * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
+ */
+#ifndef LWIP_TCP_TIMESTAMPS
+#define LWIP_TCP_TIMESTAMPS 0
+#endif
+
+/**
+ * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
+ * explicit window update
+ */
+#ifndef TCP_WND_UPDATE_THRESHOLD
+#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4)
+#endif
+
+/*
+ ----------------------------------
+ ---------- Pbuf options ----------
+ ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#ifndef PBUF_LINK_HLEN
+#define PBUF_LINK_HLEN 14
+#endif
+
+/**
+ * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
+ * designed to accomodate single full size TCP frame in one pbuf, including
+ * TCP_MSS, IP header, and link header.
+ */
+#ifndef PBUF_POOL_BUFSIZE
+#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
+#endif
+
+/*
+ ------------------------------------------------
+ ---------- Network Interfaces options ----------
+ ------------------------------------------------
+*/
+/**
+ * Use DHCP_OPTION_HOSTNAME with netif's hostname field.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_HOSTNAME 1
+
+/**
+ * Support netif api (in netifapi.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETIF_API 0
+
+/**
+ * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
+ * changes its up/down status (i.e., due to DHCP IP acquistion)
+ */
+#ifndef LWIP_NETIF_STATUS_CALLBACK
+#define LWIP_NETIF_STATUS_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#ifndef LWIP_NETIF_LINK_CALLBACK
+#define LWIP_NETIF_LINK_CALLBACK 0
+#endif
+
+/**
+ * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
+ * indices) in struct netif. TCP and UDP can make use of this to prevent
+ * scanning the ARP table for every sent packet. While this is faster for big
+ * ARP tables or many concurrent connections, it might be counterproductive
+ * if you have a tiny ARP table or if there never are concurrent connections.
+ */
+#ifndef LWIP_NETIF_HWADDRHINT
+#define LWIP_NETIF_HWADDRHINT 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
+ * address equal to the netif IP address, looping them back up the stack.
+ */
+#ifndef LWIP_NETIF_LOOPBACK
+#define LWIP_NETIF_LOOPBACK 0
+#endif
+
+/**
+ * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
+ * sending for each netif (0 = disabled)
+ */
+#ifndef LWIP_LOOPBACK_MAX_PBUFS
+#define LWIP_LOOPBACK_MAX_PBUFS 0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
+ * the system, as netifs must change how they behave depending on this setting
+ * for the LWIP_NETIF_LOOPBACK option to work.
+ * Setting this is needed to avoid reentering non-reentrant functions like
+ * tcp_input().
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
+ * multithreaded environment like tcpip.c. In this case, netif->input()
+ * is called directly.
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
+ * The packets are put on a list and netif_poll() must be called in
+ * the main application loop.
+ */
+#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
+#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS)
+#endif
+
+/**
+ * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
+ * to be sent into one single pbuf. This is for compatibility with DMA-enabled
+ * MACs that do not support scatter-gather.
+ * Beware that this might involve CPU-memcpy before transmitting that would not
+ * be needed without this flag! Use this only if you need to!
+ *
+ * @todo: TCP and IP-frag do not work with this, yet:
+ */
+#ifndef LWIP_NETIF_TX_SINGLE_PBUF
+#define LWIP_NETIF_TX_SINGLE_PBUF 0
+#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
+
+/*
+ ------------------------------------
+ ---------- LOOPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support loop interface (127.0.0.1) and loopif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_LOOPIF 0
+
+/*
+ ------------------------------------
+ ---------- SLIPIF options ----------
+ ------------------------------------
+*/
+/**
+ * Support slip interface and slipif.c
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_HAVE_SLIPIF 0
+
+/*
+ ------------------------------------
+ ---------- Thread options ----------
+ ------------------------------------
+*/
+/**
+ * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
+ */
+#ifndef TCPIP_THREAD_NAME
+#define TCPIP_THREAD_NAME "tcpip_thread"
+#endif
+
+/**
+ * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_STACKSIZE
+#define TCPIP_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_PRIO
+#define TCPIP_THREAD_PRIO 0
+#endif
+
+/**
+ * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when tcpip_init is called.
+ */
+#ifndef TCPIP_MBOX_SIZE
+#define TCPIP_MBOX_SIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
+ */
+#ifndef SLIPIF_THREAD_NAME
+#define SLIPIF_THREAD_NAME "slipif_loop"
+#endif
+
+/**
+ * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_STACKSIZE
+#define SLIPIF_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_PRIO
+#define SLIPIF_THREAD_PRIO 1
+#endif
+
+/**
+ * PPP_THREAD_NAME: The name assigned to the pppMain thread.
+ */
+#ifndef PPP_THREAD_NAME
+#define PPP_THREAD_NAME "pppMain"
+#endif
+
+/**
+ * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_STACKSIZE
+#define PPP_THREAD_STACKSIZE 0
+#endif
+
+/**
+ * PPP_THREAD_PRIO: The priority assigned to the pppMain thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_PRIO
+#define PPP_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
+ */
+#ifndef DEFAULT_THREAD_NAME
+#define DEFAULT_THREAD_NAME "lwIP"
+#endif
+
+/**
+ * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_STACKSIZE
+#define DEFAULT_THREAD_STACKSIZE (KERN_MINSTACKSIZE * 3)
+#endif
+
+/**
+ * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_PRIO
+#define DEFAULT_THREAD_PRIO 1
+#endif
+
+/**
+ * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_RAW_RECVMBOX_SIZE
+#define DEFAULT_RAW_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_UDP_RECVMBOX_SIZE
+#define DEFAULT_UDP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_TCP_RECVMBOX_SIZE
+#define DEFAULT_TCP_RECVMBOX_SIZE 0
+#endif
+
+/**
+ * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when the acceptmbox is created.
+ */
+#ifndef DEFAULT_ACCEPTMBOX_SIZE
+#define DEFAULT_ACCEPTMBOX_SIZE 0
+#endif
+
+/*
+ ----------------------------------------------
+ ---------- Sequential layer options ----------
+ ----------------------------------------------
+*/
+/**
+ * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING
+#define LWIP_TCPIP_CORE_LOCKING 0
+#endif
+
+/**
+ * Enable Netconn API (require to use api_lib.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_NETCONN 1
+
+/*
+ ------------------------------------
+ ---------- Socket options ----------
+ ------------------------------------
+*/
+/**
+ * Enable Socket API (require to use sockets.c)
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define LWIP_SOCKET 1
+
+/**
+ * Enable BSD-style sockets functions names.
+ *
+ * NOTE: do not change this!!!
+ */
+#ifndef LWIP_COMPAT_SOCKETS
+#define LWIP_COMPAT_SOCKETS 0
+#endif
+
+/**
+ * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
+ * Disable this option if you use a POSIX operating system that uses the same
+ * names (read, write & close). (only used if you use sockets.c)
+ */
+#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
+#define LWIP_POSIX_SOCKETS_IO_NAMES 0
+#endif
+
+/**
+ * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
+ * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
+ * in seconds. (does not require sockets.c, and will affect tcp.c)
+ */
+#ifndef LWIP_TCP_KEEPALIVE
+#define LWIP_TCP_KEEPALIVE 0
+#endif
+
+/**
+ * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing.
+ */
+#ifndef LWIP_SO_RCVTIMEO
+#define LWIP_SO_RCVTIMEO 0
+#endif
+
+/**
+ * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
+ */
+#ifndef LWIP_SO_RCVBUF
+#define LWIP_SO_RCVBUF 0
+#endif
+
+/**
+ * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
+ */
+#ifndef RECV_BUFSIZE_DEFAULT
+#define RECV_BUFSIZE_DEFAULT INT_MAX
+#endif
+
+/**
+ * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE!
+ */
+#ifndef SO_REUSE
+#define SO_REUSE 0
+#endif
+
+/*
+ ----------------------------------------
+ ---------- Statistics options ----------
+ ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#ifndef LWIP_STATS
+#define LWIP_STATS 0
+#endif
+
+#if LWIP_STATS
+
+/**
+ * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
+ */
+#ifndef LWIP_STATS_DISPLAY
+#define LWIP_STATS_DISPLAY 0
+#endif
+
+/**
+ * LINK_STATS==1: Enable link stats.
+ */
+#ifndef LINK_STATS
+#define LINK_STATS 1
+#endif
+
+/**
+ * ETHARP_STATS==1: Enable etharp stats.
+ */
+#ifndef ETHARP_STATS
+#define ETHARP_STATS (LWIP_ARP)
+#endif
+
+/**
+ * IP_STATS==1: Enable IP stats.
+ */
+#ifndef IP_STATS
+#define IP_STATS 1
+#endif
+
+/**
+ * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
+ * on if using either frag or reass.
+ */
+#ifndef IPFRAG_STATS
+#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG)
+#endif
+
+/**
+ * ICMP_STATS==1: Enable ICMP stats.
+ */
+#ifndef ICMP_STATS
+#define ICMP_STATS 1
+#endif
+
+/**
+ * IGMP_STATS==1: Enable IGMP stats.
+ */
+#ifndef IGMP_STATS
+#define IGMP_STATS (LWIP_IGMP)
+#endif
+
+/**
+ * UDP_STATS==1: Enable UDP stats. Default is on if
+ * UDP enabled, otherwise off.
+ */
+#ifndef UDP_STATS
+#define UDP_STATS (LWIP_UDP)
+#endif
+
+/**
+ * TCP_STATS==1: Enable TCP stats. Default is on if TCP
+ * enabled, otherwise off.
+ */
+#ifndef TCP_STATS
+#define TCP_STATS (LWIP_TCP)
+#endif
+
+/**
+ * MEM_STATS==1: Enable mem.c stats.
+ */
+#ifndef MEM_STATS
+#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
+#endif
+
+/**
+ * MEMP_STATS==1: Enable memp.c pool stats.
+ */
+#ifndef MEMP_STATS
+#define MEMP_STATS (MEMP_MEM_MALLOC == 0)
+#endif
+
+/**
+ * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
+ */
+#ifndef SYS_STATS
+#define SYS_STATS (NO_SYS == 0)
+#endif
+
+#else
+
+#define LINK_STATS 0
+#define ETHARP_STATS 0
+#define IP_STATS 0
+#define IPFRAG_STATS 0
+#define ICMP_STATS 0
+#define IGMP_STATS 0
+#define UDP_STATS 0
+#define TCP_STATS 0
+#define MEM_STATS 0
+#define MEMP_STATS 0
+#define SYS_STATS 0
+#define LWIP_STATS_DISPLAY 0
+
+#endif /* LWIP_STATS */
+
+/*
+ ---------------------------------
+ ---------- PPP options ----------
+ ---------------------------------
+*/
+/**
+ * Enable PPP.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPP_SUPPORT 0
+
+/**
+ * Enable PPP Over Ethernet.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define PPPOE_SUPPORT 0
+
+/**
+ * PPPOS_SUPPORT==1: Enable PPP Over Serial
+ */
+#ifndef PPPOS_SUPPORT
+#define PPPOS_SUPPORT PPP_SUPPORT
+#endif
+
+#if PPP_SUPPORT
+
+/**
+ * NUM_PPP: Max PPP sessions.
+ */
+#ifndef NUM_PPP
+#define NUM_PPP 1
+#endif
+
+/**
+ * PAP_SUPPORT==1: Support PAP.
+ */
+#ifndef PAP_SUPPORT
+#define PAP_SUPPORT 0
+#endif
+
+/**
+ * CHAP_SUPPORT==1: Support CHAP.
+ */
+#ifndef CHAP_SUPPORT
+#define CHAP_SUPPORT 0
+#endif
+
+/**
+ * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef MSCHAP_SUPPORT
+#define MSCHAP_SUPPORT 0
+#endif
+
+/**
+ * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CBCP_SUPPORT
+#define CBCP_SUPPORT 0
+#endif
+
+/**
+ * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CCP_SUPPORT
+#define CCP_SUPPORT 0
+#endif
+
+/**
+ * VJ_SUPPORT==1: Support VJ header compression.
+ */
+#ifndef VJ_SUPPORT
+#define VJ_SUPPORT 0
+#endif
+
+/**
+ * MD5_SUPPORT==1: Support MD5 (see also CHAP).
+ */
+#ifndef MD5_SUPPORT
+#define MD5_SUPPORT 0
+#endif
+
+/*
+ * Timeouts
+ */
+#ifndef FSM_DEFTIMEOUT
+#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef FSM_DEFMAXTERMREQS
+#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXCONFREQS
+#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXNAKLOOPS
+#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
+#endif
+
+#ifndef UPAP_DEFTIMEOUT
+#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */
+#endif
+
+#ifndef UPAP_DEFREQTIME
+#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
+#endif
+
+#ifndef CHAP_DEFTIMEOUT
+#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */
+#endif
+
+#ifndef CHAP_DEFTRANSMITS
+#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
+#endif
+
+/* Interval in seconds between keepalive echo requests, 0 to disable. */
+#ifndef LCP_ECHOINTERVAL
+#define LCP_ECHOINTERVAL 0
+#endif
+
+/* Number of unanswered echo requests before failure. */
+#ifndef LCP_MAXECHOFAILS
+#define LCP_MAXECHOFAILS 3
+#endif
+
+/* Max Xmit idle time (in jiffies) before resend flag char. */
+#ifndef PPP_MAXIDLEFLAG
+#define PPP_MAXIDLEFLAG 100
+#endif
+
+/*
+ * Packet sizes
+ *
+ * Note - lcp shouldn't be allowed to negotiate stuff outside these
+ * limits. See lcp.h in the pppd directory.
+ * (XXX - these constants should simply be shared by lcp.c instead
+ * of living in lcp.h)
+ */
+#define PPP_MTU 1500 /* Default MTU (size of Info field) */
+#ifndef PPP_MAXMTU
+/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */
+#define PPP_MAXMTU 1500 /* Largest MTU we allow */
+#endif
+#define PPP_MINMTU 64
+#define PPP_MRU 1500 /* default MRU = max length of info field */
+#define PPP_MAXMRU 1500 /* Largest MRU we allow */
+#ifndef PPP_DEFMRU
+#define PPP_DEFMRU 296 /* Try for this */
+#endif
+#define PPP_MINMRU 128 /* No MRUs below this */
+
+#ifndef MAXNAMELEN
+#define MAXNAMELEN 256 /* max length of hostname or name for auth */
+#endif
+#ifndef MAXSECRETLEN
+#define MAXSECRETLEN 256 /* max length of password or secret */
+#endif
+
+#endif /* PPP_SUPPORT */
+
+/*
+ --------------------------------------
+ ---------- Checksum options ----------
+ --------------------------------------
+*/
+/**
+ * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
+ */
+#ifndef CHECKSUM_GEN_IP
+#define CHECKSUM_GEN_IP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
+ */
+#ifndef CHECKSUM_GEN_UDP
+#define CHECKSUM_GEN_UDP 1
+#endif
+
+/**
+ * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
+ */
+#ifndef CHECKSUM_GEN_TCP
+#define CHECKSUM_GEN_TCP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
+ */
+#ifndef CHECKSUM_CHECK_IP
+#define CHECKSUM_CHECK_IP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
+ */
+#ifndef CHECKSUM_CHECK_UDP
+#define CHECKSUM_CHECK_UDP 1
+#endif
+
+/**
+ * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
+ */
+#ifndef CHECKSUM_CHECK_TCP
+#define CHECKSUM_CHECK_TCP 1
+#endif
+
+/*
+ ---------------------------------------
+ ---------- Debugging options ----------
+ ---------------------------------------
+*/
+
+#ifdef _DEBUG
+#define LWIP_DEBUG
+#endif
+
+/**
+ * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
+ * compared against this value. If it is smaller, then debugging
+ * messages are written.
+ */
+#ifndef LWIP_DBG_MIN_LEVEL
+#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
+#endif
+
+/**
+ * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
+ * debug messages of certain types.
+ */
+#ifndef LWIP_DBG_TYPES_ON
+#define LWIP_DBG_TYPES_ON LWIP_DBG_ON
+#endif
+
+/**
+ * ETHARP_DEBUG: Enable debugging in etharp.c.
+ */
+#ifndef ETHARP_DEBUG
+#define ETHARP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * NETIF_DEBUG: Enable debugging in netif.c.
+ */
+#ifndef NETIF_DEBUG
+#define NETIF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PBUF_DEBUG: Enable debugging in pbuf.c.
+ */
+#ifndef PBUF_DEBUG
+#define PBUF_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_LIB_DEBUG: Enable debugging in api_lib.c.
+ */
+#ifndef API_LIB_DEBUG
+#define API_LIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * API_MSG_DEBUG: Enable debugging in api_msg.c.
+ */
+#ifndef API_MSG_DEBUG
+#define API_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SOCKETS_DEBUG: Enable debugging in sockets.c.
+ */
+#ifndef SOCKETS_DEBUG
+#define SOCKETS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * ICMP_DEBUG: Enable debugging in icmp.c.
+ */
+#ifndef ICMP_DEBUG
+#define ICMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IGMP_DEBUG: Enable debugging in igmp.c.
+ */
+#ifndef IGMP_DEBUG
+#define IGMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * INET_DEBUG: Enable debugging in inet.c.
+ */
+#ifndef INET_DEBUG
+#define INET_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_DEBUG: Enable debugging for IP.
+ */
+#ifndef IP_DEBUG
+#define IP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
+ */
+#ifndef IP_REASS_DEBUG
+#define IP_REASS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * RAW_DEBUG: Enable debugging in raw.c.
+ */
+#ifndef RAW_DEBUG
+#define RAW_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEM_DEBUG: Enable debugging in mem.c.
+ */
+#ifndef MEM_DEBUG
+#define MEM_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * MEMP_DEBUG: Enable debugging in memp.c.
+ */
+#ifndef MEMP_DEBUG
+#define MEMP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SYS_DEBUG: Enable debugging in sys.c.
+ */
+#ifndef SYS_DEBUG
+#define SYS_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_DEBUG: Enable debugging for TCP.
+ */
+#ifndef TCP_DEBUG
+#define TCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
+ */
+#ifndef TCP_INPUT_DEBUG
+#define TCP_INPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
+ */
+#ifndef TCP_FR_DEBUG
+#define TCP_FR_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
+ * timeout.
+ */
+#ifndef TCP_RTO_DEBUG
+#define TCP_RTO_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
+ */
+#ifndef TCP_CWND_DEBUG
+#define TCP_CWND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
+ */
+#ifndef TCP_WND_DEBUG
+#define TCP_WND_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
+ */
+#ifndef TCP_OUTPUT_DEBUG
+#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
+ */
+#ifndef TCP_RST_DEBUG
+#define TCP_RST_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
+ */
+#ifndef TCP_QLEN_DEBUG
+#define TCP_QLEN_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * UDP_DEBUG: Enable debugging in UDP.
+ */
+#ifndef UDP_DEBUG
+#define UDP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * TCPIP_DEBUG: Enable debugging in tcpip.c.
+ */
+#ifndef TCPIP_DEBUG
+#define TCPIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * PPP_DEBUG: Enable debugging for PPP.
+ */
+#ifndef PPP_DEBUG
+#define PPP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SLIP_DEBUG: Enable debugging in slipif.c.
+ */
+#ifndef SLIP_DEBUG
+#define SLIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DHCP_DEBUG: Enable debugging in dhcp.c.
+ */
+#ifndef DHCP_DEBUG
+#define DHCP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * AUTOIP_DEBUG: Enable debugging in autoip.c.
+ */
+#ifndef AUTOIP_DEBUG
+#define AUTOIP_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
+ */
+#ifndef SNMP_MSG_DEBUG
+#define SNMP_MSG_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
+ */
+#ifndef SNMP_MIB_DEBUG
+#define SNMP_MIB_DEBUG LWIP_DBG_OFF
+#endif
+
+/**
+ * DNS_DEBUG: Enable debugging for DNS.
+ */
+#ifndef DNS_DEBUG
+#define DNS_DEBUG LWIP_DBG_OFF
+#endif
+
+/* Custom definitions: !!!DO NOT CHANGE THIS SECTION!!! */
+#define LWIP_TIMEVAL_PRIVATE 0
+
+#endif /* CFG_LWIP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for MD2 module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_MD2_H
+#define CFG_MD2_H
+
+/**
+ * Size of block for MD2 algorithm.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm. $WIZ$ type = "boolean"
+#define CONFIG_MD2_STD_PERM 0
+
+#endif /* CFG_MD2_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2001, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 1999, 2000, 2001, 2008 Bernie Innocenti <bernie@codewiz.org>
+ * -->
+ *
+ * \brief Kernel monitor configuration parameters
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ */
+
+#ifndef CFG_MONITOR_H
+#define CFG_MONITOR_H
+
+/**
+ * Process monitor.
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_KERN_MONITOR 1
+
+#endif /* CFG_MONITOR_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for NMEA module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_NMEA_H
+#define CFG_NMEA_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define NMEA_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define NMEA_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Maximum number of sentence parsers supported.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_NMEAP_MAX_SENTENCES 8
+
+/**
+ * Max length of a complete sentence. The standard says 82 bytes, but its probably
+ * better to go at least 128 since some units don't adhere to the 82 bytes
+ * especially for proprietary sentences.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_NMEAP_MAX_SENTENCE_LENGTH 255
+
+/**
+ * Max tokens in one sentence. 24 is enough for any standard sentence.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_NMEAP_MAX_TOKENS 24
+
+#endif /* CFG_NMEA_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for parser module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_PARSER_H
+#define CFG_PARSER_H
+
+/**
+ * Max number of arguments and results for each command
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_PARSER_MAX_ARGS 4
+
+/**
+ * Max number of commands
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_MAX_COMMANDS_NUMBER 16
+
+/**
+ * Enable compatibility behaviour.
+ *
+ * Skip the first word from incoming commands. Don't enable in new projects.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_ENABLE_COMPAT_BEHAVIOUR 1
+
+#endif /* CFG_PARSER_H */
+
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for phase module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_PHASE_H
+#define CFG_PHASE_H
+
+/**
+ * Max value of the duty cycle on triac.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_TRIAC_MAX_DUTY 100
+
+/**
+ * Max value of the triac power.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_TRIAC_MAX_POWER 100
+
+#endif /* CFG_PHASE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for pocketbus module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_POCKETBUS_H
+#define CFG_POCKETBUS_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define POCKETBUS_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define POCKETBUS_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ *Buffer len for pockebus protocol.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_POCKETBUS_BUFLEN 128
+
+/**
+ * Command replay timeout in milliseconds.
+ * $WIZ$ type = "int"
+ */
+#define CONFIG_POCKETBUS_CMD_REPLY_TIMEOUT 50
+
+#endif /* CFG_POCKETBUS_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2001, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 1999, 2000, 2001, 2008 Bernie Innocenti <bernie@codewiz.org>
+ * -->
+ *
+ * \brief Kernel configuration parameters
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ */
+
+#ifndef CFG_PROC_H
+#define CFG_PROC_H
+
+/**
+ * Enable the multithreading kernel.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_KERN 1
+
+/**
+ * Kernel interrupt supervisor. WARNING: Experimental, still incomplete!
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
+#define CONFIG_KERN_IRQ 0
+
+/**
+ * Preemptive process scheduling.
+ *
+ * $WIZ$ type = "boolean"
+ * $WIZ$ conditional_deps = "timer"
+ */
+#define CONFIG_KERN_PREEMPT 0
+
+/**
+ * Time sharing quantum (a prime number prevents interference effects) [ms].
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_KERN_QUANTUM 11
+
+/**
+ * Priority-based scheduling policy.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_KERN_PRI 1
+
+/**
+ * Dynamic memory allocation for processes.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ conditional_deps = "heap"
+ */
+#define CONFIG_KERN_HEAP 1
+
+/**
+ * Size of the dynamic memory pool used by processes.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_KERN_HEAP_SIZE 1024L
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define KERN_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define KERN_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_PROC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief Configuration file for PWM module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_PWM_H
+#define CFG_PWM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define PWM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define PWM_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_PWM_H */
--- /dev/null
+ /**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file Ramp algorithm module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_RAMP_H
+#define CFG_RAMP_H
+
+/**
+ * Define whether the ramp will use floating point calculation within ramp_evaluate().
+ * Otherwise, a less precise fixed point version will be used, which is faster on
+ * platforms which do no support floating point operations.
+ *
+ * \note Floating point operations will be always done within ramp_compute() to
+ * precalculate values, so there has to be at least a floating point emulation support.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define RAMP_USE_FLOATING_POINT 0
+
+
+#if !RAMP_USE_FLOATING_POINT
+
+ /**
+ * Number of least-significant bits which are stripped away during ramp evaluation.
+ * This setting allows to specify larger ramps at the price of less precision.
+ *
+ * The maximum ramp size allowed is 2^(24 + RAMP_CLOCK_SHIFT_PRECISION), in clocks.
+ * For instance, using RAMP_CLOCK_SHIFT_PRECISION 1, and a 8x prescaler, the maximum
+ * length of a ramp is about 6.7 secs. Raising RAMP_CLOCK_SHIFT_PRECISION to 2
+ * brings the maximum length to 13.4 secs, at the price of less precision.
+ *
+ * ramp_compute() will check that the length is below the maximum allowed through
+ * a runtime assertion.
+ *
+ * \note This macro is used only for the fixed-point version of the ramp.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ * $WIZ$ max = 32
+ */
+ #define RAMP_CLOCK_SHIFT_PRECISION 2
+#endif
+
+
+/**
+* Negative pulse width for ramp.
+* $WIZ$ type = "int"
+* $WIZ$ min = 1
+*/
+#define RAMP_PULSE_WIDTH 50
+
+/**
+ * Default ramp time (microsecs).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1000
+ */
+#define RAMP_DEF_TIME 6000000UL
+/**
+ * Default ramp maxfreq (Hz).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define RAMP_DEF_MAXFREQ 5000
+/**
+ * Default ramp minfreq (Hz).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define RAMP_DEF_MINFREQ 200
+/**
+ * Default ramp powerrun (deciampere).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define RAMP_DEF_POWERRUN 10
+/**
+ * Default ramp poweridle (Hz).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define RAMP_DEF_POWERIDLE 1
+
+#endif /* CFG_RAMP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2011 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the "random" module
+ */
+
+#ifndef CFG_RANDOM_H
+#define CFG_RANDOM_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define RANDOM_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define RANDOM_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Random security level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "random_level"
+ */
+#define RANDOM_SECURITY_LEVEL RANDOM_SECURITY_MINIMUM
+
+#endif /* CFG_RANDOM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for randpool module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_RANDPOOL_H
+#define CFG_RANDPOOL_H
+
+
+/**
+ * Define a size, in byte, of entropy pool.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Enable timer in randpool algo. $WIZ$ type = "boolean"
+#define CONFIG_RANDPOOL_TIMER 1
+
+#endif /* CFG_RANDPOOL_H */
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file Secure Digital module.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef CFG_SD_H
+#define CFG_SD_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define SD_LOG_LEVEL LOG_LVL_ERR
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define SD_LOG_FORMAT LOG_FMT_VERBOSE
+
+
+/**
+ * Enable autoassignment of SD driver to disk drive number 0 of FatFs module.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ conditional_deps = "fat"
+ */
+#define CONFIG_SD_AUTOASSIGN_FAT 1
+
+/**
+ * Enable backward compatibility for sd_init().
+ * If enabled, sd_init() will allocate internally an Sd context,
+ * otherwise sd_init() will need the context to be passed explicitly.
+ *
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_SD_OLD_INIT 1
+
+#endif /* CFG_SD_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2001, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 1999, 2000, 2001, 2008 Bernie Innocenti <bernie@codewiz.org>
+ * -->
+ *
+ * \brief Kernel semaphores configuration parameters.
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ */
+
+#ifndef CFG_SEM_H
+#define CFG_SEM_H
+
+/**
+ * Re-entrant mutual exclusion primitives.
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_KERN_SEMAPHORES 1
+
+#endif /* CFG_SEM_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for serial module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_SER_H
+#define CFG_SER_H
+
+/**
+ * Example of setting for serial port and
+ * spi port.
+ * Edit these define for your project.
+ */
+
+/**
+ * Size of the outbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_UART0_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_UART0_RXBUFSIZE 32
+
+/**
+ * Size of the outbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
+#define CONFIG_UART1_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
+#define CONFIG_UART1_RXBUFSIZE 32
+
+/**
+ * Size of the outbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2"
+ */
+#define CONFIG_UART2_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2"
+ */
+#define CONFIG_UART2_RXBUFSIZE 32
+
+/**
+ * Size of the outbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2"
+ */
+#define CONFIG_UART3_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2"
+ */
+#define CONFIG_UART3_RXBUFSIZE 32
+
+
+/**
+ * Size of the outbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_RXBUFSIZE 32
+
+/**
+ * Size of the outbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI0_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI0_RXBUFSIZE 32
+
+/**
+ * Size of the outbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI1_TXBUFSIZE 32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI1_RXBUFSIZE 32
+
+/**
+ * SPI data order.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_order_bit"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+/**
+ * SPI clock division factor.
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_DIV 16
+
+/**
+ * SPI clock polarity: normal low or normal high.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_pol"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
+
+/**
+ * SPI clock phase you can choose sample on first edge or
+ * sample on second clock edge.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_phase"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
+
+/**
+ * Default transmit timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
+#define CONFIG_SER_TXTIMEOUT -1
+
+/**
+ * Default receive timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
+#define CONFIG_SER_RXTIMEOUT -1
+
+/**
+ * Use RTS/CTS handshake.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
+#define CONFIG_SER_HWHANDSHAKE 0
+
+/**
+ * Default baudrate for all serial ports (set to 0 to disable).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_SER_DEFBAUDRATE 0UL
+
+/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean"
+#define CONFIG_SER_STROBE 0
+
+#endif /* CFG_SER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2001, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 1999, 2000, 2001, 2008 Bernie Innocenti <bernie@codewiz.org>
+ * -->
+ *
+ * \brief Kernel signals configuration parameters
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ */
+
+#ifndef CFG_SIGNAL_H
+#define CFG_SIGNAL_H
+
+/**
+ * Inter-process signals.
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_KERN_SIGNALS 1
+
+#endif /* CFG_SIGNAL_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for SPI bitbang module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_SPI_BITBANG_H
+#define CFG_SPI_BITBANG_H
+
+/**
+ * Set data order for emulated SPI.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ordet_bit_list"
+ */
+#define CONFIG_SPI_DATAORDER SPI_LSB_FIRST
+
+#endif /* CFG_SPI_BITBANG_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for stepper motor module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_STEPPER_H
+#define CFG_STEPPER_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define STEPPER_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define STEPPER_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Max number of the stepper motor.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_NUM_STEPPER_MOTORS 6
+
+/**
+ * Max number of the timer usable on target to drive stepper motor.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_TC_STEPPER_MAX_NUM 6
+
+#endif /* CFG_STEPPER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for the TAS5706A module.
+ *
+ * \author Luca Ottaviano <lottaviano@develer.com>
+ */
+
+#ifndef CFG_TAS5706A_H
+#define CFG_TAS5706A_H
+
+/**
+ * Maximum output volume for TAS chip [dB].
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -100
+ * $WIZ$ max = 24
+ */
+#define CONFIG_TAS_MAX_VOL -39
+
+#endif /* CFG_TAS5706A_H */
--- /dev/null
+#ifndef CFG_TFTP_H
+#define CFG_TFTP_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define TFTP_LOG_LEVEL LOG_LVL_WARN
+
+/**
+ * Module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define TFTP_LOG_FORMAT LOG_FMT_VERBOSE
+
+#endif /* CFG_TFTP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Configuration file for thermo module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_THERMO_H
+#define CFG_THERMO_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_THERMO_LOG_LEVEL LOG_LVL_ERR
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_THERMO_LOG_FORMAT LOG_FMT_TERSE
+
+
+/**
+ * Interval at which thermo control is performed [ms].
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_THERMO_INTERVAL_MS 100
+
+/**
+ * Number of different samples we interpolate over to get the hifi temperature.
+ *
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_THERMO_HIFI_NUM_SAMPLES 10
+
+#endif /* CFG_THERMO_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for timer module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_TIMER_H
+#define CFG_TIMER_H
+
+/**
+ * Hardware timer selection for drv/timer.c.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "timer_select"
+ */
+#define CONFIG_TIMER TIMER_DEFAULT
+
+/**
+ * Debug timer interrupt using a strobe pin.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_TIMER_STROBE 0
+
+/**
+ * Enable asynchronous timers.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_TIMER_EVENTS 1
+
+/**
+ * Support hi-res timer_usleep().
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_TIMER_UDELAY 1
+
+#endif /* CFG_TIMER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the USB driver module
+ */
+
+#ifndef CFG_USB_H
+#define CFG_USB_H
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * Size of the USB buffer used for endpoint transfers [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_USB_BUFSIZE 64
+
+/**
+ * Maximum number of USB device interfaces (default = 1).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_USB_INTERFACE_MAX 1
+
+/**
+ * Maximum number of allocated endpoints (0 = auto).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_USB_EP_MAX 0
+
+/**
+ * Maximum packet size of the control endpoint 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 8
+ */
+#define CONFIG_EP0_MAX_SIZE 8
+
+#endif /* CFG_USB_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the usbkbd driver module
+ */
+
+#ifndef CFG_USBKBD_H
+#define CFG_USBKBD_H
+
+/**
+ * Enable the usbkbd module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBKBD 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_KEYBOARD_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_KEYBOARD_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_KEYBOARD_VENDOR_ID 0x046d
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_KEYBOARD_PRODUCT_ID 0xffff
+
+#endif /* CFG_USB_KEYBOARD_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the usbmouse driver module
+ */
+
+#ifndef CFG_USBMOUSE_H
+#define CFG_USBMOUSE_H
+
+/**
+ * Enable the usbmouse module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBMOUSE 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_MOUSE_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_MOUSE_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_MOUSE_VENDOR_ID 0xffff
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_MOUSE_PRODUCT_ID 0x0000
+
+#endif /* CFG_USBMOUSE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Configuration file for the USB serial driver module
+ */
+
+#ifndef CFG_USBSER_H
+#define CFG_USBSER_H
+
+/**
+ * Enable the usb-serial module.
+ *
+ * $WIZ$ type = "autoenabled"
+ */
+#define CONFIG_USBSER 0
+
+/**
+ * Module logging level.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define USB_SERIAL_LOG_LEVEL LOG_LVL_INFO
+
+/**
+ * module logging format.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define USB_SERIAL_LOG_FORMAT LOG_FMT_TERSE
+
+/**
+ * USB vendor ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_SERIAL_VENDOR_ID 0x05f9
+
+/**
+ * USB product ID (please change this in your project, using a valid ID number!).
+ *
+ * $WIZ$ type = "hex"
+ */
+#define USB_SERIAL_PRODUCT_ID 0xffff
+
+#endif /* CFG_USBSER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for watchdog module.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_WDT_H
+#define CFG_WDT_H
+
+/// Enable watchdog timer. $WIZ$ type = "autoenabled"
+#define CONFIG_WATCHDOG 0
+
+#endif /* CFG_WDT_H */
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for xmodem module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_XMODEM_H
+#define CFG_XMODEM_H
+
+/**
+ * Module logging level.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_level"
+ */
+#define CONFIG_XMODEM_LOG_LEVEL LOG_LVL_ERR
+/**
+ * Module logging format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "log_format"
+ */
+#define CONFIG_XMODEM_LOG_FORMAT LOG_FMT_TERSE
+
+
+/// Enable Rx. $WIZ$ type = "boolean"
+#define CONFIG_XMODEM_RECV 1
+
+/// Enable TX. $WIZ$ type = "boolean"
+#define CONFIG_XMODEM_SEND 1
+
+/// Allow a Rx/Tx of 1Kbyte block. $WIZ$ type = "boolean"
+#define CONFIG_XMODEM_1KCRC 1
+
+/**
+ * Max retries before giving up.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_XMODEM_MAXRETRIES 15
+
+/**
+ * Max retries before switching to BCC.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 1
+ */
+#define CONFIG_XMODEM_MAXCRCRETRIES 7
+
+#endif /* CFG_XMODEM_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief AFSK modem hardware-specific definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+
+#include "hw_afsk.h"
+
+#include <net/afsk.h>
+#include <cpu/irq.h>
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+
+/*
+ * Here we are using only one modem. If you need to receive
+ * from multiple modems, you need to define an array of contexts.
+ */
+static Afsk *ctx;
+
+void hw_afsk_adcInit(int ch, Afsk *_ctx)
+{
+ ctx = _ctx;
+ ASSERT(ch <= 5);
+
+ AFSK_STROBE_INIT();
+ AFSK_STROBE_OFF();
+ /* Set prescaler to clk/8 (2 MHz), CTC, top = ICR1 */
+ TCCR1A = 0;
+ TCCR1B = BV(CS11) | BV(WGM13) | BV(WGM12);
+ /* Set max value to obtain a 9600Hz freq */
+ ICR1 = ((CPU_FREQ / 8) / 9600) - 1;
+
+ /* Set reference to AVCC (5V), select CH */
+ ADMUX = BV(REFS0) | ch;
+
+ DDRC &= ~BV(ch);
+ PORTC &= ~BV(ch);
+ DIDR0 |= BV(ch);
+
+ /* Set autotrigger on Timer1 Input capture flag */
+ ADCSRB = BV(ADTS2) | BV(ADTS1) | BV(ADTS0);
+ /* Enable ADC, autotrigger, 1MHz, IRQ enabled */
+ /* We are using the ADC a bit out of specifications otherwise it's not fast enough for our
+ * purposes */
+ ADCSRA = BV(ADEN) | BV(ADSC) | BV(ADATE) | BV(ADIE) | BV(ADPS2);
+}
+
+
+bool hw_afsk_dac_isr;
+
+/*
+ * This is how you declare an ISR.
+ */
+DECLARE_ISR(ADC_vect)
+{
+ TIFR1 = BV(ICF1);
+ afsk_adc_isr(ctx, ((int16_t)((ADC) >> 2) - 128));
+ if (hw_afsk_dac_isr)
+ PORTD = afsk_dac_isr(ctx) & 0xF0;
+ else
+ PORTD = 128;
+}
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief AFSK modem hardware-specific definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_AFSK_H
+#define HW_AFSK_H
+
+#include "cfg/cfg_arch.h"
+
+#include <avr/io.h>
+
+struct Afsk;
+void hw_afsk_adcInit(int ch, struct Afsk *_ctx);
+void hw_afsk_dacInit(int ch, struct Afsk *_ctx);
+
+/**
+ * Initialize the specified channel of the ADC for AFSK needs.
+ * The adc should be configured to have a continuos stream of convertions.
+ * For every convertion there must be an ISR that read the sample
+ * and call afsk_adc_isr(), passing the context and the sample.
+ *
+ * \param ch channel to be used for AFSK demodulation.
+ * \param ctx AFSK context (\see Afsk). This parameter must be saved and
+ * passed back to afsk_adc_isr() for every convertion.
+ */
+
+/*
+ * This macro will be called for AFSK initialization. We could implement everything here as a macro,
+ * but since initialization is rather complicated we decided to split its own function. Such function
+ * is defined in hw_afsk.c.
+ * Remember: since this .c file is not created by the wizard, you must add it to your_project_name.mk.
+ * If you create the file using BeRTOS SDK, it will be added for you.
+ */
+#define AFSK_ADC_INIT(ch, ctx) hw_afsk_adcInit(ch, ctx)
+
+/*
+ * Activate strobe pin. We use it for debugging purposes. If you don't use it, simply
+ * leave empty the following macros
+ */
+#define AFSK_STROBE_INIT() do { DDRB |= BV(5); } while (0)
+
+/*
+ * Set the pin high. This macro is called at the beginning of the interrupt routine
+ */
+#define AFSK_STROBE_ON() do { PORTB |= BV(5); } while (0)
+
+/*
+ * Set the pin low. This macro is called at the end of the interrupt routine
+ */
+#define AFSK_STROBE_OFF() do { PORTB &= ~BV(5); } while (0)
+
+/**
+ * Initialize the specified channel of the DAC for AFSK needs.
+ * The DAC has to be configured in order to call an ISR for every sample sent.
+ * The DAC doesn't have to start the IRQ immediatly but have to wait
+ * the AFSK driver to call AFSK_DAC_IRQ_START().
+ * The ISR must then call afsk_dac_isr() passing the AFSK context.
+ * \param ch DAC channel to be used for AFSK modulation.
+ * \param ctx AFSK context (\see Afsk). This parameter must be saved and
+ * passed back to afsk_dac_isr() for every convertion.
+ */
+#define AFSK_DAC_INIT(ch, ctx) do { (void)ch, (void)ctx; DDRD |= 0xF0; DDRB |= BV(3); } while (0)
+
+/**
+ * Start DAC convertions on channel \a ch.
+ * \param ch DAC channel.
+ */
+#define AFSK_DAC_IRQ_START(ch) do { (void)ch; extern bool hw_afsk_dac_isr; PORTB |= BV(3); hw_afsk_dac_isr = true; } while (0)
+
+/**
+ * Stop DAC convertions on channel \a ch.
+ * \param ch DAC channel.
+ */
+#define AFSK_DAC_IRQ_STOP(ch) do { (void)ch; extern bool hw_afsk_dac_isr; PORTB &= ~BV(3); hw_afsk_dac_isr = false; } while (0)
+
+#endif /* HW_AFSK_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Buzzer hardware-specific definitions
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_BUZZER_H
+#define HW_BUZZER_H
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define BUZZER_BIT 1
+#define IS_BUZZER_ON 0
+#define BUZZER_HW_INIT do { /* Implement me! */ } while (0)
+#define BUZZER_ON do { /* Implement me! */ } while (0)
+#define BUZZER_OFF do { /* Implement me! */ } while (0)
+
+#endif /* HW_BUZZER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Dataflash HW control routines.
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#include "hw/hw_dataflash.h"
+
+#include <cfg/compiler.h>
+#include <cfg/module.h>
+#include <cfg/macros.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+MOD_DEFINE(hw_dataflash);
+
+/**
+ * Data flash init function.
+ *
+ * This function provide to initialize all that
+ * needs to drive a dataflash memory.
+ * Generaly needs to init pins to drive a CS line
+ * and reset line.
+ */
+void dataflash_hw_init(void)
+{
+
+ //Disable CS line (remove if not needed)
+ dataflash_hw_setCS(false);
+
+ /*
+ * Put here your code!
+ *
+ * Note:
+ * - if you drive manualy CS line, here init a CS pin
+ * - if you use a dedicated reset line, here init a reset pin
+ */
+
+ MOD_INIT(hw_dataflash);
+}
+
+/**
+ * Chip Select drive.
+ *
+ * This function enable or disable a CS line.
+ * You must implement this function comply to a dataflash
+ * memory datasheet to allow the drive to enable a memory
+ * when \p enable flag is true, and disable it when is false.
+ */
+void dataflash_hw_setCS(bool enable)
+{
+ if (enable)
+ {
+ /*
+ * Put here your code to enable
+ * dataflash memory
+ */
+ }
+ else
+ {
+ /*
+ * Put here your code to disable
+ * dataflash memory
+ */
+ }
+}
+
+/**
+ * Reset data flash memory.
+ *
+ * This function provide to send reset signal to
+ * dataflash memory. You must impement it comly to a dataflash
+ * memory datasheet to allow the drive to set a reset pin
+ * when \p enable flag is true, and disable it when is false.
+ *
+ */
+void dataflash_hw_setReset(bool enable)
+{
+ if (enable)
+ {
+ /*
+ * Put here your code to set reset of
+ * dataflash memory
+ */
+ }
+ else
+ {
+ /*
+ * Put here your code to clear reset of
+ * dataflash memory
+ */
+ }
+}
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Dataflash HW control routines (interface).
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_DATAFLASH_H
+#define HW_DATAFLASH_H
+
+#include <cfg/compiler.h>
+
+void dataflash_hw_init(void);
+void dataflash_hw_setCS(bool enable);
+void dataflash_hw_setReset(bool enable);
+
+#endif /* HW_DATAFLASH_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief DC motor hardware-specific definitions
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_DC_MOTOR_H
+#define HW_DC_MOTOR_H
+
+typedef enum MotorDCMap
+{
+
+ /* Put here motor dc declaration */
+ MOTOR_DC_CNT
+
+} MotorDCMap;
+
+/*
+ * Init all pin and device to manage dc motor.
+ */
+#define MOTOR_DC_INIT() \
+ do { \
+ /* Implement me! */ \
+ } while (0)
+
+
+/*
+ * Enable DC motor.
+ */
+#define DC_MOTOR_ENABLE(dev) \
+ do { \
+ /* Implement me! */ \
+ } while (0)
+
+/*
+ * Disable DC motor.
+ */
+#define DC_MOTOR_DISABLE(dev) \
+ do { \
+ /* Implement me! */ \
+ } while (0)
+
+/*
+ * Set direction for DC motor.
+ */
+#define DC_MOTOR_SET_DIR(dev, dir) \
+ do { \
+ /* Implement me! */ \
+ } while (0)
+
+
+#endif /* HW_DC_MOTOR_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief FT245RL USB interface hardware-specific definitions
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_FT245RL_H
+#define HW_FT245RL_H
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define FT245RL_DATA_IN() /* Implement me! */
+#define FT245RL_DATA_OUT() /* Implement me! */
+#define WR_HI /* Implement me! */
+#define WR_LO /* Implement me! */
+
+#define RD_HI /* Implement me! */
+#define RD_LO /* Implement me! */
+
+#define FT245RL_INIT() \
+do \
+{ \
+ /* Implement me! */ \
+} while(0)
+
+#define FT245RL_DATA_RDY() (/* Implement me! */ false)
+#define FT245RL_GETDATA() ({/* Implement me! */ (0);})
+#define FT245RL_TX_ALLOWED() (/* Implement me! */ false)
+#define FT245RL_SETDATA(data) do {/* Implement me! */ (void)((data)); } while(0)
+
+#endif /* HW_FT245RL_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Macro for I2C bitbang operation.
+ *
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_I2C_BITBANG_H
+#define HW_I2C_BITBANG_H
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define SDA_HI do { /* Implement me:Set SDA High by setting SDA pin as input */ } while (0)
+#define SDA_LO do { /* Implement me:Set SDA Low by setting SDA pin as open collector output */ } while (0)
+#define SCL_HI do { /* Implement me:Set SCL High by setting SCL pin as input */ } while (0)
+#define SCL_LO do { /* Implement me:Set SCL Low by setting SCL pin as open collector output */ } while (0)
+
+
+#define SCL_IN (true) /* Implement me: read SDA pin state */
+#define SDA_IN (true) /* Implement me: read SCL pin state */
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+#define I2C_BITBANG_HW_INIT do { /* Implement me! */ } while (0)
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+#define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
+
+
+/*
+ * New api
+ */
+#include <cfg/compiler.h>
+
+INLINE void i2c_sdaHi(int dev)
+{
+ (void)(dev);
+ /* Implement me:Set SDA High by setting SDA pin as input */
+}
+
+INLINE void i2c_sdaLo(int dev)
+{
+ (void)(dev);
+ /* Implement me:Set SDA Low by setting SDA pin as open collector output */
+}
+
+INLINE void i2c_sclHi(int dev)
+{
+ (void)(dev);
+ /* Implement me:Set SCL High by setting SCL pin as input */
+}
+
+INLINE void i2c_sclLo(int dev)
+{
+ (void)(dev);
+ /* Implement me:Set SCL Low by setting SCL pin as open collector output */
+}
+
+INLINE bool i2c_sdaIn(int dev)
+{
+ (void)(dev);
+ /* Implement me: read SDA pin state */
+ return true;
+}
+
+INLINE bool i2c_sclIn(int dev)
+{
+ (void)(dev);
+ /* Implement me: read SCL pin state */
+ return true;
+}
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+INLINE void i2c_halfbitDelay(int dev)
+{
+ (void)(dev);
+ /* Implement me! */
+}
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+INLINE void i2c_bitbangInit(int dev)
+{
+ (void)(dev);
+ /* Implement me! */
+}
+
+#endif /* HW_I2C_BITBANG_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Keyboard hardware-specific definitions
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ * \author Stefano Fedrigo <a@develer.com>
+ */
+
+#ifndef HW_KBD_H
+#define HW_KBD_H
+
+#include "hw/kbd_map.h"
+
+#include <cfg/macros.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define K_RPT_MASK (K_UP | K_DOWN | K_OK | K_CANCEL)
+
+#define KBD_HW_INIT \
+ do { \
+ /* Put here code to init hw */ \
+ } while (0)
+
+EXTERN_C int emul_kbdReadCols(void);
+
+/**
+ * Read the keyboard ports and return the mask of
+ * depressed keys.
+ */
+INLINE keymask_t kbd_readkeys(void)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ return 0;
+}
+
+#endif /* HW_KBD_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2010 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
+ *
+ * -->
+ *
+ * \brief Displaytech 32122A LCD driver
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ */
+
+#ifndef HW_LCD_32122A_H
+#define HW_LCD_32122A_H
+
+#include <cpu/types.h>
+#include <cpu/irq.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+/**
+ * Predefined LCD PWM contrast values
+ */
+#define LCD_DEF_PWM 145
+#define LCD_MAX_PWM 505
+#define LCD_MIN_PWM 130
+#define LCD_PWM_CH 0
+
+
+/**
+ * \name LCD I/O pins/ports
+ * @{
+ */
+#define LCD_RS /* Implement me! */
+#define LCD_RW /* Implement me! */
+#define LCD_PE_E1 /* Implement me! */
+#define LCD_PE_E2 /* Implement me! */
+#define LCD_DB0 /* Implement me! */
+#define LCD_DB1 /* Implement me! */
+#define LCD_DB2 /* Implement me! */
+#define LCD_DB3 /* Implement me! */
+#define LCD_DB4 /* Implement me! */
+#define LCD_DB5 /* Implement me! */
+#define LCD_DB6 /* Implement me! */
+#define LCD_DB7 /* Implement me! */
+#define LCD_PF_DB0 /* Implment me! */
+/*@}*/
+
+/**
+ * \name LCD bus control macros
+ * @{
+ */
+#define LCD_CLR_A0 do { /* Implement me! */ } while (0)
+#define LCD_SET_A0 do { /* Implement me! */ } while (0)
+#define LCD_CLR_RD do { /* Implement me! */ } while (0)
+#define LCD_SET_RD do { /* Implement me! */ } while (0)
+#define LCD_CLR_E1 do { /* Implement me! */ } while (0)
+#define LCD_SET_E1 do { /* Implement me! */ } while (0)
+#define LCD_CLR_E2 do { /* Implement me! */ } while (0)
+#define LCD_SET_E2 do { /* Implement me! */ } while (0)
+#define LCD_SET_E(x) do { (void)x; /* Implement me! */ } while (0)
+#define LCD_CLR_E(x) do { (void)x; /* Implement me! */ } while (0)
+/*@}*/
+
+/**
+ * \name Chip select bits for LCD_SET_E()
+ * @{
+ */
+#define LCDF_E1 ( 0/* Implement me! */)
+#define LCDF_E2 ( 0/* Implement me! */)
+/*@}*/
+/** Read from the LCD data bus (DB[0-7]) */
+#define LCD_WRITE(x) ((void)x)/* Implement me! */
+/** Write to the LCD data bus (DB[0-7]) */
+#define LCD_READ (0 /* Implement me! */ )
+
+/** Set data bus direction to output (write to display) */
+#define LCD_DB_OUT /* Implement me! */
+
+/** Set data bus direction to input (read from display) */
+#define LCD_DB_IN /* Implement me! */
+
+/** Delay for write (Enable pulse width, 220ns) */
+#define LCD_DELAY_WRITE \
+ do { \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ } while (0)
+
+/** Delay for read (Data ouput delay time, 120ns) */
+#define LCD_DELAY_READ \
+ do { \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ } while (0)
+
+
+#define LCD_32122_RESET() do { /* Implement me! */ } while (0)
+
+INLINE void lcd_32122a_hw_bus_init(void)
+{
+ cpu_flags_t flags;
+ IRQ_SAVE_DISABLE(flags);
+
+ /*
+ * Here set bus pin!
+ * to init a lcd device.
+ *
+ */
+
+ /*
+ * Data bus is in output state most of the time:
+ * LCD r/w functions assume it is left in output state
+ */
+ LCD_DB_OUT;
+
+
+ IRQ_RESTORE(flags);
+}
+
+#endif /* HW_LCD_32122A_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
+ *
+ * -->
+ *
+ * \brief LCD low-level hardware macros
+ *
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ */
+
+#ifndef HW_LCD_HD44_H
+#define HW_LCD_HD44_H
+
+#include "cfg/cfg_lcd_hd44.h" /* CONFIG_LCD_4BIT */
+
+#include <cpu/types.h>
+#include <cpu/irq.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+/**
+ * \name LCD I/O pins/ports
+ * @{
+ */
+#define LCD_RS /* Implement me! */
+#define LCD_RW /* Implement me! */
+#define LCD_E /* Implement me! */
+#define LCD_DB0 /* Implement me! */
+#define LCD_DB1 /* Implement me! */
+#define LCD_DB2 /* Implement me! */
+#define LCD_DB3 /* Implement me! */
+#define LCD_DB4 /* Implement me! */
+#define LCD_DB5 /* Implement me! */
+#define LCD_DB6 /* Implement me! */
+#define LCD_DB7 /* Implement me! */
+/*@}*/
+
+/**
+ * \name DB high nibble (DB[4-7])
+ * @{
+ */
+
+#if CONFIG_LCD_4BIT
+ #define LCD_MASK (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4)
+ #define LCD_SHIFT 4
+#else
+ #define LCD_MASK (uint8_t)0xff
+ #define LCD_SHIFT 0
+#endif
+/*@}*/
+
+/**
+ * \name LCD bus control macros
+ * @{
+ */
+#define LCD_CLR_RS /* Implement me! */
+#define LCD_SET_RS /* Implement me! */
+#define LCD_CLR_RD /* Implement me! */
+#define LCD_SET_RD /* Implement me! */
+#define LCD_CLR_E /* Implement me! */
+#define LCD_SET_E /* Implement me! */
+
+/* Enter command mode */
+#define LCD_SET_COMMAND() /* Implement me! */
+
+/* Enter data mode */
+#define LCD_SET_DATA() /* Implement me! */
+
+#if CONFIG_LCD_4BIT
+ #define LCD_WRITE_H(x) ((void)x)/* Implement me! */
+ #define LCD_WRITE_L(x) ((void)x)/* Implement me! */
+ #define LCD_READ_H ( 0 /* Implement me! */ )
+ #define LCD_READ_L ( 0 /* Implement me! */ )
+#else
+ #define LCD_WRITE(x) ((void)x)/* Implement me! */
+ #define LCD_READ (0 /* Implement me! */ )
+#endif
+/*@}*/
+
+/** Set data bus direction to output (write to display) */
+#define LCD_DB_OUT /* Implement me! */
+
+/** Set data bus direction to input (read from display) */
+#define LCD_DB_IN /* Implement me! */
+/** Delay for write (Enable pulse width, 220ns) */
+#define LCD_DELAY_WRITE \
+ do { \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ } while (0)
+
+/** Delay for read (Data ouput delay time, 120ns) */
+#define LCD_DELAY_READ \
+ do { \
+ NOP; \
+ NOP; \
+ NOP; \
+ NOP; \
+ } while (0)
+
+
+
+INLINE void lcd_hd44_hw_bus_init(void)
+{
+ cpu_flags_t flags;
+ IRQ_SAVE_DISABLE(flags);
+
+ /*
+ * Here set bus pin!
+ * to init a lcd device.
+ *
+ */
+
+ /*
+ * Data bus is in output state most of the time:
+ * LCD r/w functions assume it is left in output state
+ */
+ LCD_DB_OUT;
+
+
+ IRQ_RESTORE(flags);
+}
+
+#endif /* HW_LCD_HD44_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Led on/off macros.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_LED_H
+#define HW_LED_H
+
+#include <avr/io.h>
+
+#define LED_ON() PORTB |= BV(5)
+#define LED_OFF() PORTB &= ~BV(5)
+#define LED_INIT() DDRB |= BV(5)
+
+#endif /* HW_LED_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Hardware macro definition.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_LM75_H
+#define HW_LM75_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+#define LM75_HW_INIT() \
+ do { \
+ /* Pin init */\
+ } while (0)
+
+#endif /* HW_LM75_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief MCP41 hardware-specific definitions
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#include "hw/hw_mcp41.h"
+
+#include <cfg/macros.h>
+#include <cfg/compiler.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+const uint16_t mcp41_ports[MCP41_CNT] =
+{
+ 0, /* add here mcp41 ports */
+};
+const uint8_t mcp41_pins [MCP41_CNT] =
+{
+ 0, /* add here mcp41 ports */
+};
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2005 Develer S.r.l. (http://www.develer.com/)
+ * -->
+ *
+ * \brief MCP41 hardware-specific definitions
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_MCP41_H
+#define HW_MCP41_H
+
+#include "hw/mcp41_map.h"
+
+#include <cfg/compiler.h>
+
+
+#warning TODO:This is an example implementation, you must implement it!
+
+
+INLINE void SET_MCP41_DDR(Mcp41Dev dev)
+{
+ /* Implement me! */
+ //Warning: this funtions is like avr target name,
+ //fix it to comply for all target.
+
+ //Only for test remove when implement this function
+ (void)dev;
+}
+
+INLINE void MCP41_ON(Mcp41Dev i)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ (void)i;
+}
+
+INLINE void MCP41_OFF(Mcp41Dev i)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ (void)i;
+}
+
+#endif /* HW_MCP41_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief NTC hardware-specific definition
+ *
+ * \author Lorenzo Berni <duplo@develer.com>
+ *
+ */
+
+#include <drv/ntc.h>
+#include "hw/ntc_map.h"
+
+const res_t NTC_RSER[NTC_CNT];
+const res_t NTC_RPAR[NTC_CNT];
+const amp_t NTC_AMP[NTC_CNT];
+const NtcHwInfo* NTC_INFO[NTC_CNT];
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief NTC hardware-specific definition
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ *
+ * A NTC acts as a variable resistor, whose resistance changes as a
+ * function of the temperature it measures. To sample it correctly, it is
+ * usually parallelized and serialized with two fixed resistor. The following diagram shows
+ * what is the exact disposition of the components, as handled by this
+ * library:
+ *
+ *<pre>
+ * o Vref
+ * |
+ * | o Vref
+ * | |
+ * ----- |
+ * | | ---------
+ * | Rser| | |
+ * | | | |
+ * ----- ----- | ADC |
+ * | Vp | | | |
+ * -----------|------| Amp |-------------| |
+ * | | | | Vadc | |
+ * ----- ----- ----- ---------
+ * | | | |
+ * | NTC | | Rpar|
+ * | | | |
+ * ----- -----
+ * | |
+ * | |
+ * ----- -----
+ * --- ---
+ *</pre>
+ * Amp is an amplifier that amplify of AMP times the signal.
+ * If we indicate Rp as the parallel of NTC with Rpar, ADCBITS as the bits of the ad converter
+ * and ADCVAL as the result from the adc convertion (Not Vadc but just the value read
+ * from the adc register), after various calculation, the expression of Rp is:
+ *
+ *<pre>
+ *
+ * ADCVAL * Rser
+ * Rp = ------------------------
+ * ADCBITS
+ * 2 * AMP - ADCVAL
+ *</pre>
+ *
+ * And after that NTC obvisiously is:
+ *<pre>
+ * Rpar * Rp
+ * NTC = ----------
+ * Rpar - Rp
+ *</pre>
+ *
+ *
+ * The function ntc_hw_read() compute the resistence using these formulas above.
+ */
+
+#ifndef HW_NTC_H
+#define HW_NTC_H
+
+#include "ntc_map.h"
+
+#include <cfg/debug.h>
+
+#include <drv/ntc.h>
+#include <drv/adc.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+extern const res_t NTC_RSER[NTC_CNT];
+extern const res_t NTC_RPAR[NTC_CNT];
+extern const amp_t NTC_AMP[NTC_CNT];
+extern const NtcHwInfo* NTC_INFO[NTC_CNT];
+
+
+/*!
+ * Read the resistence of ntc device \a dev.
+ * Return the result in res_t type.
+ */
+INLINE res_t ntc_hw_read(NtcDev dev)
+{
+ ASSERT(dev < NTC_CNT);
+ // See above for formula explanation.
+ adcread_t adcval = adc_read((uint16_t)dev);
+ float rp = (adcval * NTC_RSER[dev] ) / ((1 << adc_bits()) * NTC_AMP[dev] - adcval);
+
+ //kprintf("Rp[%f], Rntc[%f]\n", rp/100, ((NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp)) / 100.0);
+
+ return ( (NTC_RPAR[dev] * rp) / (NTC_RPAR[dev] - rp) );
+}
+
+
+/*!
+ * Return the info (aka the table) associated with ntc device \a dev.
+ */
+INLINE const NtcHwInfo* ntc_hw_getInfo(NtcDev dev)
+{
+ return NTC_INFO[dev];
+}
+
+#define NTC_HW_INIT do { /* Implement me! */ } while(0)
+
+#endif /* HW_NTC_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Phase control hardware-specific definitions
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_PHASE_H
+#define HW_PHASE_H
+
+#include "hw/hw_phase.h"
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#endif /* HW_PHASE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief Phase control hardware-specific definitions
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_PHASE_H
+#define HW_PHASE_H
+
+#include "hw/phase_map.h"
+
+#include <cfg/compiler.h>
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define PHASE_HW_INIT do { /* Implement me! */ }while (0)
+
+INLINE void TRIAC_OFF(TriacDev i)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ (void)i;
+}
+
+
+INLINE void TRIAC_ON(TriacDev i)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ (void)i;
+}
+
+INLINE void SET_TRIAC_DDR(TriacDev i)
+{
+ /* Implement me! */
+
+ //Only for test remove when implement this function
+ (void)i;
+}
+
+void zerocross_isr(void);
+#define DEFINE_ZEROCROSS_ISR() void zerocross_isr(void)
+
+
+#endif /* HW_PHASE_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \brief LM3S1986: OLED-RIT-128x96 (P14201) low-level hardware macros
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ */
+
+#ifndef HW_RIT128x96_H
+#define HW_RIT128x96_H
+
+#include "cfg/macros.h" /* BV() */
+#include "cfg/debug.h"
+
+#include <cpu/attr.h>
+#include <cpu/irq.h>
+#include <cpu/types.h>
+
+/**
+ * \name LCD I/O pins/ports
+ * @{
+ */
+/* OLED Data/Command control pin */
+#define GPIO_OLEDDC_PIN 0 /* Implement me! */
+
+/* OLED enable pin */
+#define GPIO_OLEDEN_PIN 0 /* Implement me! */
+/*@}*/
+
+/**
+ * \name LCD bus control macros
+ * @{
+ */
+/* Enter command mode */
+#define LCD_SET_COMMAND() /* Implement me! */
+
+/* Enter data mode */
+#define LCD_SET_DATA() /* Implement me! */
+
+/* Send data to the display */
+#define LCD_WRITE(x) ((void)x)/* Implement me! */
+/*@}*/
+
+INLINE void lcd_rit128x96_hw_bus_init(void)
+{
+ /* Implement me! */
+}
+
+#endif /* HW_RIT128x96_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief SD driver hardware-specific definitions.
+ *
+ *
+ * \author Luca Ottaviano <lottaviano@develer.com>
+ */
+
+#ifndef HW_SD_H
+#define HW_SD_H
+
+#warning FIXME: This is an example implementation, you must implement it
+
+#define SD_CS_INIT() do { /* implement me */} while(0)
+#define SD_CS_ON() do { /* implement me */} while(0)
+#define SD_CS_OFF() do { /* implement me */} while(0)
+
+#define SD_PIN_INIT() do { /* implement me */} while(0)
+#define SD_CARD_PRESENT() true /* implement me */
+#define SD_WRITE_PROTECT() false /* implement me */
+
+#endif /* HW_SD_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Serial hardware-specific definitions
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_SER_H
+#define HW_SER_H
+
+#include "cfg/cfg_ser.h"
+
+#if CONFIG_SER_STROBE
+ #warning FIXME: this is an example implementation, you must implement it
+
+ #define SER_STROBE_INIT do { /* implement me */ } while (0)
+ #define SER_STROBE_ON do { /* implement me */ } while (0)
+ #define SER_STROBE_OFF do { /* implement me */ } while (0)
+#endif
+
+#endif /* HW_SER_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2006, 2008, 2009 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Macro for HW_SIPO_H
+ *
+ *
+ *
+ * \author Andrea Grandi <andrea@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_SIPO_H
+#define HW_SIPO_H
+
+/**
+ * Map sipo connection on board.
+ */
+typedef enum SipoMap
+{
+ SIPO_CNT
+} SipoMap;
+
+/**
+ * Define generic macro to set pins logic level
+ */
+#define SIPO_SET_LEVEL_LOW(dev) do { /* Implement me! */ } while (0)
+#define SIPO_SET_LEVEL_HIGH(dev) do { /* Implement me! */ } while (0)
+
+
+/**
+ * Generate one low pulse on select line.
+ */
+#define PULSE_LOW(dev) do { /* Implement me! */ } while (0)
+
+/**
+ * Generate one hight pulse on select line.
+ */
+#define PULSE_HIGH(dev) do { /* Implement me! */ } while (0)
+
+
+/**
+ * Define the procedure to drive serial input in sipo device (SI).
+ */
+#define SIPO_SI_HIGH() do { /* Implement me! */ } while (0)
+#define SIPO_SI_LOW() do { /* Implement me! */ } while (0)
+
+/**
+ * Drive clock to shift SI data into latch.
+ */
+#define SIPO_SI_CLOCK(clk_pol) \
+ do { \
+ (void)clk_pol; \
+ /* Implement me! */ \
+ } while (0)
+
+/**
+ * Do everything needed in order to load dato into sipo.
+ */
+#define SIPO_LOAD(device, load_pol) do { /* Implement me! */ } while (0)
+
+/**
+ * Enable the shift register output.
+ */
+#define SIPO_ENABLE() do { /* Implement me! */ } while (0)
+
+/**
+ * Set polarity for Load, Clk, SI signals.
+ */
+#define SIPO_SET_LD_LEVEL(device, load_pol) do { /* Implement me! */ } while (0)
+#define SIPO_SET_CLK_LEVEL(clock_pol) do { /* Implement me! */ } while (0)
+#define SIPO_SET_SI_LEVEL() do { /* Implement me! */ } while (0)
+
+/**
+ * Do anything that needed to init sipo pins.
+ */
+#define SIPO_INIT_PIN() do { /* Implement me! */ } while (0)
+
+#endif /* HW_SIPO_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Hardware macro definition.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_SPI_H
+#define HW_SPI_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+#include <cfg/macros.h>
+
+/**
+ * SPI pin definition.
+ *
+ * \note CS is assert when level
+ * is low.
+ *
+ * \{
+ */
+#define CS /* pin */ ///Connect to CS pin of Flash memory.
+#define SCK /* pin */ ///Connect to SCK pin of Flash memory.
+#define MOSI /* pin */ ///Connect to SI pin of Flash memory.
+#define MISO /* pin */ ///Connect to SO pin of Flash memory.
+#define SPI_PORT /* pin */ ///Micro pin PORT register.
+#define SPI_PIN /* pin */ ///Micro pin PIN register.
+#define SPI_DDR /* pin */ ///Micro pin DDR register.
+/*\}*/
+
+/**
+ * Pin logic level.
+ *
+ * \{
+ */
+#define MOSI_LOW() do { /* Implement me! */ } while(0)
+#define MOSI_HIGH() do { /* Implement me! */ } while(0)
+#define MISO_HIGH() do { /* Implement me! */ } while(0)
+#define SCK_LOW() do { /* Implement me! */ } while(0)
+#define SCK_HIGH() do { /* Implement me! */ } while(0)
+#define CS_LOW() do { /* Implement me! */ } while(0)
+#define CS_HIGH() do { /* Implement me! */ } while(0)
+/*\}*/
+
+/**
+ * SPI pin commands.
+ *
+ * \{
+ */
+#define CS_ENABLE() CS_LOW()
+#define CS_DISABLE() CS_HIGH()
+#define SS_ACTIVE() CS_LOW()
+#define SS_INACTIVE() CS_HIGH()
+#define SCK_INACTIVE() SCK_LOW()
+#define SCK_ACTIVE() SCK_HIGH()
+#define CS_OUT() do { /* Implement me! */ } while(0)
+#define MOSI_IN() do { /* Implement me! */ } while(0)
+#define MOSI_OUT() do { /* Implement me! */ } while(0)
+#define IS_MISO_HIGH() (false /* Implement me! */ )
+#define MISO_IN() do { /* Implement me! */ } while(0)
+#define MISO_OUT() do { /* Implement me! */ } while(0)
+#define SCK_OUT() do { /* Implement me! */ } while(0)
+
+#define SCK_PULSE()\
+ do {\
+ SCK_HIGH();\
+ SCK_LOW();\
+ } while (0)
+/*\}*/
+
+
+#define SPI_HW_INIT() \
+ CS_DISABLE();\
+ MOSI_LOW();\
+ SCK_LOW();\
+ MISO_IN();\
+ MOSI_OUT();\
+ SCK_OUT();\
+ CS_OUT();
+
+#endif /* HW_SPI_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Stepper hardware-specific definitions
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+
+#ifndef HW_STEPPER_H
+#define HW_STEPPER_H
+
+#include <hw/hw_cpufreq.h>
+
+#include <cfg/macros.h>
+
+#include <drv/timer.h>
+
+#warning TODO:This is an example implentation, you must implement it!
+
+#define STEPPER_STROBE_INIT \
+do { \
+ /* put init code for strobe */ \
+} while (0)
+
+
+#define STEPPER_STROBE_ON do { /* Implement me! */ } while(0)
+#define STEPPER_STROBE_OFF do { /* Implement me! */ } while(0)
+
+/**
+ * CPU clock frequency is divided by 2^STEPPER_PRESCALER_LOG2 to
+ * obtain stepper clock.
+ */
+#define STEPPER_PRESCALER_LOG2 1
+
+/**
+ * Stepper timer clock frequency.
+ */
+#define STEPPER_CLOCK ((CPU_FREQ) >> STEPPER_PRESCALER_LOG2)
+
+/**
+ * us delay to reset a stepper motor.
+ * This is the time neccessary to reset
+ * the stepper controll chip. (see datasheet for more detail).
+ */
+#define STEPPER_RESET_DELAY 1
+
+/*
+ * Pins define for each stepper
+ */
+#define STEPPER_1_CW_CCW_PIN 0
+#define STEPPER_1_HALF_FULL_PIN 0
+#define STEPPER_1_CONTROL_PIN 0
+#define STEPPER_1_ENABLE_PIN 0
+#define STEPPER_1_RESET_PIN 0
+
+/* put here other stepper motor */
+
+#define STEPPER_1_SET do { /* Implement me! */ } while(0)
+/* add here the set for other stepper motor */
+
+#define STEPPER_1_CLEAR do { /* Implement me! */ } while(0)
+/* add here the clear for other stepper motor */
+
+/*
+ * Generic macro definition
+ */
+
+/*
+ * Stepper init macro
+ */
+#define STEPPER_PIN_INIT_MACRO(port, index) do { \
+ /* Add here init pin code */ \
+ } while (0)
+
+/*
+ * Stepper commands macros
+ */
+#define STEPPER_SET_CW(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_CCW(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_HALF(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_FULL(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_CONTROL_LOW(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_CONTROL_HIGHT(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_ENABLE(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_DISABLE(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_RESET_ENABLE(index) do { /* Implement me! */ } while (0)
+#define STEPPER_SET_RESET_DISABLE(index) do { /* Implement me! */ } while (0)
+
+
+/*
+ * Reset stepper macro
+ */
+
+#define STEPPER_RESET_MACRO(index) do { \
+ STEPPER_SET_RESET_ENABLE(index); \
+ timer_udelay(STEPPER_RESET_DELAY); \
+ STEPPER_SET_RESET_DISABLE(index); \
+ } while (0)
+
+/*
+ * Set half or full step macro
+ */
+#define STEPPER_SET_STEP_MODE_MACRO(index, flag) do { \
+ if (flag) \
+ STEPPER_SET_HALF(index); \
+ else \
+ STEPPER_SET_FULL(index); \
+ } while (0)
+
+/*
+ * Set control status macro
+ */
+#warning TODO: This macro is not implemented (see below)
+
+#define STEPPER_SET_CONTROL_BIT_MACRO(index, flag) do { \
+ /* if (flag) */ \
+ /* WARNING This macros not implemented */ \
+ /* else */ \
+ /* WARNING This macros not implemented */ \
+ } while (0)
+
+/*
+ * Set current power macro
+ */
+#warning TODO: This macro is not implemented (see below)
+
+#define STEPPER_SET_POWER_CURRENT_MACRO(index, flag) do { \
+ /* if (flag) */ \
+ /* WARNING This macrois not implemented */ \
+ /* else */ \
+ /* WARNING This macrois not implemented */ \
+ } while (0)
+
+/*
+ * Set rotation of stepper motor
+ * - dir = 1: positive rotation
+ * - dir = 0: no motor moviment
+ * - dir = -1: negative rotation
+ *
+ */
+#define STEPPER_SET_DIRECTION_MACRO(index, dir) do { \
+ switch (dir) \
+ { \
+ case 1: \
+ STEPPER_SET_CW(index); \
+ break; \
+ case -1: \
+ STEPPER_SET_CCW(index); \
+ break; \
+ case 0: \
+ break; \
+ } \
+ } while (0)
+
+
+/*
+ * Define macros for manage low level of stepper.
+ */
+
+#define STEPPER_INIT() do { \
+ STEPPER_PIN_INIT_MACRO(A, 1); \
+ /* Add here code for other stepper motor */ \
+ } while (0)
+
+
+/*
+ * Enable select stepper motor
+ */
+#define STEPPER_ENABLE(index) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_ENABLE(1); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+/*
+ * Enable all stepper connect to micro
+ */
+#define STEPPER_ENABLE_ALL() do { \
+ STEPPER_SET_ENABLE(1); \
+ /* Add here code for other stepper motor */ \
+ } while (0)
+
+/*
+ * Disable select stepper motor
+ */
+#define STEPPER_DISABLE(index) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_DISABLE(1); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+/*
+ * Disable all stepper connect to micro
+ */
+#define STEPPER_DISABLE_ALL() do { \
+ STEPPER_SET_DISABLE(1); \
+ /* Add here code for other stepper motor */ \
+ } while (0)
+
+/*
+ * Reset selected stepper motor
+ */
+#define STEPPER_RESET(index) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_RESET_MACRO(1); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+/*
+ * Reset all stepper motor
+ */
+#define STEPPER_RESET_ALL() do { \
+ STEPPER_RESET_MACRO(1) \
+ /* Add here code for other stepper motor */ \
+ } while (0)
+
+// Set half/full step macros
+#define STEPPER_SET_HALF_STEP(index, flag) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_STEP_MODE_MACRO(1, flag); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+
+// Control status
+#define STEPPER_SET_CONTROL_BIT(index, flag) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_CONTROL_BIT_MACRO(1, flag); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+
+// Set stepper power current
+#define STEPPER_SET_POWER_CURRENT(index, flag) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_POWER_CURRENT_MACRO(1, flag); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+// Set rotation dirction of stepper motor
+#define STEPPER_SET_DIRECTION(index, dir) do { \
+ switch (index) \
+ { \
+ case 1: \
+ STEPPER_SET_DIRECTION_MACRO(1, dir); \
+ break; \
+ /* Add here code for other stepper motor */ \
+ } \
+ } while (0)
+
+#endif /* HW_STEPPER_H */
+
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief HW pin handling.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_TAS5706A_H
+#define HW_TAS5706A_H
+
+#include <cfg/macros.h>
+
+#warning FIXME: This is an example implementation, you must implement it
+
+#define TAS5706A_SETPOWERDOWN(val) do { (void) val; /* implement me */ } while (0)
+#define TAS5706A_SETRESET(val) do { (void) val; /* implement me */ } while (0)
+#define TAS5706A_SETMUTE(val) do { (void) val; /* implement me */ } while (0)
+
+#define TAS5706A_PIN_INIT() \
+ do { \
+ TAS5706A_SETPOWERDOWN(true); \
+ TAS5706A_SETRESET(true); \
+ TAS5706A_SETMUTE(true); \
+ /* complete me */ \
+ } while (0)
+
+#define TAS5706A_MCLK_INIT() \
+ do { \
+ /* implement me */ \
+ } while(0)
+
+
+#endif /* HW_TAS5706A_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief thermo hardware-specific control functions.
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ *
+ */
+
+#ifndef HW_THERMO_H
+#define HW_THERMO_H
+
+#include "thermo_map.h"
+#include "ntc_map.h"
+
+#include <drv/phase.h>
+#include <drv/ntc.h>
+
+#include <cfg/debug.h>
+#include <cfg/compiler.h>
+
+#warning TODO:This is an example implentation, you must implement it!
+
+/*!
+ * This function should return the temperature set tolerance.
+ */
+INLINE deg_t thermo_hw_tolerance(ThermoDev dev)
+{
+ ASSERT(dev < THERMO_CNT);
+
+ switch (dev)
+ {
+ case THERMO_TEST:
+ /* Put here convertion function to temperature size */
+ break;
+
+ /* Put here your thermo device */
+
+ default:
+ ASSERT(0);
+ }
+
+ return 0;
+}
+
+
+/*!
+ * This function should return the timeout for reaching the
+ * target temperature.
+ */
+INLINE ticks_t thermo_hw_timeout(ThermoDev dev)
+{
+ ASSERT(dev < THERMO_CNT);
+
+ switch (dev)
+ {
+ case THERMO_TEST:
+ /* return ms_to_ticks(60000); */
+ break;
+
+ /* Put here a time out for select thermo device */
+
+ default:
+ ASSERT(0);
+ }
+
+ return 0;
+}
+
+
+
+/*!
+ * Read the temperature of the hw device \a dev.
+ */
+INLINE deg_t thermo_hw_read(ThermoDev dev)
+{
+ return ntc_read(dev);
+}
+
+
+/*!
+ * Turns off a specific device.
+ * This function is usefull to handle errors.
+ */
+INLINE void thermo_hw_off(ThermoDev dev)
+{
+ ASSERT(dev < THERMO_CNT);
+
+ switch (dev)
+ {
+ case THERMO_TEST:
+ phase_setPower(TRIAC_TEST, 0);
+ break;
+
+ /* Put here a thermo device to turn off */
+
+ default:
+ ASSERT(0);
+ }
+
+}
+
+
+/*!
+ * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific
+ * triac channel and handles the freezer alarm.
+ * It may use also PID control for thermo-regolations.
+ */
+INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp)
+{
+ ASSERT(dev < THERMO_CNT);
+
+ deg_t dist = target - cur_temp;
+ //kprintf("dev[%d], dist[%d]\n", dev, dist);
+
+ switch(dev)
+ {
+ case THERMO_TEST:
+ if (dist > 0)
+ {
+ /* phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */
+ }
+ else
+ {
+ /* phase_setPower(TRIAC_TEST, 0); */
+ }
+ break;
+
+ /* Put here an other thermo device */
+
+ default:
+ ASSERT(0);
+ }
+}
+
+
+#define THERMO_HW_INIT _thermo_hw_init()
+
+/*!
+ * Init hw associated with thermo-control.
+ */
+INLINE void _thermo_hw_init(void)
+{
+ ASSERT(phase_initialized);
+ ASSERT(ntc_initialized);
+
+ phase_setPower(TRIAC_TEST, 0);
+
+ /* Add here the other thermo device */
+}
+
+#endif /* HW_THERMO_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief TLV5816 DAC hardware-specific definitions
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_TLV5816_H
+#define HW_TLV5816_H
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define TLV5618_CSINIT(pin) \
+do \
+{ \
+ (void)pin; \
+ /* Implement me! */ \
+ TLV5618_CSHIGH(pin); \
+} while(0)
+
+#define TLV5618_CSLOW(pin) \
+do \
+{ \
+ (void)pin; \
+ /* Implement me! */ \
+} while(0)
+
+
+#define TLV5618_CSHIGH(pin) \
+do \
+{ \
+ (void)pin; \
+ /* Implement me! */ \
+} while(0)
+
+
+#endif /* HW_TLV5816_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2009 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Hardware macro definition.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_TMP123_H
+#define HW_TMP123_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+#define TMP123_HW_CS_EN() /* Implement me! */
+#define TMP123_HW_CS_DIS() /* Implement me! */
+
+#define TMP123_HW_INIT() \
+ do { \
+ /* Pin init */\
+ } while (0)
+
+#endif /* HW_TMP123_H */
+
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Keyboard map definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ * \author Stefano Fedrigo <a@develer.com>
+ */
+
+#ifndef HW_KBD_MAP_H
+#define HW_KBD_MAP_H
+
+#include <cfg/macros.h>
+
+#warning TODO:This is an example implentation, you must implement it!
+
+
+/**
+ * Type for keyboard mask.
+ */
+typedef uint16_t keymask_t;
+
+/**
+ * \name Keycodes.
+ */
+/*@{*/
+#define K_UP BV(0)
+#define K_DOWN BV(1)
+#define K_OK BV(2)
+#define K_CANCEL BV(3)
+
+#define K_REPEAT BV(13) /**< This is a repeated keyevent. */
+#define K_TIMEOUT BV(14) /**< Fake key event for timeouts. */
+#define K_LONG BV(15)
+/*@}*/
+
+#define K_LNG_MASK 0
+
+#endif /* HW_KBD_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief MCP41 digital potentiometer map definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef MCP41_MAP_H
+#define MCP41_MAP_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+/** \name Enum for mcp41 pot evices.
+ * \{
+ *
+ */
+typedef enum Mcp41Dev
+{
+ MCP41_LED,
+
+ /* put here other mcp41 device */
+
+ MCP41_CNT,
+} Mcp41Dev;
+/* \} */
+
+#endif /* MCP41_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief NTC map definitions.
+ *
+ *
+ * \author Giovanni Bajo <rasky@develer.com>
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef NTC_MAP_H
+#define NTC_MAP_H
+
+#include <cfg/compiler.h>
+
+#warning TODO:This is an example implentation, you must implement it!
+
+/*! \name Enum for ntc devices.
+ * \{
+ */
+typedef enum NtcDev
+{
+ NTC_TEST,
+
+ /* Put here your thermo device */
+
+ NTC_CNT
+} NtcDev;
+/* \} */
+
+#endif /* NTC_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Triac map definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef PHASE_MAP_H
+#define PHASE_MAP_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+/*! \name Enum for triac devices.
+ * \{
+ */
+typedef enum TriacDev
+{
+ TRIAC_TEST,
+
+ /* Put here other triac device */
+
+ TRIAC_CNT
+} TriacDev;
+/* \} */
+
+#endif /* PHASE_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ *
+ * \brief PWM map device.
+ *
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef HW_PWM_MAP_H
+#define HW_PWM_MAP_H
+
+#warning TODO:This is an example implentation, you must implement it!
+
+typedef enum
+{
+ PWM_CH0 = 0,
+ PWM_CH1,
+ PWM_CH2,
+ PWM_CH3,
+
+/*
+ * add other PWM channel or
+ * change above.
+ */
+
+ PWM_CNT
+} PwmDev;
+
+#endif /* HW_PWM_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Thermo regulation control map definitions.
+ *
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef THERMO_MAP_H
+#define THERMO_MAP_H
+
+#include <cfg/compiler.h>
+#include <cfg/macros.h>
+
+#warning TODO:This is an example implentation, you must implement it!
+
+typedef uint8_t thermostatus_t;
+
+#define THERMO_OFF 0
+#define THERMO_HEATING BV(0)
+#define THERMO_FREEZING BV(1)
+#define THERMO_TGT_REACH BV(2)
+#define THERMOERRF_NTCSHORT BV(3)
+#define THERMOERRF_NTCOPEN BV(4)
+#define THERMOERRF_TIMEOUT BV(5)
+#define THERMO_ACTIVE BV(6)
+
+#define THERMO_ERRMASK (THERMOERRF_NTCSHORT | THERMOERRF_NTCOPEN | THERMOERRF_TIMEOUT)
+
+typedef enum ThermoDev
+{
+ THERMO_TEST,
+
+ /* Put here your thermo device */
+
+ THERMO_CNT,
+} ThermoDev;
+
+#endif /* THERMO_MAP_H */
--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Andrea Righi <arighi@develer.com>
+ *
+ * \brief Kernel project.
+ *
+ * This is a minimalist kernel project: it just initializes the hardware and
+ * creates an independent process to blink an LED, while the main loop
+ * continues to monitor the stack utilization of all the processes.
+ */
+
+#include "hw/hw_led.h"
+
+#include <cfg/debug.h>
+
+#include <cpu/irq.h>
+#include <cpu/power.h>
+
+#include <drv/timer.h>
+#include <drv/ser.h>
+
+#include <kern/proc.h>
+#include <kern/monitor.h>
+
+static Serial out;
+
+static void init(void)
+{
+ /* Enable all the interrupts */
+ IRQ_ENABLE;
+
+ /* Initialize debugging module (allow kprintf(), etc.) */
+ kdbg_init();
+ /* Initialize system timer */
+ timer_init();
+ /*
+ * XXX: Arduino has a single UART port that was previously
+ * initialized for debugging purpose.
+ * In order to activate the serial driver you should disable
+ * the debugging module.
+ */
+#if 0
+ /* Initialize UART0 */
+ ser_init(&out, SER_UART0);
+ /* Configure UART0 to work at 115.200 bps */
+ ser_setbaudrate(&out, 115200);
+#else
+ (void)out;
+#endif
+ /* Initialize LED driver */
+ LED_INIT();
+
+ /*
+ * Kernel initialization: processes (allow to create and dispatch
+ * processes using proc_new()).
+ */
+ proc_init();
+}
+
+static void NORETURN led_process(void)
+{
+ int i;
+
+ /* Periodically blink the led (toggle each 100 ms) */
+ for (i = 0; ; i = !i)
+ {
+ if (i)
+ LED_ON();
+ else
+ LED_OFF();
+ timer_delay(100);
+ }
+}
+
+int main(void)
+{
+ /* Hardware initialization */
+ init();
+
+ /* Create a new child process */
+ proc_new(led_process, NULL, KERN_MINSTACKSIZE * 2, NULL);
+
+ /*
+ * The main process is kept to periodically report the stack
+ * utilization of all the processes (1 probe per second).
+ */
+ while (1)
+ {
+ monitor_report();
+ timer_delay(1000);
+ }
+}
--- /dev/null
+#
+# Wizard autogenerated makefile.
+# DO NOT EDIT, use the rmslog_user.mk file instead.
+#
+
+# Constants automatically defined by the selected modules
+rmslog_DEBUG = 1
+
+# Our target application
+TRG += rmslog
+
+rmslog_PREFIX = "/usr/bin/avr-"
+
+rmslog_SUFFIX = ""
+
+rmslog_SRC_PATH = rmslog
+
+rmslog_HW_PATH = rmslog
+
+# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CSRC INSTEAD!
+rmslog_WIZARD_CSRC = \
+ bertos/mware/event.c \
+ bertos/kern/sem.c \
+ bertos/kern/monitor.c \
+ bertos/struct/heap.c \
+ bertos/io/kfile.c \
+ bertos/mware/formatwr.c \
+ bertos/cpu/avr/drv/timer_avr.c \
+ bertos/drv/timer.c \
+ bertos/kern/signal.c \
+ bertos/kern/proc.c \
+ bertos/cpu/avr/drv/ser_avr.c \
+ bertos/drv/ser.c \
+ bertos/mware/hex.c \
+ #
+
+# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_PCSRC INSTEAD!
+rmslog_WIZARD_PCSRC = \
+ bertos/mware/formatwr.c \
+ #
+
+# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CPPASRC INSTEAD!
+rmslog_WIZARD_CPPASRC = \
+ bertos/cpu/avr/hw/switch_ctx_avr.S \
+ #
+
+# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_CXXSRC INSTEAD!
+rmslog_WIZARD_CXXSRC = \
+ \
+ #
+
+# Files automatically generated by the wizard. DO NOT EDIT, USE rmslog_USER_ASRC INSTEAD!
+rmslog_WIZARD_ASRC = \
+ \
+ #
+
+rmslog_CPPFLAGS = -D'CPU_FREQ=(16000000UL)' -D'ARCH=(ARCH_DEFAULT)' -D'WIZ_AUTOGEN' -I$(rmslog_HW_PATH) -I$(rmslog_SRC_PATH) $(rmslog_CPU_CPPFLAGS) $(rmslog_USER_CPPFLAGS)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_LDFLAGS = $(rmslog_CPU_LDFLAGS) $(rmslog_WIZARD_LDFLAGS) $(rmslog_USER_LDFLAGS)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_CPPAFLAGS = $(rmslog_CPU_CPPAFLAGS) $(rmslog_WIZARD_CPPAFLAGS) $(rmslog_USER_CPPAFLAGS)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_CSRC = $(rmslog_CPU_CSRC) $(rmslog_WIZARD_CSRC) $(rmslog_USER_CSRC)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_PCSRC = $(rmslog_CPU_PCSRC) $(rmslog_WIZARD_PCSRC) $(rmslog_USER_PCSRC)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_CPPASRC = $(rmslog_CPU_CPPASRC) $(rmslog_WIZARD_CPPASRC) $(rmslog_USER_CPPASRC)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_CXXSRC = $(rmslog_CPU_CXXSRC) $(rmslog_WIZARD_CXXSRC) $(rmslog_USER_CXXSRC)
+
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_ASRC = $(rmslog_CPU_ASRC) $(rmslog_WIZARD_ASRC) $(rmslog_USER_ASRC)
+
+# CPU specific flags and options, defined in the CPU definition files.
+# Automatically generated by the wizard. PLEASE DO NOT EDIT!
+rmslog_MCU = atmega328p
+rmslog_CPU_CPPFLAGS = -Os -Ibertos/cpu/avr/
+rmslog_PROGRAMMER_CPU = atmega328p
+rmslog_STOPFLASH_SCRIPT = bertos/prg_scripts/avr/stopflash.sh
+rmslog_STOPDEBUG_SCRIPT = bertos/prg_scripts/none.sh
+rmslog_DEBUG_SCRIPT = bertos/prg_scripts/nodebug.sh
+rmslog_FLASH_SCRIPT = bertos/prg_scripts/avr/flash.sh
+
+include $(rmslog_SRC_PATH)/rmslog_user.mk
--- /dev/null
+#
+# User makefile.
+# Edit this file to change compiler options and related stuff.
+#
+
+# Programmer interface configuration, see http://dev.bertos.org/wiki/ProgrammerInterface for help
+rmslog_PROGRAMMER_TYPE = none
+rmslog_PROGRAMMER_PORT = none
+
+# Files included by the user.
+rmslog_USER_CSRC = \
+ $(rmslog_SRC_PATH)/main.c \
+ #
+
+# Files included by the user.
+rmslog_USER_PCSRC = \
+ #
+
+# Files included by the user.
+rmslog_USER_CPPASRC = \
+ #
+
+# Files included by the user.
+rmslog_USER_CXXSRC = \
+ #
+
+# Files included by the user.
+rmslog_USER_ASRC = \
+ #
+
+# Flags included by the user.
+rmslog_USER_LDFLAGS = \
+ #
+
+# Flags included by the user.
+rmslog_USER_CPPAFLAGS = \
+ #
+
+# Flags included by the user.
+rmslog_USER_CPPFLAGS = \
+ -fno-strict-aliasing \
+ -fwrapv \
+ #
projects / rmslog.git / commitdiff